CMTS Cable modem monitoring.

[kanada]

Anyone know how - using cacti - monitoring SNR on all upstream cards?

I was try use SNMP Generic, but seems that not work...

Any ideas? thanks...

[BSOD2600]

Try modifying the docsis template / script I created.

[kanada]

I never create/edit that type of templ.

I was check Your files, for modem seems work ok. I try monitoring CMTS from the other side, not modem but hardware managing this (Can be Cisco or C4). There is one Downstream and couple Upstream cards, i have global SNR OID but dont know how to separate all cards and show on separate graphs.

Can You help me with that?

Thanks..

[skoal]

like this? -> http://forums.cacti.net/viewtopic.php?t=12328

try using the motorola template,it uses the docsis mib 4 the snr-s
but you have to modify the ifIndex part in the xml coz it uses
the motorola mib

[kanada]

Hehe, nice work! its great.. i modify Your templates, works fine.. i thing to use it to monitoring other card parms.. couse i see motorola use standard DOCSIS OIDs.

Can i write to You if i will have some problems skoal?

Greetz!

[oscar.sanabria]

I used the templates but that did not created any graph for SNR. That template created graphs for CM Online and Offline for every Upstream Port but not for my SNR in every Upstream Port.
You Can help me with this issue.

I need graphing SNR in every Upstream Port. I have monitoring CM Online and Offline yet.

[kanada]

For monitoring SNR on every Upstream card You must load a interface template (skoal give simple version in pack). See logs, set Cacti in debug mode.. any errors etc?

[oscar.sanabria]

Thanks for you reply.

When i utilize BSR100 stat data query. this dont create graphs for SNR, only created graphs for CM online for Upstream and Downstream port, besides, the graphs for down port don take data, is empty the graphs, without data. (For Upstream port the CM online work good! )
Dont forget that i need graphing SNR in every Upstream Port.
Thanks a lot for u help.

[skoal]

Thanks for you reply.

When i utilize BSR100 stat data query. this dont create graphs for SNR, only created graphs for CM online for Upstream and Downstream port, besides, the graphs for down port don take data, is empty the graphs, without data. (For Upstream port the CM online work good! )
Dont forget that i need graphing SNR in every Upstream Port.
Thanks a lot for u help.

You need to select the aprox. graph type.
like this...

[oscar.sanabria]

Ok......perefect ...now working......the problem is for CM ONLINE in down ports.


Now i have created grpahs for:

BSR64K:
CM online for upstream port OK
CM online for down port NOT HAVE DATA
SNR per upstr port OK

BSR1K:
CM online for upstream port NOT HAVE DATA
CM online for down port NOT HAVE DATA
SNR per upstr port OK


Thanks a lot.

