Problem with cactid & load average remote server monitor

Post support questions that directly relate to Linux/Unix operating systems.

Moderators: Developers, Moderators

Post Reply
kanada
Cacti User
Posts: 137
Joined: Sun Aug 28, 2005 12:51 pm

Problem with cactid & load average remote server monitor

Post by kanada »

Hello,

i have problem with monitoring load average on remote linux servers. When i change poller reqests to cactid, rrd dont graph me that stats..

Problem that is on cacti 0.8.6g after update from "f", today updated.
On cmd work fine.. any solutions ?

Thanks
Top
User avatar
rony
Developer/Forum Admin
Posts: 6022
Joined: Mon Nov 17, 2003 6:35 pm
Location: Michigan, USA
Contact:
Contact rony

Post by rony »

How are you changing to cactid?

Also, confirm that your path to cactid in paths is correct.
[size=117][i][b]Tony Roman[/b][/i][/size]
[size=84][i]Experience is what causes a person to make new mistakes instead of old ones.[/i][/size]
[size=84][i]There are only 3 way to complete a project: Good, Fast or Cheap, pick two.[/i][/size]
[size=84][i]With age comes wisdom, what you choose to do with it determines whether or not you are wise.[/i][/size]
Top
kanada
Cacti User
Posts: 137
Joined: Sun Aug 28, 2005 12:51 pm

Post by kanada »

Yes path is good confirmed.. all graphs working.. only load average rrd dont graph.. im using ucd/net protocol..
Top
User avatar
rony
Developer/Forum Admin
Posts: 6022
Joined: Mon Nov 17, 2003 6:35 pm
Location: Michigan, USA
Contact:
Contact rony

Post by rony »

Turn you logging up to Debug level and check out your logs. If you don't see anything that is an issue, post you log here, we will check it out.
[size=117][i][b]Tony Roman[/b][/i][/size]
[size=84][i]Experience is what causes a person to make new mistakes instead of old ones.[/i][/size]
[size=84][i]There are only 3 way to complete a project: Good, Fast or Cheap, pick two.[/i][/size]
[size=84][i]With age comes wisdom, what you choose to do with it determines whether or not you are wise.[/i][/size]
Top
kanada
Cacti User
Posts: 137
Joined: Sun Aug 28, 2005 12:51 pm

Post by kanada »

[...]
10/19/2005 05:10:33 PM - CACTID: Poller[0] Host[9] DS[192] WARNING: Result from SNMP not valid. Partial Result: ...
10/19/2005 05:10:33 PM - CACTID: Poller[0] Host[9] DS[192] SNMP: v2: xxx.xxx.xxx.xxx, dsname: load_1min, oid: .1.3.6.1.4.1.2021.10.1.3.1, value:
U
10/19/2005 05:10:33 PM - CACTID: Poller[0] Host[9] DS[194] WARNING: Result from SNMP not valid. Partial Result: ...
10/19/2005 05:10:33 PM - CACTID: Poller[0] Host[9] DS[194] SNMP: v2: xxx.xxx.xxx.xxx, dsname: load_5min, oid: .1.3.6.1.4.1.2021.10.1.3.2, value:
U
10/19/2005 05:10:33 PM - CACTID: Poller[0] Host[9] DS[193] WARNING: Result from SNMP not valid. Partial Result: ...
10/19/2005 05:10:33 PM - CACTID: Poller[0] Host[9] DS[193] SNMP: v2: xxx.xxx.xxx.xxx, dsname: load_15min, oid: .1.3.6.1.4.1.2021.10.1.3.3, value
: U
[...]

That same problem on all boxes.
Top
User avatar
rony
Developer/Forum Admin
Posts: 6022
Joined: Mon Nov 17, 2003 6:35 pm
Location: Michigan, USA
Contact:
Contact rony

Post by rony »

What version of cactid are you running?
[size=117][i][b]Tony Roman[/b][/i][/size]
[size=84][i]Experience is what causes a person to make new mistakes instead of old ones.[/i][/size]
[size=84][i]There are only 3 way to complete a project: Good, Fast or Cheap, pick two.[/i][/size]
[size=84][i]With age comes wisdom, what you choose to do with it determines whether or not you are wise.[/i][/size]
Top
kanada
Cacti User
Posts: 137
Joined: Sun Aug 28, 2005 12:51 pm

Post by kanada »

Im using cacti ver. 0.6.8g and cactid ver. 0.8.6f-1
Top
User avatar
pirx
Cacti User
Posts: 199
Joined: Tue Feb 10, 2004 10:08 am
Location: Esslingen, Germany

Post by pirx »

I've the same problems since the update to cactid-0.8.6f. TheWitness knows about the problem, but we haven't found a solution yet.

http://forums.cacti.net/viewtopic.php?t=9760

Additionally we had contact by PM and Mail.

