[XML] successor to apachestats 0.4

Templates, scripts for templates, scripts and requests for templates.

Moderators: Developers, Moderators

Post Reply
websat
Cacti User
Posts: 70
Joined: Wed Jun 22, 2005 3:00 pm
Contact:

Post by websat »

sorry for the mistake:

D:\wwwroot\cacti>php poller.php
Cannot find module (IP-MIB): At line 0 in (none)
Cannot find module (IF-MIB): At line 0 in (none)
Cannot find module (TCP-MIB): At line 0 in (none)
Cannot find module (UDP-MIB): At line 0 in (none)
Cannot find module (SNMPv2-MIB): At line 0 in (none)
Cannot find module (SNMPv2-SMI): At line 0 in (none)
Cannot find module (UCD-SNMP-MIB): At line 0 in (none)
Cannot find module (UCD-DEMO-MIB): At line 0 in (none)
Cannot find module (SNMP-TARGET-MIB): At line 0 in (none)
Cannot find module (SNMP-VIEW-BASED-ACM-MIB): At line 0 in (none)
Cannot find module (SNMP-COMMUNITY-MIB): At line 0 in (none)
Cannot find module (UCD-DLMOD-MIB): At line 0 in (none)
Cannot find module (SNMP-FRAMEWORK-MIB): At line 0 in (none)
Cannot find module (SNMP-MPD-MIB): At line 0 in (none)
Cannot find module (SNMP-USER-BASED-SM-MIB): At line 0 in (none)
Cannot find module (SNMP-NOTIFICATION-MIB): At line 0 in (none)
Cannot find module (SNMPv2-TM): At line 0 in (none)
06/03/2006 04:36:30 AM - POLLER: Poller[0] DEBUG: About to Spawn a Remote Proces
s [CMD: c:/php/php.exe, ARGS: -q d:/wwwroot/cacti/cmd.php 0 1]
06/03/2006 04:36:31 AM - POLLER: Poller[0] Parsed MULTI output field 'thread_O:0
' [map thread_O->thread_O]
06/03/2006 04:36:31 AM - POLLER: Poller[0] Parsed MULTI output field 'threadC:0'
[map threadC->threadC]
06/03/2006 04:36:31 AM - POLLER: Poller[0] Parsed MULTI output field 'threadD:0'
[map threadD->threadD]
06/03/2006 04:36:31 AM - POLLER: Poller[0] Parsed MULTI output field 'threadG:0'
[map threadG->threadG]
06/03/2006 04:36:31 AM - POLLER: Poller[0] Parsed MULTI output field 'threadI:0'
[map threadI->threadI]
06/03/2006 04:36:31 AM - POLLER: Poller[0] Parsed MULTI output field 'threadK:0'
[map threadK->threadK]
06/03/2006 04:36:31 AM - POLLER: Poller[0] Parsed MULTI output field 'threadL:0'
[map threadL->threadL]
06/03/2006 04:36:31 AM - POLLER: Poller[0] Parsed MULTI output field 'threadR:0'
[map threadR->threadR]
06/03/2006 04:36:31 AM - POLLER: Poller[0] Parsed MULTI output field 'threadS:0'
[map threadS->threadS]
06/03/2006 04:36:31 AM - POLLER: Poller[0] Parsed MULTI output field 'threadW:0'
[map threadW->threadW]
06/03/2006 04:36:31 AM - POLLER: Poller[0] Parsed MULTI output field 'thread_W:0
' [map thread_W->thread_W]
06/03/2006 04:36:31 AM - POLLER: Poller[0] Parsed MULTI output field 'thread_O:0
' [map thread_O->thread_O]
06/03/2006 04:36:31 AM - POLLER: Poller[0] Parsed MULTI output field 'threadC:0'
[map threadC->threadC]
06/03/2006 04:36:31 AM - POLLER: Poller[0] Parsed MULTI output field 'threadD:0'
[map threadD->threadD]
06/03/2006 04:36:31 AM - POLLER: Poller[0] Parsed MULTI output field 'threadG:0'
[map threadG->threadG]
06/03/2006 04:36:31 AM - POLLER: Poller[0] Parsed MULTI output field 'threadI:0'
[map threadI->threadI]
06/03/2006 04:36:31 AM - POLLER: Poller[0] Parsed MULTI output field 'threadK:0'
[map threadK->threadK]
06/03/2006 04:36:31 AM - POLLER: Poller[0] Parsed MULTI output field 'threadL:0'
[map threadL->threadL]
06/03/2006 04:36:31 AM - POLLER: Poller[0] Parsed MULTI output field 'threadR:0'
[map threadR->threadR]
06/03/2006 04:36:31 AM - POLLER: Poller[0] Parsed MULTI output field 'threadS:0'
[map threadS->threadS]
06/03/2006 04:36:31 AM - POLLER: Poller[0] Parsed MULTI output field 'threadW:0'
[map threadW->threadW]
06/03/2006 04:36:31 AM - POLLER: Poller[0] Parsed MULTI output field 'thread_W:0
' [map thread_W->thread_W]
06/03/2006 04:36:31 AM - POLLER: Poller[0] CACTI2RRD: c:/rrdtool/rrdtool.exe upd
ate D:\wwwroot\cacti\rra\localhost_users_8.rrd --template users 1149302190:2
06/03/2006 04:36:31 AM - POLLER: Poller[0] CACTI2RRD: c:/rrdtool/rrdtool.exe upd
ate D:\wwwroot\cacti\rra\localhost_proc_9.rrd --template proc 1149302190:46
