Cisco 7200 router template

[Pumpi]

There was a reason to ask u about our PHP version stoelerl

See my post in this this topic:

Using PHP 4.3.10 instead of 5.0.3 fix this problem.

Seems step from PHP 4.x to 5.x is not smooth......

[solefald]

Wow! What an awesome job! Thank you, it works great!

[stoelerl]

There was a reason to ask u about our PHP version stoelerl

See my post in this this topic:

Using PHP 4.3.10 instead of 5.0.3 fix this problem.

Seems step from PHP 4.x to 5.x is not smooth......

It is working now, sorry for delay. But I was sick.
Thanks Laurens

[jhottle]

I am running all the correct software verisons, the template imports fine, but I get an error message when polling my router for interface statistics.

Here is the error I recieve:

Error: Duplicate DS Name: traffic_in
Then it tells me error opening files, no such file found.

Jesse

[Pumpi]

jhottle,

check Data Templates Interface - Traffic (should be used).
The template should only have one DS traffic_in and one DS traffic_out.

Delete the duplicate DS traffic_in if present.

[j_h]

This also works for 7500, 7600, 10K and GSR routers. I did not try any others yet.

[zorrolero]

hi all,

i successfully imported the 7200-template, but i wonder if it works right, cause the free and used memory shown by the graphes is not the sum of the total installed memory on the monitored router...

here is the output of "show version" with the total amount of memory:
---
cisco 7206VXR (NPE400) processor (revision A) with 245760K/16384K bytes of memory.
Processor board ID 30467831
R7000 CPU at 350Mhz, Implementation 39, Rev 3.3, 256KB L2, 4096KB L3 Cache
6 slot VXR midplane, Version 2.7
---

...and here the associated graph:




any hints are welcome....

greetz
zorrolero

[zorrolero]

hey roddie,

thx for the fast answer and the explanation...i'm looking forward to the export of your templates.

groetjes
zorrolero

[adrianmarsh]

guys, I'm fairly new to Cacti/SNMP, how do you figure out which OID is the correct one to use for a task?

I'm trying out this template now against my 7609, but as well as memory and CPU usage, I also want to pull out the number of active PDP calls per APN on the cisco. I've snmp-walked the Cisco tree, but of the 33000+ OIDs I'm not sure which one is the one I want... Thats the bit I can't figure out how to find out...

[churchi]

just wanted to say AWESOME job on this template. works really well with our 7206.

thanks for the template.

has anyone had it working on a 6509? or have a template for a 6509?

cheers

[mpking]

Does this work with PHP 5 now?

I don't want my data interfaces to get whacked.

[Super-Mike]

I use cisco 7206VXR (NPE-G2) how VPN server, for connect users. How can you show how many users are connected to it connect users?
snmpwalk
IF-MIB::ifNumber.0 = INTEGER: 927

[gandalf]

Find help for creating own SNMP based Graphs at the first link of my signature
Reinhard

[Super-Mike]

I set up a schedule of interfaces.

The schedule is wrong.
Example in the picture.
Although the number of interfaces is 1000.

Code: Select all

# snmpwalk -Os -c public -v 2c 192.168.2.1 .1.3.6.1.2.1.2.1.0
ifNumber.0 = INTEGER: 998
# snmpwalk -Os -c public -v 2c 192.168.2.1 .1.3.6.1.2.1.2.1.0
ifNumber.0 = INTEGER: 1224
# snmpwalk -Os -c public -v 2c 192.168.2.1 .1.3.6.1.2.1.2.1.0
ifNumber.0 = INTEGER: 1007
#

I do not understand what has been done wrong.[/b]

[Super-Mike]

Who can see the XML file?
Read the HOWTO's, but I can not find the error.