Graph ATM PVC

[salah]

Hello everybody,

Before this post i have search on the Net any solution but nothing find.

How can i graph atm interface (pvc) and not only ports ?

Thanks a lot

ps : sorry for my broken english

[Morgan]

when you create graphs make sure the interface listing in the snmp query is up to date and look for the following.

Code: Select all

7 Up ATM0-atm layer ATM0-atm layer  atm(37) 0    
8 Up ATM0.0-atm subif ATM0.0-atm subif  atmSubInterface(134) 320000    
9 Up ATM0-aal5 layer ATM0-aal5 layer  aal5(49) 0    
10 Up ATM0.0-aal5 layer ATM0.0-aal5 layer  aal5(49) 320000    
11 Removed
12 Up ATM0.1-atm subif ATM0.1-atm subif DESCRIPTION REMOVED atmSubInterface(134) 320000    
13 Up ATM0.1-aal5 layer ATM0.1-aal5 layer DESCRIPTION REMOVED aal5(49) 320000  IPREMOVED  
14 Down BRI0-Physical BR0  isdns(75) 144000    

interfcae 7 is your hardware interface. ignore it, it provides no usefull information

the one you're looking for is your equivalent to interface 13 above

13 Up ATM0.1-aal5 layer ATM0.1-aal5 layer DESCRIPTION REMOVED aal5(49) 320000 IPREMOVED


to graph ATM pvc's you need to graph the AAL5 layer as indicated in the IF-MIB part of the poll. Also, you can easily identify the active interface you need to graph as it has an IP address where the SUBIF one doesn't.

hope this helps.

Morgan

[salah]

First, thanks to help me.

Then i don't understand exactely what you mean.

This is my interface snmp query from atm switch (Marconi ASX-1000) :

5242932 1 DS3/E3 1C1 30 44736000
5242933 1 Atm Interface 1C1 37 40704000 47:77:05:80:FF:E9:EA:00:00:0A:01:01:00:F5:20:48:0D:00:10:00

1C1 is the switch port.

Graph the "DS3/E3" has no effect.
Graph the "Atm Interface 1C1" is ok, but this include all pvc in port 1C1...

So is it possible to graph all pvc on port 1C1 and how ? there is an other template ?

Tkanks a lot

[Morgan]

arg ok, i didn't think u'd be using a marconi switch.

try to snmpwalk your switch and grep for something specific to your pvc , since it doesnt seem to show up in the IF mib.

i was showing you how to do it with a cisco router

[salah]

lol

oki i will try it,

if I find a solution, i will post it on this forum.

Thanks