06/03/2006 04:36:31 AM - POLLER: Poller[0] CACTI2RRD: c:/rrdtool/rrdtool.exe upd
ate D:\wwwroot\cacti\rra\localhost_hdd_total_10.rrd --template hdd_total:hdd_use
d 1149302190:60817686528:9048752128
06/03/2006 04:36:31 AM - POLLER: Poller[0] CACTI2RRD: c:/rrdtool/rrdtool.exe upd
ate D:\wwwroot\cacti\rra\localhost_hdd_total_11.rrd --template hdd_total:hdd_use
d 1149302190:62693048320:13708652544
06/03/2006 04:36:31 AM - POLLER: Poller[0] CACTI2RRD: c:/rrdtool/rrdtool.exe upd
ate D:\wwwroot\cacti\rra\localhost_hdd_total_12.rrd --template hdd_total:hdd_use
d 1149302190:203921108992:86885990400
06/03/2006 04:36:31 AM - POLLER: Poller[0] CACTI2RRD: c:/rrdtool/rrdtool.exe upd
ate D:\wwwroot\cacti\rra\localhost_hdd_total_13.rrd --template hdd_total:hdd_use
d 1149302190:2580021248:436207616
06/03/2006 04:36:31 AM - POLLER: Poller[0] CACTI2RRD: c:/rrdtool/rrdtool.exe upd
ate D:\wwwroot\cacti\rra\localhost_hdd_total_14.rrd --template hdd_total:hdd_use
d 1149302190:1073152000:261357568
06/03/2006 04:36:31 AM - POLLER: Poller[0] CACTI2RRD: c:/rrdtool/rrdtool.exe upd
ate D:\wwwroot\cacti\rra\localhost_traffic_in_16.rrd --template traffic_out:traf
fic_in 1149302190:1424476:1424476
06/03/2006 04:36:31 AM - POLLER: Poller[0] CACTI2RRD: c:/rrdtool/rrdtool.exe upd
ate D:\wwwroot\cacti\rra\localhost_traffic_in_17.rrd --template traffic_out:traf
fic_in 1149302190:53864:305935
06/03/2006 04:36:31 AM - POLLER: Poller[0] CACTI2RRD: c:/rrdtool/rrdtool.exe upd
ate D:\wwwroot\cacti\rra\localhost_cpuinformprivileged_19.rrd --template cpuinfo
rmUser:cpuinformProcessor:cpuinformPrivileged 1149302190:24:32:8
06/03/2006 04:36:31 AM - POLLER: Poller[0] CACTI2RRD: c:/rrdtool/rrdtool.exe upd
ate D:\wwwroot\cacti\rra\localhost_errors_in_20.rrd --template errors_out:discar
ds_in:discards_out:errors_in 1149302190:0:0:0:0
06/03/2006 04:36:31 AM - POLLER: Poller[0] CACTI2RRD: c:/rrdtool/rrdtool.exe upd
ate D:\wwwroot\cacti\rra\localhost_meminformavailable_22.rrd --template meminfor
mAvailable 1149302190:662028288
06/03/2006 04:36:31 AM - POLLER: Poller[0] CACTI2RRD: c:/rrdtool/rrdtool.exe upd
ate D:\wwwroot\cacti\rra\localhost_meminformcacheres_23.rrd --template meminform
CacheRes 1149302190:39907328
06/03/2006 04:36:31 AM - POLLER: Poller[0] CACTI2RRD: c:/rrdtool/rrdtool.exe upd
ate D:\wwwroot\cacti\rra\localhost_meminforminstalled_24.rrd --template meminfor
mInstalled 1149302190:1048048
06/03/2006 04:36:31 AM - POLLER: Poller[0] CACTI2RRD: c:/rrdtool/rrdtool.exe upd
ate D:\wwwroot\cacti\rra\localhost_meminformpagefaults_25.rrd --template meminfo
rmPageFaults 1149302190:1073
06/03/2006 04:36:31 AM - POLLER: Poller[0] CACTI2RRD: c:/rrdtool/rrdtool.exe upd
ate D:\wwwroot\cacti\rra\localhost_apache_cpuload_26.rrd --template thread_O:thr
eadC:threadD:threadG:threadI:threadK:threadL:threadR:threadS:threadW:thread_W 11
49302190:0:0:0:0:0:0:0:0:0:0:0
06/03/2006 04:36:31 AM - POLLER: Poller[0] CACTI2RRD: c:/rrdtool/rrdtool.exe upd
ate D:\wwwroot\cacti\rra\localhost_apache_cpuload_27.rrd --template thread_O:thr
eadC:threadD:threadG:threadI:threadK:threadL:threadR:threadS:threadW:thread_W 11
49302190:0:0:0:0:0:0:0:0:0:0:0
06/03/2006 04:36:31 AM - POLLER: Poller[0] CACTI2RRD: c:/rrdtool/rrdtool.exe upd
ate D:\wwwroot\cacti\rra\localhost_idle_28.rrd --template 1149302190:U
06/03/2006 04:36:31 AM - SYSTEM STATS: Time:1.2272 Method:cmd.php Processes:1 Th
reads:N/A Hosts:2 HostsPerProcess:2 DataSources:30 RRDsProcessed:18
OK u:0.01 s:0.01 r:0.00
OK u:0.01 s:0.01 r:0.00
OK u:0.01 s:0.01 r:0.00
OK u:0.01 s:0.01 r:0.00
OK u:0.01 s:0.01 r:0.00
OK u:0.01 s:0.01 r:0.03
OK u:0.01 s:0.01 r:0.03
OK u:0.01 s:0.01 r:0.03
OK u:0.01 s:0.01 r:0.03
OK u:0.01 s:0.01 r:0.03
OK u:0.01 s:0.01 r:0.03
OK u:0.01 s:0.01 r:0.04
OK u:0.01 s:0.01 r:0.04
OK u:0.01 s:0.01 r:0.04
OK u:0.01 s:0.01 r:0.04
OK u:0.01 s:0.01 r:0.04
OK u:0.01 s:0.01 r:0.04
ERROR: Not enough arguments
06/03/2006 04:36:31 AM - POLLER: Poller[0] DEBUG: About to Spawn a Remote Proces
s [CMD: c:/php/php.exe, ARGS: -q D:/wwwroot/cacti/poller_export.php]

