WeatherBug script & templates

websat · Post by **websat** » Sat Sep 10, 2005 11:44 am

Hi
I have a weather station (vantage pro 2) i collect the weather data myself, how i can use them to make graph with cacti ?

hbokh · Post by **hbokh** » Sat Sep 10, 2005 5:37 pm

TheWitness wrote:You need to modify the template to include a negative minimum value and then "tune" the RRD files. With the "rrdtool tune" function, you can change your existing RRF files MAX and MIN values.

Ah, I should have known / remembered this...
However "rrdtool tune <myfile.rrd>" shows that the minimum is already set to -200 as is the template.

Code: Select all

DS[Temp] typ: GAUGE     hbt: 600        min: -200.0000  max: 200.0000

so it looks like we Europeans are prepared.

websat · Post by **websat** » Sun Sep 11, 2005 4:54 am

websat wrote:Hi
I have a weather station (vantage pro 2) i collect the weather data myself, how i can use them to make graph with cacti ?

Nobody can help me ?

seveny · Post by **seveny** » Mon Sep 12, 2005 1:34 am

Hi,

I have a WS2300 weatherstation and using my own script and templates.
Still beta because of a bug with DS-duplicates... But this can me corrected manually

Check out http://www.knopfdruck.net/projekte/linu ... /download/

--Sven

websat · Post by **websat** » Mon Sep 12, 2005 9:58 am

is there a solution to make graphs from the data of my weather station, davis vantage pro 2, i use the davis weatherlink software, the data are on an html page...

Alives · Post by **Alives** » Mon Sep 12, 2005 10:03 am

use LWP::Simple to scrape the html. you can get it from CPAN.

bendsley · Post by **bendsley** » Mon Sep 12, 2005 10:41 am

I had asked this question earlier in this thread, but it looks like no one answered.

How do I add this? Do I need to add this as a host? I have the METAR code already, assuming the METAR code is the 4-letter identifier (KAMA).

Alives · Post by **Alives** » Mon Sep 12, 2005 10:44 am

trial and error ususally clears these questions up.

add a host. give it some ip.

hermatize · Post by **hermatize** » Mon Sep 12, 2005 11:22 am

i sucessfully got graphs up and cmd.php shows correct info and php poller is still working .... butt i get no info on my graphs i used an ip from a device currently not being graphed show the device shows up....can anyone give me some advice to get this thing fully working.

Thanks In Advance !!!!!

bendsley · Post by **bendsley** » Mon Sep 12, 2005 11:57 am

Alives wrote:trial and error ususally clears these questions up.

add a host. give it some ip.

It's responses like this that aren't helpful to anyone. If someone asks a question, please be clear and consise in your answer.

If you've made this work, and know how to do it, write it down so others can use it as well, otherwise its useless.

Alives · Post by **Alives** » Mon Sep 12, 2005 3:26 pm

You want to Add a new host. I dont know if it matters if its a valid one or not. you just need a host object to assign the graphs to.

codegrinder · Post by **codegrinder** » Wed Sep 14, 2005 12:46 am

LWP::Simple perl module

where do i get this from. im running windows install. (i hate it too) my raid cards wont work with linux.

Frances · Post by **Frances** » Thu Sep 15, 2005 11:55 am

Has anybody got a template for this that was exported from 0.8.6g?

codegrinder · Post by **codegrinder** » Thu Sep 15, 2005 12:32 pm

Alives wrote:You want to Add a new host. I dont know if it matters if its a valid one or not. you just need a host object to assign the graphs to.

ya thats what i had to do. i just added 127.0.0.1 so that it has something to look at and seems like its worked now.

http://graphs.codegrinder.net

Alives · Post by **Alives** » Thu Sep 15, 2005 12:44 pm

nice graphs! how do you get the font to change like that?

also, im beginning to thing the pressure isnt working right...

Cacti

WeatherBug script & templates

weatherstation

Adding this

Who is online