Greetings,
I am looking for some technical mathematical information on how Cacti calculates in/out bits/sec. Is it querying MIB 1.3.6.1.2.1.2.2.1.10 - ifInOctets for a specific interface and dividing by 8 to get bits/sec?
Next, does anyone know if this MIB is an instantaneous snapshot of the bandwidth through the port at that one point in time or is it a 5 minute average? The RFC doesn't really say.
If it's just a query of instantaneous data, the graph is technically missing 4 minutes and 59 seconds worth of data, isn't it? If so, with regards to a Cisco device, is there a different Cisco-specific MIB that can be queried that gives a 5 minute average if the aforementioned MIB is only a snapshot?
Thank you,
MIB Calculations
Moderators: Developers, Moderators
-
rony
- Developer/Forum Admin
- Posts: 6022
- Joined: Mon Nov 17, 2003 6:35 pm
- Location: Michigan, USA
- Contact:
Cacti just passes the values it gets from the devices to RRDTool.
Check out rrdtool documentation at http://www.rrdtool.org
Check out rrdtool documentation at http://www.rrdtool.org
[size=117][i][b]Tony Roman[/b][/i][/size]
[size=84][i]Experience is what causes a person to make new mistakes instead of old ones.[/i][/size]
[size=84][i]There are only 3 way to complete a project: Good, Fast or Cheap, pick two.[/i][/size]
[size=84][i]With age comes wisdom, what you choose to do with it determines whether or not you are wise.[/i][/size]
[size=84][i]Experience is what causes a person to make new mistakes instead of old ones.[/i][/size]
[size=84][i]There are only 3 way to complete a project: Good, Fast or Cheap, pick two.[/i][/size]
[size=84][i]With age comes wisdom, what you choose to do with it determines whether or not you are wise.[/i][/size]
Who is online
Users browsing this forum: No registered users and 0 guests