No graphs after update

[expat]

Performed an upgrade from 0.8.5 to 0.8.6g.

First problem I found was that the cactid application fails with the following message:

Code: Select all

11:42:31[cactiuser@cacti]$ /usr/local/cactid/bin/cactid 
cactid version 0.8.5a starting.
Using cactid config file [/etc/cactid.conf].
Connecting to MySQL database 'cacti' on 'localhost'...
Cactid Ready.
Connecting to MySQL database 'cacti' on 'localhost'...
Segmentation fault

So I switched back to using cmd.php for the moment. All seems to go fine, except I'm no longer getting any updates to any of my graphs! The cmd.php exits as follows:

Code: Select all

09/27/2005 11:36:49 AM - CMDPHP: Poller[0] Host[50] DS[1721] SNMP: v1: 194.204.96.81, dsname: traffic_in, oid: .1.3.6.1.2.1.2.2.1.10.1, output: 1067601498
09/27/2005 11:36:49 AM - CMDPHP: Poller[0] Host[50] DS[1721] SNMP: v1: 194.204.96.81, dsname: traffic_out, oid: .1.3.6.1.2.1.2.2.1.16.1, output: 793099394
09/27/2005 11:36:49 AM - CMDPHP: Poller[0] Host[50] DS[1722] SNMP: v1: 194.204.96.81, dsname: cpu_nice, oid: .1.3.6.1.4.1.2021.11.51.0, output: 4939
09/27/2005 11:36:50 AM - CMDPHP: Poller[0] Host[50] DS[1723] SNMP: v1: 194.204.96.81, dsname: cpu_system, oid: .1.3.6.1.4.1.2021.11.52.0, output: 13557563
09/27/2005 11:36:50 AM - CMDPHP: Poller[0] Host[50] DS[1724] SNMP: v1: 194.204.96.81, dsname: cpu_user, oid: .1.3.6.1.4.1.2021.11.50.0, output: 84076104
09/27/2005 11:36:50 AM - CMDPHP: Poller[0] Host[50] DS[1725] SNMP: v1: 194.204.96.81, dsname: mem_buffers, oid: .1.3.6.1.4.1.2021.4.14.0, output: 0
09/27/2005 11:36:50 AM - CMDPHP: Poller[0] Host[50] DS[1726] SNMP: v1: 194.204.96.81, dsname: mem_cache, oid: .1.3.6.1.4.1.2021.4.15.0, output: 275808
09/27/2005 11:36:50 AM - CMDPHP: Poller[0] Host[50] DS[1727] SNMP: v1: 194.204.96.81, dsname: mem_free, oid: .1.3.6.1.4.1.2021.4.6.0, output: 119396
09/27/2005 11:36:50 AM - CMDPHP: Poller[0] Time: 128.8999 s, Theads: N/A, Hosts: 29

Why is cactid failing and why are my graphs no longer being updated??

TIA.

Iain.

[gandalf]

cactid: Perhaps using cactid 0.8.6e (current stable release) will solve the segfault. There's work in progress by TheWitness for cactid-0.8.6f.

cmd.php: Sorry, no clue

Reinhard

[expat]

http://www.cacti.net/download_cacti.php shows 0.8.6g as the current stable branch. Is this not the case??

Regs.

Iain.

[fmangeant]

You should update cactid (the C poller) to 0.8.6e : http://cacti.net/cactid_download.php