No graphs being made

[adamuk]

Hi all, not sure what is going on.
I have added a device ( cisco router ), and selected to graph traffic on on port. Everything goes ok but all I get in the graph page is the title and no png file is created. Any clues as to where I should be looking .

Cheers

[gandalf]

Click on this graph to display all 4 timespan graphs. Select the wrench next to the upper graph. Copy the rrdtool graph statements to commnd line and run them. Look out for error messages. Please post your findings
Reinhard

[adamuk]

Hi, I cant see any errors in this

/usr/local/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="Fred ( Core Router Telehouse East ) - Traffic" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="bits per second" \
DEF:a="/usr/local/share/cacti/rra/fred_core_router_telehouse_east__traffic_in_38.rrd":traffic_in:AVERAGE \
DEF:b="/usr/local/share/cacti/rra/fred_core_router_telehouse_east__traffic_in_38.rrd":traffic_out:AVERAGE \
CDEF:cdefa=a,8,* \
CDEF:cdeff=b,8,* \
AREA:cdefa#00CF00:"Inbound" \
GPRINT:cdefa:LAST:" Current\:%8.2lf %s" \
GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s" \
COMMENT:"Total In: 0 bytes\n" \
LINE1:cdeff#002A97:"Outbound" \
GPRINT:cdeff:LAST:"Current\:%8.2lf %s" \
GPRINT:cdeff:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdeff:MAX:"Maximum\:%8.2lf %s" \
COMMENT:"Total Out: 0 bytes"

[macdonaldc]

Please check your rights and confirm its not root that is the owner/group associated with your www root folder. That was my issue. I also had to change my cron so that it went from root (that was in my documentation) to that (in my case SuSe) wwwrun.

Try that and let me know.

[adamuk]

Checked the owners of cacti dir and all sub dir's and they belong to www, also, the cron job is run as root

[adamuk]

Antoher update, found this in the cacti logs:-
12:04:57 PM - POLLER: Poller[0] Maximum runtime of 296 seconds exceeded. Exiting.

[adamuk]

All fixed guys, it was an incorrect path set to the php executable, thanks for all the advice

[soneedu]

how to set the correct PHP path?
which conf files should i edit?

[TheWitness]

From shell:

"whereis php"

From Cacti

Settings->Paths

TheWitness