Help with graphing

fiacchino · Post by **fiacchino** » Fri Nov 11, 2005 6:46 pm

When I go to my grach they do not load they are just the x and no picture can someone help?

Post by **rony** » Fri Nov 11, 2005 8:25 pm

Have you made sure that the poller has run at least 1 time?

BSOD2600 · Post by **BSOD2600** » Sat Nov 12, 2005 1:20 am

Possibly you forgot to apply the security on cmd.exe too. I'd also suggest you read the guide in my signature.

fiacchino · Post by **fiacchino** » Sat Nov 12, 2005 11:09 am

how do I give cmd.exe the security rights it needs?

fiacchino · Post by **fiacchino** » Sat Nov 12, 2005 12:00 pm

When I run
C:\php>php c:\Inetpub\wwwroot\cacti\\poller.php

I get this

Cannot find module (IP-MIB): At line 0 in (none)
Cannot find module (IF-MIB): At line 0 in (none)
Cannot find module (TCP-MIB): At line 0 in (none)
Cannot find module (UDP-MIB): At line 0 in (none)
Cannot find module (SNMPv2-MIB): At line 0 in (none)
Cannot find module (SNMPv2-SMI): At line 0 in (none)
Cannot find module (UCD-SNMP-MIB): At line 0 in (none)
Cannot find module (UCD-DEMO-MIB): At line 0 in (none)
Cannot find module (SNMP-TARGET-MIB): At line 0 in (none)
Cannot find module (SNMP-VIEW-BASED-ACM-MIB): At line 0 in (none
Cannot find module (SNMP-COMMUNITY-MIB): At line 0 in (none)
Cannot find module (UCD-DLMOD-MIB): At line 0 in (none)
Cannot find module (SNMP-FRAMEWORK-MIB): At line 0 in (none)
Cannot find module (SNMP-MPD-MIB): At line 0 in (none)
Cannot find module (SNMP-USER-BASED-SM-MIB): At line 0 in (none)
Cannot find module (SNMP-NOTIFICATION-MIB): At line 0 in (none)
Cannot find module (SNMPv2-TM): At line 0 in (none)
Could not open input file: c:\Inetpub\wwwroot\cacti\poller.php.

can someone please help me?>

BSOD2600 · Post by **BSOD2600** » Sat Nov 12, 2005 2:31 pm

Once again, I strongly suggest you read the guide in my signature. It addresses the problems you're having.

fiacchino · Post by **fiacchino** » Sat Nov 12, 2005 8:58 pm

I did follow it I didn't see anything about my problem in it is there something im missing?

BSOD2600 · Post by **BSOD2600** » Sun Nov 13, 2005 7:22 pm

Yes, several things

1) You didnt specify the proper path for the MIBSDIR system variable.
2) You didnt apply the proper security settings outlined in the guide to your cacti directory nor cmd.exe.

fiacchino · Post by **fiacchino** » Sun Nov 13, 2005 9:10 pm

where can I find your guide then I must be looking at the wrong thing I can't find anything about the security settings or MIBSDIR.

Can you please tell me where I can find your guide?

Thanks for your help!

BSOD2600 · Post by **BSOD2600** » Mon Nov 14, 2005 1:53 am

fiacchino wrote:Can you please tell me where I can find your guide?

BSOD2600 wrote:I'd also suggest you read the guide in my signature.

fiacchino · Post by **fiacchino** » Mon Nov 14, 2005 10:39 am

Now I am getting

RRDTool Says:

The system cannot find the path specified.

I followed your doc and its still giviong me problems

fiacchino · Post by **fiacchino** » Mon Nov 14, 2005 12:38 pm

No when I look in my Log I see

CMDPHP: Poller[0] Host[6] DS[15] WARNING: Result from SNMP not valid. Partial Result:

and
POLLER: Poller[0] Maximum runtime of 296 seconds exceeded. Exiting.

and
11/14/2005 11:36:09 AM - CMDPHP: Poller[0] ERROR: There are no RRA's assigned to local_data_id: 16.

fiacchino · Post by **fiacchino** » Mon Nov 14, 2005 1:42 pm

When I run

C:\apache2\htdocs\cacti>php poller.php

I get

Cannot find module (IP-MIB): At line 0 in (none)
Cannot find module (IF-MIB): At line 0 in (none)
Cannot find module (TCP-MIB): At line 0 in (none)
Cannot find module (UDP-MIB): At line 0 in (none)
Cannot find module (SNMPv2-MIB): At line 0 in (none)
Cannot find module (SNMPv2-SMI): At line 0 in (none)
Cannot find module (UCD-SNMP-MIB): At line 0 in (none)
Cannot find module (UCD-DEMO-MIB): At line 0 in (none)
Cannot find module (SNMP-TARGET-MIB): At line 0 in (none)
Cannot find module (SNMP-VIEW-BASED-ACM-MIB): At line 0 in (none)
Cannot find module (SNMP-COMMUNITY-MIB): At line 0 in (none)
Cannot find module (UCD-DLMOD-MIB): At line 0 in (none)
Cannot find module (SNMP-FRAMEWORK-MIB): At line 0 in (none)
Cannot find module (SNMP-MPD-MIB): At line 0 in (none)
Cannot find module (SNMP-USER-BASED-SM-MIB): At line 0 in (none)
Cannot find module (SNMP-NOTIFICATION-MIB): At line 0 in (none)
Cannot find module (SNMPv2-TM): At line 0 in (none)
The system cannot find the path specified.
11/14/2005 12:39:03 PM - SYSTEM STATS: Time:2.2018 Method:cmd.php Processes:1 Th
reads:N/A Hosts:2 HostsPerProcess:2 DataSources:7 RRDsProcessed:4

Any ideas i followed the windows install doc all the way rights are all there i dont know what else to do.

I dont get graphs
There is nothing in my /rra folder but .placeholders I tryed the rrdtool from cacti.net and still nothing.

BSOD2600 · Post by **BSOD2600** » Mon Nov 14, 2005 2:35 pm

1) the MIB errors are cause from you not properly specifying the correct path the the MIB files which live in your php directory. Once again, reread the set up guide. From the command prompt, type: set and paste the output.

2) The lack of rra files could mean you're not collecting any valid data or you have a permission problem which is preventing them from being created. Turn the logging level in cacti to debug for one cycle and manually run: php <cacti path>/poller.php. Paste the output.

fiacchino · Post by **fiacchino** » Mon Nov 14, 2005 3:25 pm

I got it to work thank you for your help.

C:\rrdtool was misspelled that was the whole problem
-LOL-

Cacti

Help with graphing

Help with graphing

Who is online