Motorola Canopy

[georgew]

Yes, the getCanopyApStats.pl, and it's companion getCanopySmStats.pl are the ones giving me problems.

The scripts work when I run the cron job by hand...


George

[TheWitness]

Shoot me the script.

TheWitness

[georgew]

It's the scripts posted by Adjacent on Mar 28, 2005 4:48 pm, posted to this very thread..

That's why I'm posting to this particular thread, this is where I found the code...

It runs fine when run by hand, but when run out of cron it fails.

[kitt22]

I can't get the perl scripts getCanopyStats.tar .. I wonder if there is other place where I can get hold of them.. also what would I need to use them along the canopy templates if I am uisng cacti on windows platform..
thanks!!!

Raymundo

[abdock]

Hi,

I have the templates working nice all the time, now when i add units the SM counts on AP are blank.

any help !

[Shaman]

Crossing my fingers... I'm just about to embark on this.

I have about 50 APs and over 200 SMs out there. Cacti so far looks to be a nice answer to monitoring them.

[huntman]

adjacent Posted: Mon Mar 28, 2005 4:48 pm Post subject: UPDATE! said that the template would graph traffic (in/out) for the sm but I am unable to see this in cacti. I looked at the pl file and there is no section do to this. The xml files, however are set up to do it.

any help would be appreciated.

[paleck]

Has anyone created a template to query a CMM?

[huntman]

sorry found the Traffic (In/Out) on the create graph screen. duh

[icemannz]

Hi, can anyone give me any info on troubleshooting the following message
I am new to this so please excuse my lack of knowledge,
The scripts were downloaded from an earlier message in this post.
Cacti seems to be running ok as I have been able to graph a Win2003 server. The Cacti system is currently running under FreeBSD 5.4

root@freebsd:~$ /usr/local/bin/php /usr/local/share/cacti/poller.php
Cannot find module (NONE): At line 0 in (none)
/usr/local/share/cacti/scripts/getCanopyApStats.pl: Permission denied
/usr/local/share/cacti/scripts/getCanopyApStats.pl: Permission denied
/usr/local/share/cacti/scripts/getCanopyApStats.pl: Permission denied
/usr/local/share/cacti/scripts/getCanopyApStats.pl: Permission denied
/usr/local/share/cacti/scripts/getCanopyApStats.pl: Permission denied
Cannot find module (NONE): At line 0 in (none)
Cannot find module (NONE): At line 0 in (none)
Cannot find module (NONE): At line 0 in (none)
Cannot find module (NONE): At line 0 in (none)
Cannot find module (NONE): At line 0 in (none)
Cannot find module (NONE): At line 0 in (none)
Cannot find module (NONE): At line 0 in (none)
Cannot find module (NONE): At line 0 in (none)
OK u:0.00 s:0.00 r:1.02
OK u:0.00 s:0.00 r:1.02
OK u:0.00 s:0.00 r:1.02
OK u:0.00 s:0.00 r:1.02
OK u:0.00 s:0.00 r:1.02
OK u:0.00 s:0.00 r:1.02
OK u:0.00 s:0.00 r:1.03
OK u:0.00 s:0.00 r:1.03
11/15/2005 08:47:40 AM - SYSTEM STATS: Time:1.0771 Method:cmd.php Processes:1 Threads:N/A Hosts:3 HostsPerProcess:3 DataSources:9 RRDsProcessed:8

This is currently running under root.
I have checked the rights on the file getCanopyApStats.pl and they are as follows:

