Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Ok first off the program rocks. But i have two problems with it. Both have to do with the graph.
Down at the bottom of the graph when it shows the From and To date of when it started polling it to the last time the graph was polled....well the dates and time are both indetical. Leaving no time gap between them. What controls this and where can i fix it. I wish to be able to figure out the time it started being polled to the last time it was polled. So instead of it saying
From March 10 2006 11:30:00AM to March 10 2006 11:30:00AM
I would like it to say
From January 10 2006 11:30:00AM to March 10 2006 11:30:00AM
The second problem that I am having is the query_if Statments. Now by logic if there is nothing to display nothing should show up. I am using |query_ifAlias| and if there is no Alias it displays. Same with |query_ifIP|
So if there is nothing to display how do i make it not display. On all my graphs (4000 of them) the ones that need to show nothing show them. And i wish not to edit all 200 that are having the problem.
Second problem is with the |query_ifAlias| when there is something to display it cuts it off at a certain amount of characters....how to i make it extend further. It would be nice because some desciptions are longer.
spignataro wrote:Ok first off the program rocks. But i have two problems with it. Both have to do with the graph.
Thanks!
spignataro wrote:Down at the bottom of the graph when it shows the From and To date of when it started polling it to the last time the graph was polled....well the dates and time are both indetical. Leaving no time gap between them. What controls this and where can i fix it. I wish to be able to figure out the time it started being polled to the last time it was polled. So instead of it saying
From March 10 2006 11:30:00AM to March 10 2006 11:30:00AM
I would like it to say
From January 10 2006 11:30:00AM to March 10 2006 11:30:00AM
This isn't the poller interval, but the interval selected on the graph page.
spignataro wrote:The second problem that I am having is the query_if Statments. Now by logic if there is nothing to display nothing should show up. I am using |query_ifAlias| and if there is no Alias it displays. Same with |query_ifIP|
So if there is nothing to display how do i make it not display. On all my graphs (4000 of them) the ones that need to show nothing show them. And i wish not to edit all 200 that are having the problem.
You have to adjust the data query's suggested graph titles. The first one that matches all the variables is used.
spignataro wrote:Second problem is with the |query_ifAlias| when there is something to display it cuts it off at a certain amount of characters....how to i make it extend further. It would be nice because some desciptions are longer.
Settings->Visual->Graph Management->Maximum Title Length
[size=117][i][b]Tony Roman[/b][/i][/size]
[size=84][i]Experience is what causes a person to make new mistakes instead of old ones.[/i][/size]
[size=84][i]There are only 3 way to complete a project: Good, Fast or Cheap, pick two.[/i][/size]
[size=84][i]With age comes wisdom, what you choose to do with it determines whether or not you are wise.[/i][/size]
spignataro wrote:Ok first off the program rocks. But i have two problems with it. Both have to do with the graph.
Thanks!
Welcome...it is a great product
spignataro wrote:Down at the bottom of the graph when it shows the From and To date of when it started polling it to the last time the graph was polled....well the dates and time are both indetical. Leaving no time gap between them. What controls this and where can i fix it. I wish to be able to figure out the time it started being polled to the last time it was polled. So instead of it saying
From March 10 2006 11:30:00AM to March 10 2006 11:30:00AM
I would like it to say
From January 10 2006 11:30:00AM to March 10 2006 11:30:00AM
This isn't the poller interval, but the interval selected on the graph page.
Figure out what was going on. It now works. Something really dumb with the dates.
spignataro wrote:The second problem that I am having is the query_if Statments. Now by logic if there is nothing to display nothing should show up. I am using |query_ifAlias| and if there is no Alias it displays. Same with |query_ifIP|
So if there is nothing to display how do i make it not display. On all my graphs (4000 of them) the ones that need to show nothing show them. And i wish not to edit all 200 that are having the problem.
You have to adjust the data query's suggested graph titles. The first one that matches all the variables is used.
Now where would this be?
spignataro wrote:Second problem is with the |query_ifAlias| when there is something to display it cuts it off at a certain amount of characters....how to i make it extend further. It would be nice because some desciptions are longer.
Settings->Visual->Graph Management->Maximum Title Length
[size=117][i][b]Tony Roman[/b][/i][/size]
[size=84][i]Experience is what causes a person to make new mistakes instead of old ones.[/i][/size]
[size=84][i]There are only 3 way to complete a project: Good, Fast or Cheap, pick two.[/i][/size]
[size=84][i]With age comes wisdom, what you choose to do with it determines whether or not you are wise.[/i][/size]