D:\wwwroot\cacti>
Visit my web site: http://www.websat-telecom.com
User avatar
gandalf
Developer
Posts: 22383
Joined: Thu Dec 02, 2004 2:46 am
Location: Muenster, Germany
Contact:

Post by gandalf »

06/03/2006 04:36:31 AM - POLLER: Poller[0] CACTI2RRD: c:/rrdtool/rrdtool.exe upd
ate D:\wwwroot\cacti\rra\localhost_apache_cpuload_26.rrd --template thread_O:thr
eadC:threadD:threadG:threadI:threadK:threadL:threadR:threadS:threadW:thread_W 11
49302190:0:0:0:0:0:0:0:0:0:0:0
06/03/2006 04:36:31 AM - POLLER: Poller[0] CACTI2RRD: c:/rrdtool/rrdtool.exe upd
ate D:\wwwroot\cacti\rra\localhost_apache_cpuload_27.rrd --template thread_O:thr
eadC:threadD:threadG:threadI:threadK:threadL:threadR:threadS:threadW:thread_W 11
49302190:0:0:0:0:0:0:0:0:0:0:0
shows, that it works "in principle". But all numbers show 0.
Please switch Settings -> Logging Level to DEBUG and retry your last command. You should see the polling script being called and returning data to see the actual numbers. YOu may compare this tothe numbers retrieved when calling the script manually and when accessing the status page manually. Please report your findings
Reinhard
websat
Cacti User
Posts: 70
Joined: Wed Jun 22, 2005 3:00 pm
Contact:

