I get this in error.log from apache when trying to setup SNMP interfaces:
No community name specified.
USAGE: snmpwalk [OPTIONS] AGENT [OID]
Version: 5.0.8
Web: http://www.net-snmp.org/
Email: net-snmp-coders@lists.sourceforge.net
OPTIONS:
-h, --help display this help message
-H display configuration file directives understood
-v 1|2c|3 specifies SNMP version to use
-V, --version display package version number
SNMP Version 1 or 2c specific
-c COMMUNITY set the community string
SNMP Version 3 specific
-a PROTOCOL set authentication protocol (MD5|SHA)
-A PASSPHRASE set authentication protocol pass phrase
-e ENGINE-ID set security engine ID (e.g. 800000020109840301)
-E ENGINE-ID set context engine ID (e.g. 800000020109840301)
-l LEVEL set security level (noAuthNoPriv|authNoPriv|authPriv)
-n CONTEXT set context name (e.g. bridge1)
-u USER-NAME set security name (e.g. bert)
-x PROTOCOL set privacy protocol (DES|AES)
-X PASSPHRASE set privacy protocol pass phrase
-Z BOOTS,TIME set destination engine boots/time
General communication options
-r RETRIES set the number of retries
-t TIMEOUT set the request timeout (in seconds)
Debugging
-d dump input/output packets in hexadecimal
-D TOKEN[,...] turn on debugging output for the specified TOKENs
(ALL gives extremely verbose debugging output)
General options
-m MIB[:...] load given list of MIBs (ALL loads everything)
-M DIR[:...] look in given list of directories for MIBs
-P MIBOPTS Toggle various defaults controlling MIB parsing:
u: allow the use of underlines in MIB symbols
c: disallow the use of "--" to terminate comments
d: save the DESCRIPTIONs of the MIB objects
e: disable errors when MIB symbols conflict
w: enable warnings when MIB symbols conflict
W: enable detailed warnings when MIB symbols conflict
R: replace MIB symbols from latest module
-O OUTOPTS Toggle various defaults controlling output display:
a: print all strings in ascii format
b: do not break OID indexes down
e: print enums numerically
E: escape quotes in string indices
f: print full OIDs on output
n: print OIDs numerically
q: quick print for easier parsing
Q: quick print with equal-signs
s: print only last symbolic element of OID
S: print MIB module-id plus last element
t: print timeticks unparsed as numeric integers
T: print human-readable text along with hex strings
u: print OIDs using UCD-style prefix suppression
U: don't print units
v: print values only (not OID = value)
x: print all strings in hex format
X: extended index format
-I INOPTS Toggle various defaults controlling input parsing:
b: do best/regex matching to find a MIB node
r: do not check values for range/type legality
R: do random access to OID labels
h: don't apply DISPLAY-HINTs
u: top-level OIDs must have '.' prefix (UCD-style)
-C APPOPTS Set various application specific behaviours:
p: print the number of variables found
i: include given OID in the search range
c: do not check returned OIDs are increasing
but it DOES have a community name defined.
SNMP
Moderators: Developers, Moderators
-
- Posts: 33
- Joined: Fri Jan 10, 2003 3:16 am
- Location: Antwerpen (Belgium)
- Contact:
Hi Guest,
Did you specify in the Cacti settings that you are using a 5.x version of NET-SNMP ?? There is a difference in syntax 4.x <-> 5.x
I don't have the GUI with me now, but there is that drop-down box where you select either version.
It's where you can configure also you paths to the various applications (like rrdtool,php etc)
Regards,
Jan
Did you specify in the Cacti settings that you are using a 5.x version of NET-SNMP ?? There is a difference in syntax 4.x <-> 5.x
I don't have the GUI with me now, but there is that drop-down box where you select either version.
It's where you can configure also you paths to the various applications (like rrdtool,php etc)
Regards,
Jan
"Never Trust A Computer You Can't Throw Out A Window" - Steve Wozniak
Who is online
Users browsing this forum: No registered users and 1 guest