Powerware 9305 + 9120 UPS host template

richiev · Post by **richiev** » Tue Jul 05, 2005 2:59 am

Hi all,

Here is a host template (with dependencies) that I have created for Powerware 9305 + 9120 UPS's that have the ConnectUPS Web/SNMP adapter. This is my first attempt at a template and it seems to work fine on my Cacti (ver 0.8.6f) and the values seem fine.

The host templates display graphs for Output Current (Amps), Output Load (%), Output Power (Watts), and Output Voltage (Volts) and Input Voltage (Volts) for each of the 3 phases on the UPS. It also graphs Battery Voltage (Volts).

Hope this helps anyone that needs it. (and I hope it is right)

Cheers

bdearlove · Post by **bdearlove** » Thu Jul 07, 2005 3:51 pm

Hey!

Just gave it a try and it gave a: Error: XML: Hash version does not exist.

I'm going to try and upgrade to F and see if it works! Wish me luck!

fla_roadkill · Post by **fla_roadkill** » Wed Jul 13, 2005 9:22 am

Did it work upgrading to F? I have Cacti d, installed patched to E, and THOLD installed. I tried adding in F to my config_array.php but it just broke cacti. Any help to install this template while running THOLD.

gheppner · Post by **gheppner** » Fri Jul 17, 2009 10:24 am

Great templates. They seem to also work with the Power 9355 and 9333.

I added a couple of potentially useful graphs to your host template - "Battery percent charge" and "Battery runtime."

Cacti

Powerware 9305 + 9120 UPS host template

Powerware 9305 + 9120 UPS host template

Darn

Who is online