CMTS stats

[skoal]

Hi
Here are 2 cmts templates . for Arris C3,and Motorola BSR 1000.

[skoal]

Arris C3

[skoal]

BSR1000

[oscar.sanabria]

I had used that scripts but this dont created graphs for SNR; neither created CM online for Down port, in few words, this script only cretaed graphs for CM online per Upstream Ports.
I need Create graphs for CM online in DOWN ports and SNR in every Upstream Ports, anybody can help me ?

I have two CMTS, BSR1000 and BSR64000, in BSR64000 work good only CM Online per Upstream i dont have data for the graphs created for CM online per down port, neither have any graph created for SNR, in change for BSR1000 was created graphs for CM online in Upstream and Down port but NOT HAVE ANY DATA IN THOSE, neither have graph created for SNR in Upstream Port.

Help me please.

[zeroy]

Arris C3

Skoal, I am tryingto get the modem count/sr working on my C3 but what should I put in the field:

- Input Type
- Input Value
- Output type ID?

Thanks,

[oscar.sanabria]

My issue in BSR1000 CM Online was originated for firmware version into CMTS, when i upgrade that, my graphs run to work.

Thanks.

[rallen]

I hate to dig up old threads, but is anyone using the template for the BSR 1000? I loaded it on my installation of Cacti and while I was able to get the upstream graphs working properly the modem count graphs are all showing nan.

[oscar.sanabria]

I hate to dig up old threads, but is anyone using the template for the BSR 1000? I loaded it on my installation of Cacti and while I was able to get the upstream graphs working properly the modem count graphs are all showing nan.

What is your CMTS and what is its firmware version ?

[rallen]

BSR 1000R(tm) version 2.0.1.04P01.PRRU

[oscar.sanabria]

BSR 1000R(tm) version 2.0.1.04P01.PRRU

i have had the same problem before when i had your version, after i upgraded to version 2.0.1.08P02.PRRU and this templates now working very good.

Anyway verify that running smpwalk with OID for this templates report good results.

[macdaddy]

Does anyone have this working? I'm stuck at the same point as zeroy with the Index Type, Index Value & Output Type ID. I'm not even sure what they're referring to here.

Thanks
J

[roygrubb]

If anyone's interested, I've added active/unregistered modems into my graphs and changed online to registered as it would say if you were consoled into the BSR. I have this working on a BSR 64000 by the way.

email me at roy.grubb@conwaycorp.com

[roygrubb]

Also, I seen there were a few that were having issues with SNRs. once again I'm willing to help

[apmav]

Anyone has a template for the C4 CMTS? I have the 2 index problem and cannot graph the modem count

Many thanks

Andreas

[m4ster]

Hi, i try to use this template for modem count per upstream, but appear this error, can somebody help?

RRDTool Command:

/usr/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="CMTS TGU - |query_ifName| Modems" \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--y-grid=db \
--units-exponent=1 \
--vertical-label="Modems per upstream" \
--slope-mode \
--font TITLE:12: \
--font AXIS:8: \
--font LEGEND:10: \
--font UNIT:8: \
DEF:a="/var/lib/cacti/rra/10_1_8_48_offline_62.rrd":Online:AVERAGE \
DEF:b="/var/lib/cacti/rra/10_1_8_48_offline_62.rrd":Offline:AVERAGE \
LINE2:a#00FF00FF:"Online" \
GPRINTLAST:" Current\:%8.0lf" \
GPRINTMIN:"Min\:%8.0lf" \
GPRINTMAX:"Max\:%8.0lf" \
GPRINTAVERAGE:"Averange\:%8.0lf\n" \
LINE2:b#FF0000FF:"Offline" \
GPRINTLAST:"Current\:%8.0lf" \
GPRINTMIN:"Min\:%8.0lf" \
GPRINTMAX:"Max\:%8.0lf" \
GPRINTAVERAGE:"Averange\:%8.0lf\n"
RRDTool Says:

ERROR: invalid y-grid format