Cisco 3750 Issues

ermedic · Post by **ermedic** » Fri Aug 05, 2005 1:50 pm

I am able to add a 3750 without any problems. Cacti is pulling the SNMP info and interface info....no problem there either. I pick the graphs I want to add.....I wait for Cacti to poll....but the graphs never get created.

I have added all flavors of Cisco switches and routers without an issue...so I know Cacti is working. Just seems to be an issue with these 3750s. Anyone have a similar problem/

BSOD2600 · Post by **BSOD2600** » Fri Aug 05, 2005 3:43 pm

Does cacti consider the device down?
What poller uptime detection method are you using?

ermedic · Post by **ermedic** » Mon Aug 08, 2005 6:12 am

Cacti says the status of the device is "unknown"

Downed Host detection is SNMP - Reliable with a UDP ping.

Thanks for any help you can give me with this!!!

BoosterX · Post by **BoosterX** » Tue Aug 09, 2005 3:27 pm

have you enabled snmp in ios ?

Post by **TheWitness** » Tue Aug 09, 2005 5:33 pm

This is very odd. Do you see interfaces and have you attempted to create the graphs?

TheWitness

ermedic · Post by **ermedic** » Wed Aug 10, 2005 6:11 am

SNMP is enabled and when I add the device, it shows me all of the available interfaces. So I pick the interfaces that I want, and add the graphs and cacti tells me that the graphs have been created.
When I go to look at the graphs, they are all dead links on the page.....no graphs have been created.

Again, this only happens with my 3750's.....

duckhead · Post by **duckhead** » Wed Aug 10, 2005 4:34 pm

I've got 4 3750's, all of which are graphing without trouble. I doubt it's a Cacti issue.

Post by **TheWitness** » Wed Aug 10, 2005 5:05 pm

Screen prints please with notes if you can...

TheWitness

ermedic · Post by **ermedic** » Thu Aug 11, 2005 5:38 am

I "think" I figured this out.....

I increased the time allowed for PHP to poll these devices.....deleted the devices....then added them back in. They seem to be working at this point..

The only thing that I don't understand is why a fully populate 6500 wouldn't have given me this same trouble.

Cisco 3750 Issues

Cisco 3750 Issues

Who is online