This is my log in my BSR1k,

04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[977] SNMP: v2: 200.6.175.2, dsname: Online, oid: .1.3.6.1.4.1.4981.2.1.2.1.7.7, output: U
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[977] WARNING: Result from SNMP not valid. Partial Result: No Such Object avail
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[977] SNMP: v2: 200.6.175.2, dsname: Offline, oid: .1.3.6.1.4.1.4981.2.1.2.1.9.7, output: U
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[977] WARNING: Result from SNMP not valid. Partial Result: No Such Object avail
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[976] SNMP: v2: 200.6.175.2, dsname: Online, oid: .1.3.6.1.4.1.4981.2.1.2.1.7.6, output: U
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[976] WARNING: Result from SNMP not valid. Partial Result: No Such Object avail
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[976] SNMP: v2: 200.6.175.2, dsname: Offline, oid: .1.3.6.1.4.1.4981.2.1.2.1.9.6, output: U
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[976] WARNING: Result from SNMP not valid. Partial Result: No Such Object avail
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[975] SNMP: v2: 200.6.175.2, dsname: Online, oid: .1.3.6.1.4.1.4981.2.1.2.1.7.5, output: U
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[975] WARNING: Result from SNMP not valid. Partial Result: No Such Object avail
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[975] SNMP: v2: 200.6.175.2, dsname: Offline, oid: .1.3.6.1.4.1.4981.2.1.2.1.9.5, output: U
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[975] WARNING: Result from SNMP not valid. Partial Result: No Such Object avail
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[972] SNMP: v2: 200.6.175.2, dsname: Online, oid: .1.3.6.1.4.1.4981.2.1.2.1.7.2, output: U
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[972] WARNING: Result from SNMP not valid. Partial Result: No Such Object avail
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[972] SNMP: v2: 200.6.175.2, dsname: Offline, oid: .1.3.6.1.4.1.4981.2.1.2.1.9.2, output: U
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[972] WARNING: Result from SNMP not valid. Partial Result: No Such Object avail
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[973] SNMP: v2: 200.6.175.2, dsname: Online, oid: .1.3.6.1.4.1.4981.2.1.2.1.7.3, output: U
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[973] WARNING: Result from SNMP not valid. Partial Result: No Such Object avail
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[973] SNMP: v2: 200.6.175.2, dsname: Offline, oid: .1.3.6.1.4.1.4981.2.1.2.1.9.3, output: U
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[973] WARNING: Result from SNMP not valid. Partial Result: No Such Object avail
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[974] SNMP: v2: 200.6.175.2, dsname: Online, oid: .1.3.6.1.4.1.4981.2.1.2.1.7.4, output: U
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[974] WARNING: Result from SNMP not valid. Partial Result: No Such Object avail
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[974] SNMP: v2: 200.6.175.2, dsname: Offline, oid: .1.3.6.1.4.1.4981.2.1.2.1.9.4, output: U
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[974] WARNING: Result from SNMP not valid. Partial Result: No Such Object avail
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[971] SNMP: v2: 200.6.175.2, dsname: Online, oid: .1.3.6.1.4.1.4981.2.1.2.1.7.1, output: U
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[971] WARNING: Result from SNMP not valid. Partial Result: No Such Object avail
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[971] SNMP: v2: 200.6.175.2, dsname: Offline, oid: .1.3.6.1.4.1.4981.2.1.2.1.9.1, output: U
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[971] WARNING: Result from SNMP not valid. Partial Result: No Such Object avail
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[405] SNMP: v2: 200.6.175.2, dsname: traffic_out, oid: .1.3.6.1.2.1.2.2.1.16.2, output: 2242985088
04/19/2006 12:50:19 PM - CMDPHP: Poller[0] Host[14] DS[410] SNMP: v2: 200.6.175.2, dsname: traffic_in, oid: .1.3.6.1.2.1.2.2.1.10.7, output: 3676631435
04/19/2006 12:50:18 PM - CMDPHP: Poller[0] Host[14] DS[410] SNMP: v2: 200.6.175.2, dsname: traffic_out, oid: .1.3.6.1.2.1.2.2.1.16.7, output: 0
04/19/2006 12:50:18 PM - CMDPHP: Poller[0] Host[14] DS[409] SNMP: v2: 200.6.175.2, dsname: traffic_in, oid: .1.3.6.1.2.1.2.2.1.10.6, output: 2200598378
04/19/2006 12:50:18 PM - CMDPHP: Poller[0] Host[14] DS[409] SNMP: v2: 200.6.175.2, dsname: traffic_out, oid: .1.3.6.1.2.1.2.2.1.16.6, output: 0
04/19/2006 12:50:18 PM - CMDPHP: Poller[0] Host[14] DS[408] SNMP: v2: 200.6.175.2, dsname: traffic_in, oid: .1.3.6.1.2.1.2.2.1.10.5, output: 2478671701
04/19/2006 12:50:18 PM - CMDPHP: Poller[0] Host[14] DS[408] SNMP: v2: 200.6.175.2, dsname: traffic_out, oid: .1.3.6.1.2.1.2.2.1.16.5, output: 0
04/19/2006 12:50:18 PM - CMDPHP: Poller[0] Host[14] DS[407] SNMP: v2: 200.6.175.2, dsname: traffic_in, oid: .1.3.6.1.2.1.2.2.1.10.4, output: 772144971
04/19/2006 12:50:18 PM - CMDPHP: Poller[0] Host[14] DS[407] SNMP: v2: 200.6.175.2, dsname: traffic_out, oid: .1.3.6.1.2.1.2.2.1.16.4, output: 0
04/19/2006 12:50:18 PM - CMDPHP: Poller[0] Host[14] DS[406] SNMP: v2: 200.6.175.2, dsname: traffic_in, oid: .1.3.6.1.2.1.2.2.1.10.3, output: 0
04/19/2006 12:50:18 PM - CMDPHP: Poller[0] Host[14] DS[406] SNMP: v2: 200.6.175.2, dsname: traffic_out, oid: .1.3.6.1.2.1.2.2.1.16.3, output: 3512776278
04/19/2006 12:50:18 PM - CMDPHP: Poller[0] Host[14] DS[405] SNMP: v2: 200.6.175.2, dsname: traffic_in, oid: .1.3.6.1.2.1.2.2.1.10.2, output: 1902807470
04/19/2006 12:50:18 PM - CMDPHP: Poller[0] Host[14] DS[404] SNMP: v2: 200.6.175.2, dsname: traffic_in, oid: .1.3.6.1.2.1.2.2.1.10.1, output: 3527424637
04/19/2006 12:50:18 PM - CMDPHP: Poller[0] Host[14] DS[404] SNMP: v2: 200.6.175.2, dsname: traffic_out, oid: .1.3.6.1.2.1.2.2.1.16.1, output: 1583368898

[gmalla]

See this URL for CMTS Router Monitoring.

http://demo.cmtsmanager.com/

user name :cmts
password :cmts

for the demo on CMTS Router monitoring. It has google map integration, excel reports , thresholds to set for SNR, Offline modems , Rx Utilization, Tx Utilization etc.

Thanks
Gmalla

[xfrags]

can someone share it's bsr 64000 templates/scripts

thanks in advance

[aldo]

Try modifying the docsis template / script I created.

Hi

Do you have any template for Motorola BSR 64000 witch shows SNR (and other features) for each Upstream modules.

Aldo