Post by websat »

06/03/2006 05:33:43 PM - POLLER: Poller[0] CACTI2RRD: c:/rrdtool/rrdtool.exe upd
ate D:\wwwroot\cacti\rra\localhost_apache_cpuload_26.rrd --template thread_O:thr
eadC:threadD:threadG:threadI:threadK:threadL:threadR:threadS:threadW:thread_W 11
49348821:0:0:0:0:0:0:0:0:0:0:0
OK u:0.05 s:0.00 r:0.98
06/03/2006 05:33:43 PM - POLLER: Poller[0] CACTI2RRD: c:/rrdtool/rrdtool.exe upd
ate D:\wwwroot\cacti\rra\localhost_apache_cpuload_27.rrd --template thread_O:thr
eadC:threadD:threadG:threadI:threadK:threadL:threadR:threadS:threadW:thread_W 11
49348821:0:0:0:0:0:0:0:0:0:0:0

Total Accesses: 189
Total kBytes: 28430
Uptime: 31539
ReqPerSec: .00599258
BytesPerSec: 923.058
BytesPerReq: 154033
BusyWorkers: 1
IdleWorkers: 249
Scoreboard: _____________

Server Version: Apache/2.2.2 (Win32) PHP/5.1.4
Server Built: Apr 29 2006 18:32:31

Current Time: Saturday, 03-Jun-2006 17:37:24 Paris, Madrid
Restart Time: Saturday, 03-Jun-2006 08:50:31 Paris, Madrid
Parent Server Generation: 0
Server uptime: 8 hours 46 minutes 53 seconds
Total accesses: 190 - Total Traffic: 27.8 MB
.00601 requests/sec - 920 B/second - 149.6 kB/request
1 requests currently being processed, 249 idle workers
Visit my web site: http://www.websat-telecom.com
User avatar
gandalf
Developer
Posts: 22383
Joined: Thu Dec 02, 2004 2:46 am
Location: Muenster, Germany
Contact:

Post by gandalf »

This is not what I requested. It's again only the rrdtool update part, not the script calling part. But from output of server-status?auto it can be seen, that there was no current request processing, so "0" would be ok.
Reinhard
seigo
Posts: 1
Joined: Mon Jun 26, 2006 10:16 am
Location: Tokyo,Japan

script's line problem

Post by seigo »

hi i'm from Tokyo,
and now i try this script,but can't get good.
# ./ws_apachestats.pl localhost
Use of uninitialized value in concatenation (.) or string at ./ws_apachestats.pl line 63.
Use of uninitialized value in concatenation (.) or string at ./ws_apachestats.pl line 65.
Use of uninitialized value in concatenation (.) or string at ./ws_apachestats.pl line 67.
Use of uninitialized value in concatenation (.) or string at ./ws_apachestats.pl line 69.
Use of uninitialized value in split at ./ws_apachestats.pl line 89.
Use of uninitialized value in concatenation (.) or string at ./ws_apachestats.pl line 103.
apache_total_hits: apache_total_kbytes: apache_busy_workers: apache_idle_workers: thread_O:0 threadC:0 threadD:0 threadG:0 threadI:0 threadK:0 threadL:0 threadR:0 threadS:0 threadW:0 thread_W:0 apache_cpulo
same problem after poller.php
#php /var/www/cacti/poller.php
Use of uninitialized value in concatenation (.) or string at /var/www/cacti/scripts/ws_apachestats.pl line 63.
Use of uninitialized value in concatenation (.) or string at /var/www/cacti/scripts/ws_apachestats.pl line 65.
Use of uninitialized value in concatenation (.) or string at /var/www/cacti/scripts/ws_apachestats.pl line 67.
Use of uninitialized value in concatenation (.) or string at /var/www/cacti/scripts/ws_apachestats.pl line 69.
Use of uninitialized value in split at /var/www/cacti/scripts/ws_apachestats.pl line 89.
Use of uninitialized value in concatenation (.) or string at /var/www/cacti/scripts/ws_apachestats.pl line 103.
OS is RedHat ES 4.0,
perl v5.8.5,
php v5.1.4,
apache v2.0.58
cacti-0.8.6h

someone,any idea?
gg234
Cacti User
Posts: 63
Joined: Fri Oct 07, 2005 11:14 am
Contact:

Re: script's line problem

Post by gg234 »

Hi,

I am having the same problem that time i have changed my httpd.conf file setting to below and it status working

ExtendedStatus on

<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from all -- (for testing)
</Location>

Hope this helps
ssozonoff
Posts: 12
Joined: Sat Jul 01, 2006 7:42 am

Re: [XML] successor to apachestats 0.4

Post by ssozonoff »

lvm wrote: Multiple RRDs
Due to the lack of my knowledge of the cacti system, I was not able to suppress the generation of one RRD for each of the Graph Templates. So, if you are going to define all 7 Graph Templates, you will notice 7 RRDs as well.
Regarding this, does anyone know anything about this issue in general? I have the same problem with a different template set I have put together where a datasource gathers data for several graphs. When I creating the graphs via the "device" interface Cacti insists on duplicating the RRD's. This is a real PITA of course. I guess one fix is to have one piece of DATA per RDD per graph but this is far from optimal.

Does anyone have any pointers. Is this a known issue with Cacti? Is there a simple fix or efficient approach to solve this?

Kind thanks,
Serge
nuber
Posts: 3
Joined: Wed Jul 12, 2006 10:51 pm

Showing in m?

Post by nuber »

I recently got this script working for my site. I don't have a busy site, so the ReqPerSec are usually below 1 per second. See below.

Code: Select all

Total Accesses: 891
Total kBytes: 7218
CPULoad: 1.77211
Uptime: 2703
ReqPerSec: .329634
BytesPerSec: 2734.46
BytesPerReq: 8295.43
BusyWorkers: 1
IdleWorkers: 9
However, when the graph is displayed, it shows it in the format of something like 720.32m. What is that supposed to mean? I would expect that the graph would show something like .33 per sec?

Anyone know what's going on?
User avatar
gandalf
Developer
Posts: 22383
Joined: Thu Dec 02, 2004 2:46 am
Location: Muenster, Germany
Contact:

Re: script's line problem

Post by gandalf »

seigo wrote:hi i'm from Tokyo,
and now i try this script,but can't get good.
# ./ws_apachestats.pl localhost
Use of uninitialized value in concatenation (.) or string at ./ws_apachestats.pl line 63.
Use of uninitialized value in concatenation (.) or string at ./ws_apachestats.pl line 65.
Use of uninitialized value in concatenation (.) or string at ./ws_apachestats.pl line 67.
Use of uninitialized value in concatenation (.) or string at ./ws_apachestats.pl line 69.
Use of uninitialized value in split at ./ws_apachestats.pl line 89.
Use of uninitialized value in concatenation (.) or string at ./ws_apachestats.pl line 103.
apache_total_hits: apache_total_kbytes: apache_busy_workers: apache_idle_workers: thread_O:0 threadC:0 threadD:0 threadG:0 threadI:0 threadK:0 threadL:0 threadR:0 threadS:0 threadW:0 thread_W:0 apache_cpulo
Please post the result when accessing the server with url [url]http://<your-server>/server-status?auto[/url] as this is parsed by the perl code
Reinhard
User avatar
gandalf
Developer
Posts: 22383
Joined: Thu Dec 02, 2004 2:46 am
Location: Muenster, Germany
Contact:

Re: script's line problem

Post by gandalf »

gg234 wrote:Hi,

I am having the same problem that time i have changed my httpd.conf file setting to below and it status working

ExtendedStatus on

<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from all -- (for testing)
</Location>

Hope this helps
Yep, server-status must be activated (as stated by Rolf Poser in the original post)
Reinhard
User avatar
gandalf
Developer
Posts: 22383
Joined: Thu Dec 02, 2004 2:46 am
Location: Muenster, Germany
Contact:

Re: [XML] successor to apachestats 0.4

Post by gandalf »

ssozonoff wrote:
lvm wrote: Multiple RRDs
Due to the lack of my knowledge of the cacti system, I was not able to suppress the generation of one RRD for each of the Graph Templates. So, if you are going to define all 7 Graph Templates, you will notice 7 RRDs as well.
Regarding this, does anyone know anything about this issue in general? I have the same problem with a different template set I have put together where a datasource gathers data for several graphs. When I creating the graphs via the "device" interface Cacti insists on duplicating the RRD's. This is a real PITA of course. I guess one fix is to have one piece of DATA per RDD per graph but this is far from optimal.