ls -l /usr/local/share/cacti/scripts
total 338
-rw------- 1 root www 149 Nov 10 14:41 3com_cable_modem.pl
-rw-r--r-- 1 root www 136606 Nov 11 10:48 cacti_host_template_motorola_canopy_access_point.xml
-rw-r--r-- 1 root www 152566 Nov 11 10:48 cacti_host_template_motorola_canopy_subscriber_module.xml
-rw------- 1 root www 183 Nov 10 14:41 diskfree.pl
-rw------- 1 root www 89 Nov 10 14:41 diskfree.sh
-rw-r--r-- 1 root www 1673 Mar 27 2005 getCanopyApStats.pl
-rw-r--r-- 1 root www 2447 Mar 27 2005 getCanopySmStats.pl
-rw------- 1 root www 119 Nov 10 14:41 linux_memory.pl
-rw------- 1 root www 355 Nov 10 14:41 loadavg.pl
-rw------- 1 root www 236 Nov 10 14:41 loadavg_multi.pl
-rw------- 1 root www 115 Nov 10 14:41 ping.pl
-rwxr-xr-x 1 root www 2129 Nov 10 14:41 query_host_cpu.php
-rwxr-xr-x 1 root www 2029 Nov 10 14:41 query_host_partitions.php
-rw------- 1 root www 840 Nov 10 14:41 query_unix_partitions.pl
-rwxr-xr-x 1 root www 356 Nov 10 14:41 sql.php
-rwxr-xr-x 1 root www 1750 Nov 10 14:41 ss_fping.php
-rwxr-xr-x 1 root www 4243 Nov 10 14:41 ss_host_cpu.php
-rwxr-xr-x 1 root www 3353 Nov 10 14:41 ss_host_disk.php
-rwxr-xr-x 1 root www 951 Nov 10 14:41 ss_sql.php
-rw------- 1 root www 79 Nov 10 14:41 unix_processes.pl
-rw------- 1 root www 232 Nov 10 14:41 unix_tcp_connections.pl
-rw------- 1 root www 228 Nov 10 14:41 unix_users.pl
-rw------- 1 root www 850 Nov 10 14:41 weatherbug.pl
-rw------- 1 root www 188 Nov 10 14:41 webhits.pl

The permissions seem to be the same as other files ?
Any help would be appreciated.

[amd phreak]

Good day all. FWIW, I currently have Cacti running on Debian 2.4.27-2-386. I am using this box to watch over a large Canopy network as well as some Cisco routers and Linux hosts. The second posting of scripts worked flawlessly for me. To install cacti I simply used apt to grab the package, and then followed a guide on configuring the sql information.

[Jerry Richardson]

If this is an obvious problem, I apologize in advance - I am completely new to this.

My configuration is as follows
Win 2003 Server w/IIS
MySQL 5.0
Cacti 0.8.6h
Cactid 0.8.6g
rrdtool 1.2.10 perl 5.8
php 5.1.4

Cacti is installed in the wwwroot
MySQL installed in C:\MySQL


I am currently graphing a Cisco 3600 and 2 Motorola Canopy Backhauls and it all works fine.

I would like to install the AP and SM scripts, however I must be doing something wrong. I downloaded the .xml files, and tried to import them as templates. I get the following error:


Warning: filesize() [function.filesize]: stat failed for C:\WINDOWS\TEMP\phpD8.tmp in C:\Inetpub\wwwroot\Cacti\templates_import.php on line 59

Warning: fread() [function.fread]: Length parameter must be greater than 0 in C:\Inetpub\wwwroot\Cacti\templates_import.php on line 59

Warning: Cannot modify header information - headers already sent by (output started at C:\Inetpub\wwwroot\Cacti\templates_import.php:59) in C:\Inetpub\wwwroot\Cacti\templates_import.php on line 71

since I am pretty clueless i could use a little direction.

thanks

[gandalf]

You may consider some settings of php.ini:

Code: Select all

grep upload /etc/php.ini
; Whether to allow HTTP file uploads.
file_uploads = On
; Temporary directory for HTTP uploaded files (will use system default if not
;upload_tmp_dir =
; Maximum allowed size for uploaded files.
upload_max_filesize = 2M

Options may vary for windows?
Reinhard

[pikes]

Has anyone had the problem where the .pl scripts open themselves up when polling? Each time it polls, I have to close the pl file (it opens in notepad) 4 times then it finishes up. Any idea on how to fix this?

[Jerry Richardson]

I have the Canopy Templates loaded and I have created graphs for the following:
Access Points and SM's
Cacti Interface-Traffic Template = OK

Canopy AP Template:
Ethernet Stat = 1, however the value is reported as 10/half, when it's really 100/full (Not really a big deal)
GPS Stat = 1 so it's OK
Registered SM Count = no data recorded
Temperature = no data recorded

Canopy SM Template:
Ethernet Stat = 1, however the value is reported as 10/half, when it's really 100/full (Not really a big deal)
Jitter = OK
dBm = no data recorded
Session Stat = 1 so it's OK
Temperature = no data recorded

Anyone else have problems like this? Any ideas?

Thanks