Ralf
Top
kanada
Cacti User
Posts: 137
Joined: Sun Aug 28, 2005 12:51 pm

Post by kanada »

Yes i see, problem is still active.. too bad, couse i need this monitoring load average..
Top
User avatar
pirx
Cacti User
Posts: 199
Joined: Tue Feb 10, 2004 10:08 am
Location: Esslingen, Germany

Post by pirx »

kanada wrote:Yes i see, problem is still active.. too bad, couse i need this monitoring load average..
TheWitness is looking for a system he could poll from the internet to reproduce the problem. I've no chance to put one of the affected hosts outside our firewall.

Would it be possible for TheWitness to reach one of your systems?

Ralf
Top
sickdm
Posts: 5
Joined: Mon Dec 05, 2005 2:43 am
Contact:
Contact sickdm

Post by sickdm »

I am seeing the same issue

The monitor server is a debian box with a fresh install of cacti 0.8.6g + cactid 0.8.6f-1.

The remote host is a newly installed debian sarge machine with snmpd.

Here is the portion of the log generated when I run cactid at the console:

CACTID: Host[6] DS[15] WARNING: Result from SNMP not valid. Partial Result: ...
CACTID: Host[6] DS[15] SNMP: v2: XX.XX.XX.XX, dsname: load_1min, oid: .1.3.6.1.4.1.2021.10.1.3.1, value: U
CACTID: Host[6] DS[17] WARNING: Result from SNMP not valid. Partial Result: ...
CACTID: Host[6] DS[17] SNMP: v2: XX.XX.XX.XX, dsname: load_5min, oid: .1.3.6.1.4.1.2021.10.1.3.2, value: U
CACTID: Host[6] DS[16] WARNING: Result from SNMP not valid. Partial Result: ...
CACTID: Host[6] DS[16] SNMP: v2: XX.XX.XX.XX, dsname: load_15min, oid: .1.3.6.1.4.1.2021.10.1.3.3, value: U

If any of the developers would like to poll this machine via SNMP to reproduce this bug, please PM me and I can arrange for this.
Top
User avatar
pirx
Cacti User
Posts: 199
Joined: Tue Feb 10, 2004 10:08 am
Location: Esslingen, Germany

Post by pirx »

sickdm wrote:I am seeing the same issue

The monitor server is a debian box with a fresh install of cacti 0.8.6g + cactid 0.8.6f-1.

The remote host is a newly installed debian sarge machine with snmpd.

Here is the portion of the log generated when I run cactid at the console:

CACTID: Host[6] DS[15] WARNING: Result from SNMP not valid. Partial Result: ...
CACTID: Host[6] DS[15] SNMP: v2: XX.XX.XX.XX, dsname: load_1min, oid: .1.3.6.1.4.1.2021.10.1.3.1, value: U
CACTID: Host[6] DS[17] WARNING: Result from SNMP not valid. Partial Result: ...
CACTID: Host[6] DS[17] SNMP: v2: XX.XX.XX.XX, dsname: load_5min, oid: .1.3.6.1.4.1.2021.10.1.3.2, value: U
CACTID: Host[6] DS[16] WARNING: Result from SNMP not valid. Partial Result: ...
CACTID: Host[6] DS[16] SNMP: v2: XX.XX.XX.XX, dsname: load_15min, oid: .1.3.6.1.4.1.2021.10.1.3.3, value: U

If any of the developers would like to poll this machine via SNMP to reproduce this bug, please PM me and I can arrange for this.
This problem should be fixed in cactid086g-beta. Myabe you can try the beta version and give TheWitness some feedback.

http://forums.cacti.net/viewtopic.php?t=10660

Ralf
Top
sickdm
Posts: 5
Joined: Mon Dec 05, 2005 2:43 am
Contact:
Contact sickdm

Post by sickdm »

Ralf,

Thank you for posting the link to the beta version of cactid. This beta release fixed this issue.

Best,

Anthony
Top
Post Reply

Return to “Help: Linux/Unix Specific”

Who is online

Users browsing this forum: No registered users and 5 guests