Does anyone have any pointers. Is this a known issue with Cacti? Is there a simple fix or efficient approach to solve this?

Kind thanks,
Serge
This can be fixed but is tedious. Please do create only the FIRST graph using the "usual" method. This creates ONE set of rrd files. Create all other graphs from Graph Management, speciying Graph Template and Host. You will be prompted with the already existing data sources and may use thme instead of creating new ones.
Reinhard
User avatar
gandalf
Developer
Posts: 22383
Joined: Thu Dec 02, 2004 2:46 am
Location: Muenster, Germany
Contact:

Re: Showing in m?

Post by gandalf »

nuber wrote:I recently got this script working for my site. I don't have a busy site, so the ReqPerSec are usually below 1 per second. See below.

Code: Select all

Total Accesses: 891
Total kBytes: 7218
CPULoad: 1.77211
Uptime: 2703
ReqPerSec: .329634
BytesPerSec: 2734.46
BytesPerReq: 8295.43
BusyWorkers: 1
IdleWorkers: 9
However, when the graph is displayed, it shows it in the format of something like 720.32m. What is that supposed to mean? I would expect that the graph would show something like .33 per sec?

Anyone know what's going on?
Please refer to http://forums.cacti.net/viewtopic.php?t=8168
Reinhard
tarunsood
Posts: 11
Joined: Mon Mar 13, 2006 8:59 am
Location: india
Contact:

Problem partial result

Post by tarunsood »

OK u:0.00 s:0.01 r:0.12
CACTID: Host[34] ERROR: Empty result [xxx.xxx.xxx.xxx]: 'perl /var/www/html/cacti/scripts/ws_apachestats.pl xxx.xxx.xxx.xxx'
CACTID: Host[34] DS[1417] WARNING: Result from SCRIPT not valid. Partial Result: ...
CACTID: Host[34] ERROR: Empty result [xxx.xxx.xxx.xxx]: 'perl /var/www/html/cacti/scripts/ws_apachestats.pl xxx.xxx.xxx.xxx'
CACTID: Host[34] DS[1416] WARNING: Result from SCRIPT not valid. Partial Result: ...
CACTID: Host[34] ERROR: Empty result [xxx.xxx.xxx.xxx]: 'perl /var/www/html/cacti/scripts/ws_apachestats.pl xxx.xxx.xxx.xxx
CACTID: Host[34] DS[1415] WARNING: Result from SCRIPT not valid. Partial Result: ...
OK u:0.00 s:0.01 r:0.13
CACTID: Host[34] ERROR: Empty result [xxx.xxx.xxx.xxx]: 'perl /var/www/html/cacti/scripts/ws_apachestats.pl xxx.xxx.xxx.xxx'
CACTID: Host[34] DS[1414] WARNING: Result from SCRIPT not valid. Partial Result: ...
CACTID: Host[34] ERROR: Empty result [xxx.xxx.xxx.xxx]: 'perl /var/www/html/cacti/scripts/ws_apachestats.pl xxx.xxx.xxx.xxx'
CACTID: Host[34] DS[1418] WARNING: Result from SCRIPT not valid. Partial Result: ...
CACTID: Host[34] ERROR: Empty result [xxx.xxx.xxx.xxx]: 'perl /var/www/html/cacti/scripts/ws_apachestats.pl xxx.xxx.xxx.xxx'
CACTID: Host[34] DS[1419] WARNING: Result from SCRIPT not valid. Partial Result: ...


can any one help me with this i am getting the result when i running the script manually /var/www/html/cacti/scripts/ws_apachestats.pl xxx.xxx.xxx.xxx'
User avatar
gandalf
Developer
Posts: 22383
Joined: Thu Dec 02, 2004 2:46 am
Location: Muenster, Germany
Contact:

Post by gandalf »

This may be due to a path issue with the /path/to/perl in the scripts which needs customization. Also, with latest cactid, all perl Data Input Methods must have /full/path/to/perl
Reinhard
tarunsood
Posts: 11
Joined: Mon Mar 13, 2006 8:59 am
Location: india
Contact:

Thanks

Post by tarunsood »

Hi thanks for the reply the graphs are working fine now
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests