Packet Shaper Template

noremlas · Post by **noremlas** » Tue Apr 04, 2006 1:39 am

Hi all,

I have created a simple template to graff traffic at inbound (1) & outbound (2) classes of a Packet Shaper host (Packeteer).

Please provide feedback if is useful.

Regards.

chewbacca156 · Post by **chewbacca156** » Tue Apr 04, 2006 7:22 am

Hi,

Thanks for your script but, how do you install it ?

I did "import template" and choose my xml file. Everything succeeded.

On my packetshaper device, I choose "class_packetchaper_dataquery" in the list and "add".
But nothing is found : Success [0 Items, 0 Rows]

Is there another thing to do ?

chewbacca156 · Post by **chewbacca156** » Wed Apr 12, 2006 11:27 am

Does anyone have a template to graph the traffic class of a PacketShaper ?
ex:
traffic of class web/http
traffic of class web/https
traffic of class web/ftp
etc...

Eric94 · Post by **Eric94** » Thu Apr 20, 2006 4:54 pm

Hi,

Your template calls Classes.XML

Can you please put this file or indicate where I can find it ?

Thank you

noremlas · Post by **noremlas** » Mon Apr 24, 2006 2:37 am

Sorry about missed info, here all xml templates needed. Thanks for feedback.

anuraganuj · Post by **anuraganuj** » Wed Apr 26, 2006 12:51 am

Please try these templates which have some other infiormation also.

noremlas · Post by **noremlas** » Wed Apr 26, 2006 7:20 am

Thanks for new templates, but i only needed to graph current rate traffic and peak of classes, if someone needs also to graph partition guaranteed rate and partition burst, only need to add oid values at classes.xml file and update datatemplate and graphtemplate with new values.

noremlas · Post by **noremlas** » Thu Apr 27, 2006 2:55 am

This is a graph example of talked above

Regards

fmangeant · Post by **fmangeant** » Thu Apr 27, 2006 7:41 am

Hi

I get some "unmet dependancies" when trying to import these templates...

Could you post them again please ?

Thanks in advance.

noremlas · Post by **noremlas** » Fri Apr 28, 2006 2:04 am

anuraganuj · Post by **anuraganuj** » Fri Apr 28, 2006 4:53 am

Hi fmangeant
i had tried to create it again but i m not able to figure out why is it giving depending error but u shud be able to import everything.Then u can try to
repair it.It is working fine very well here.

stevie42000 · Post by **stevie42000** » Thu Jul 06, 2006 5:20 am

Hi I get the error that the classes.xml is not found I load it but it does not come in the dir? Can someone help me please??

stevie42000 · Post by **stevie42000** » Thu Jul 06, 2006 5:24 am

I just pointed cacti to a other dir where I added classes.xml that works out not the right way but it works now.

ursanbogdan · Post by **ursanbogdan** » Tue Sep 12, 2006 3:52 pm

Hy i apreciate your work because i was scared to startit on my own.

My setup ip quite simple. Linux router, 4 interfaces, 1 wifi,
2 external connections
3 internal

I want to graph form classes IN/OUT/BURST for EACH

and i mean EACH client. I used HotSanic before the trubble with that it was that over 200 hosts it took to much procesor power and not even 1/5 of the graphs were ever viewd. Excuse my gramar but it's only 00:00 and my beauty sleep has been ruined.

If there is anything (data/scripts/etc) that i wil make i will provide them 4 u all.

zgamer · Post by **zgamer** » Thu Nov 30, 2006 9:13 am

Is there a way to get it so it doesn't crop the names when it does the "|query_classFullName|" as it works when doing the initial query.

Cacti