Graphs not displying properly

Freshwreckage · Post by **Freshwreckage** » Fri Feb 03, 2006 1:52 pm

Hello all

And a major thanks to all who helped me with my earlier setup issues.

I am having a minor issue where, when I log into Cacti, and go to the graph's page, I get no graph(see attachment for sample) just a hyperlink that drills down into the 4 graphs, which display just fine. But I would like to set the page up so that when I go to graphs, my graphs actually show up.

What am I doing wrong?

Thank you.

JP

BSOD2600 · Post by **BSOD2600** » Fri Feb 03, 2006 2:10 pm

What rrdtool version and build are you using?

Freshwreckage · Post by **Freshwreckage** » Fri Feb 03, 2006 2:20 pm

Please be kind when I say this as I am usualy not so with my users...
Heh.

I don't know.

I do however know this much, I am not using 1.26.

I know this because I opened the zip of RRDtools and compared the file sizes. 1.26 has a file size of 724KB whereas the one I am using has a filesize of 560KB

Is there another way to tell the version?

Freshwreckage · Post by **Freshwreckage** » Fri Feb 03, 2006 2:27 pm

I got it!
I had the RRDTool set to the wrong seeting in the config.

Thanks for the help.
Believe it or not, the fact that you asked me about the RRDtool sent me in the right direction.

Thanks much!

Post by **TheWitness** » Sat Feb 04, 2006 7:32 am

Hmm,

Hey, we are neighbors. I'm from "Earth" too.

TheWitness

Freshwreckage · Post by **Freshwreckage** » Sat Feb 04, 2006 9:09 am

Heh...

I am still having 1 minor anomally.
When I try to look at my graphs in tree mode, I get a blank screen. Even though I have created 3 "branches".

This make any sense?

Awsome software by the way!!!

JP

Post by **TheWitness** » Sat Feb 04, 2006 2:31 pm

What is in the branches. Keep testing and you should get it.

TheWitness

snoop86 · Post by **snoop86** » Sat Feb 11, 2006 8:33 pm

Freshwreckage wrote:I got it!
I had the RRDTool set to the wrong seeting in the config.

Thanks for the help.
Believe it or not, the fact that you asked me about the RRDtool sent me in the right direction.

Thanks much!

hi
i think i have the same problem too...

can you help me, what exactly did you do so that it works now.
thanks!

BSOD2600 · Post by **BSOD2600** » Sun Feb 12, 2006 11:51 am

Read this http://forums.cacti.net/viewtopic.php?t=11747 and post again.

snoop86 · Post by **snoop86** » Sun Feb 12, 2006 3:43 pm

BSOD2600 wrote:Read this http://forums.cacti.net/viewtopic.php?t=11747 and post again.

thank you for your help.
i have read it now and i think it works, now i can see the graphs but every time the scheduled task (->pollar.php each 5 min) is running i get an error.
i have made a screenshot, so you can see what i mean!

thx!

BSOD2600 · Post by **BSOD2600** » Sun Feb 12, 2006 5:49 pm

Those MIB errors are because you didn't properly set the MIBDIRS system variable. Re-read the install guide on how to do that. They really dont matter though since cacti doesnt use MIB files...

Graphs not displying properly

Graphs not displying properly

Who is online