New to cacti but have a question?

[rdhall]

When I try to run anything from the F5 template I downloaded I get the following errors in debug mode.

RRDTool Command:

/usr/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="IRVBIP02 - Proxy Traffic - XX.XX.XX.XX:443" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="bits per second" \
DEF:a="/var/www/html/cacti/rra/irvbip02_proxy_traffic_in_1284.rrd":proxy_traffic_in:AVERAGE \
DEF:b="/var/www/html/cacti/rra/irvbip02_proxy_traffic_in_1284.rrd":proxy_traffic_in:MAX \
DEF:c="/var/www/html/cacti/rra/irvbip02_proxy_traffic_in_1284.rrd":proxy_traffic_out:AVERAGE \
DEF:d="/var/www/html/cacti/rra/irvbip02_proxy_traffic_in_1284.rrd":proxy_traffic_out:MAX \
AREA:a#00CF00:"Inbound" \
GPRINTLAST:" Current\:%8.2lf %s" \
GPRINTAVERAGE:"Average\:%8.2lf %s\n" \
LINE1:b#00694A:"Inbound (Peak)\:" \
GPRINTMAX:" %8.2lf %s\n" \
LINE1:c#EAAF00:"Outbound" \
GPRINT:c:LAST:"Current\:%8.2lf %s" \
GPRINT:c:AVERAGE:"Average\:%8.2lf %s\n" \
LINE1:d#FF0000:"Outbound (Peak)\:" \
GPRINT:d:MAX:"%8.2lf %s" \
COMMENT:""
RRDTool Says:

ERROR: opening '/var/www/html/cacti/rra/irvbip02_proxy_traffic_in_1284.rrd': No such file or directory


I have other devices that are graphing correctly just cant seem to get this one

[BSOD2600]

Turn the polling level in cacti to debug (Settings | Polling level) for one cycle and paste the output of the actual log file (./cacti/log/cacti.log). If it contains WEBLOG entries, then don't bother posting since they just clutter up the log. Turn off WEBEVENTS logging and try again.

Look for warning or error messages regarding your IRVBIP02 host.

[gandalf]

Did you wait at least for one polling cycle? The rrd file is generated during the polling process!
If you did, please check permissions for rra/
Reinhard

[rdhall]

01/25/2006 01:15:13 PM - CMDPHP: Poller[0] Host[9] PING: default
01/25/2006 01:15:13 PM - CMDPHP: Poller[0] Host[9] SNMP: SNMP not performed due to setting or ping result.
01/25/2006 01:15:13 PM - CMDPHP: Poller[0] DEBUG: SQL Exec: "update host set status = '1', status_event_count = '35', status_fail_date = '0000-00-00 00:00:00', status_rec_date = '0000-00-00 00:00:00', status_last_error = 'SNMP not performed due to setting or ping result., default', min_time = '9.99999', max_time = '0.00000', cur_time = '0.00000', avg_time = '0.00000', total_polls = '36', failed_polls = '36', availability = '0' where hostname = 'XX.XX.XX.XX'"

[gandalf]

This debug log is too short. Please provide more of it; perhaps the whole of one full run as a zipped attachment
Reinhard