IBM Lotus Notes

qwertz · Post by **qwertz** » Wed Apr 26, 2006 3:07 pm

Hello,

I was wondering if somebody already tried to monitor Lotus Notes data with Cacti

Thanks

Qwertz

Post by **gandalf** » Wed Apr 26, 2006 3:30 pm

Please see http://forums.cacti.net/viewtopic.php?t=12627 and perhaps http://forums.cacti.net/viewtopic.php?t=12396. And let me know your findings

Reinhard

qwertz · Post by **qwertz** » Thu Apr 27, 2006 12:54 am

Thanks for your answer.

I looked at your links and found that a mib for Domino exists.

What need to be installed on the Domino Machine to accept SNMP request? I suppose it's not enough to activate SNMP at the OS level (in my case Windows)

REgards

BQWertz

fmangeant · Post by **fmangeant** » Thu Apr 27, 2006 1:34 am

Hi

you have to install the Notes SNMP "agent" :

Code: Select all

C:\> net stop snmp
C:\> lnsnmp -Sc
C:\> net start snmp
C:\> net start lnsnmp

I'm using it to graph Notes 5.x and 6.x

qwertz · Post by **qwertz** » Fri Apr 28, 2006 6:22 am

THANK YOU VERY MUCH

qwertz · Post by **qwertz** » Sun Apr 30, 2006 2:18 pm

HEllo,
I installed the snmp agent on the Notes server.

I performed the following snmpwalk on my notes server:

snmpwalk -v2c -c "xxx" "IP_add" .1.3.6.1.4.1.334.72

SNMPv2-SMI::enterprises.334.72.2.1.0 = INTEGER: 2
SNMPv2-SMI::enterprises.334.72.2.2.0 = INTEGER: 2
SNMPv2-SMI::enterprises.334.72.2.3.0 = INTEGER: 0
SNMPv2-SMI::enterprises.334.72.2.5.0 = INTEGER: 1
SNMPv2-SMI::enterprises.334.72.2.7.0 = INTEGER: 0
SNMPv2-SMI::enterprises.334.72.100.1.0 = STRING: "6.0"

Now, i see that the SNMP agent on the notes server is running but
The problem i have only 6 possibilities instead of a lot of possibilities ?

Do you know why?

thanks

Qwertz

raddy · Post by **raddy** » Mon May 01, 2006 6:56 am

you need to type:
load quryset
at the domino colsole to send the info to snmp agent. You should add this to you notes.ini file to enable it in case of a server reboot.

I have done up some templates and have been watching them for a while. will post them up when I get back to work. Would like another opinion as I had to create a CDEF for one of the counters that seemed a bit wierd.

qwertz · Post by **qwertz** » Mon May 01, 2006 9:45 am

I would like to thanks all the people who are helping me on this topic !!!!

I will try this command and keep you informed, and of course, i would be interested to see your templates.

Post by **gandalf** » Mon May 01, 2006 10:26 am

raddy wrote:you need to type:
load quryset
at the domino colsole to send the info to snmp agent. You should add this to you notes.ini file to enable it in case of a server reboot.

I have done up some templates and have been watching them for a while. will post them up when I get back to work. Would like another opinion as I had to create a CDEF for one of the counters that seemed a bit wierd.

Would like to check this, but am running 0.8.6g on our production system. If you mind publishing your work, please add the version you were exporting from
Reinhard

qwertz · Post by **qwertz** » Tue May 02, 2006 2:46 am

Thanks raddy, i can now see everything ...

I will try now to make some templates ...

Regards

Qwertz

raddy · Post by **raddy** » Wed May 03, 2006 1:21 am

Try These. They were created under 8.6h

As I mentioned earlier I had to create a CDEF to get the actual displayed count correct but it may just be the way I have done things. Update and post back if you can see a better way of doing things.

raddy · Post by **raddy** » Thu May 04, 2006 2:42 am

I have attached the domino SNMP setup I am using on our servers and added the command to delete the service if required. I have noticed a difference with the reporting between R5 and R6 but as our servers are predominantly R6, I haven't investigated it too deep.

I have also attached a list of the domino OID tree and descriptions of each. These were obtained through the silte link in the text file. I have found this site useful but you have to navigate directly into it rather than trying to access it through the main web page (you'll see what I mean).

It is a nice resource for a number of vendors SNMP info.

qwertz · Post by **qwertz** » Thu May 04, 2006 3:32 am

THANKS THANKS THANKS

Working fine for me on 0.8.6.h

Qwertz

bmerlin347 · Post by **bmerlin347** » Thu May 04, 2006 4:08 am

Just a side note, make sure that the tasks are in the servertasks line so that if you run maintenance off line or reboot the server, it will start automatically in Domino.
I ran into this issue

Ben

qwertz · Post by **qwertz** » Tue May 16, 2006 10:14 am

Hello Raddy, Do you think it would be possible to add in your template a line for total amount of routed mail in a similar way to the total amount of BW in an interface graphe

Thanks

Qwertz

IBM Lotus Notes

IBM Lotus Notes

Who is online