Graphing past 100%

[leeeroybrown]

Hi,


This graph tops out at 100% so when the gauge exceeds that mark no data gets graphed. How/what do I set so the graph captures upto say 200%. Will that setting only impact this device or is it universal ??


Thank you

[/img]

[gandalf]

Hi,


This graph tops out at 100% so when the gauge exceeds that mark no data gets graphed. How/what do I set so the graph captures upto say 200%. Will that setting only impact this device or is it universal ??


Thank you

[/img]

This depends on the settings of the Graph Template used. Select that Graph Template and have a look at
- Auto Scale Option. If checked, Graph will Autoscale. If unchecked, maximum value as defined later will be used.
- Upper Limit If set with no auto scaling, this value will limit the upper level.

Reinhard

[lrabreu]

Hi,


This graph tops out at 100% so when the gauge exceeds that mark no data gets graphed. How/what do I set so the graph captures upto say 200%. Will that setting only impact this device or is it universal ??


Thank you

[/img]

This depends on the settings of the Graph Template used. Select that Graph Template and have a look at
- Auto Scale Option. If checked, Graph will Autoscale. If unchecked, maximum value as defined later will be used.
- Upper Limit If set with no auto scaling, this value will limit the upper level.

Reinhard

Very good i was same problem, but now not!!