Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Post support questions that directly relate to Linux/Unix operating systems.
Moderators: Developers , Moderators
Pumpi
Cacti User
Posts: 259 Joined: Wed Jan 14, 2004 3:23 amLocation: Germany
Post
by Pumpi Mon Feb 20, 2006 5:12 am
Hello,
I'm using Suse ES 9 with net-snmp version 5.1.3.1
When i try to use snmpwalk -v 2c -c blbla xxx.xxx.xxx.xxx:260
(udp port 260 for Checkpoint SNMP daemon) I get follwing error:
"Timeout: no response from xxx.xxx.xxx.xxx"
No packets are seen in the firewall log. Traffic is allowed and no problem to get the SNMP datas from normal standard udp port 161.
Any ideas
Pumpi
philuxe
Posts: 24 Joined: Fri Jan 07, 2005 6:15 am
Post
by philuxe Mon Feb 20, 2006 9:48 am
Option has been removed from what I know, I have had the same issue here. You can try to NAT incoming 161UDP request to 260UDP
Pumpi
Cacti User
Posts: 259 Joined: Wed Jan 14, 2004 3:23 amLocation: Germany
Post
by Pumpi Tue Feb 21, 2006 5:40 am
philuxe,
I can't believe that this option was disabled in the newer net-snmp versions.
From a old net-snmp unix host I can use snmpwalk with the -p port command
bryancromwell
Posts: 15 Joined: Tue Sep 21, 2004 8:13 pm
Post
by bryancromwell Sun Apr 15, 2007 2:14 pm
This is a old post but for search purposes, if you add the following line to the /etc/snmpd.conf you can poll the Checkpoint Daemon from port 161. I just tested it with Rhel3 + CP ver R62
Users browsing this forum: No registered users and 0 guests
