No Graphs Show Up

Post support questions that relate to the Windows 2003/2000/XP operating systems.

Moderators: Developers, Moderators

Post Reply
FIacusso
Posts: 25
Joined: Fri Jun 17, 2005 11:33 am

No Graphs Show Up

Post by FIacusso »

Hi all,

I am still having a problem with the graphs showing up.

c:/rrdtool/rrdtool.exe graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="Cisco Switch - Traffic - Fa0/23" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="bits per second" \
--slope-mode \
DEF:a="C\:\apache\Apache2\htdocs\cacti/rra/cisco_switch_traffic_in_21.rrd":traffic_in:AVERAGE \
DEF:b="C\:\apache\Apache2\htdocs\cacti/rra/cisco_switch_traffic_in_21.rrd":traffic_out:AVERAGE \
CDEF:cdefa=a,8,* \
CDEF:cdefe=b,8,* \
AREA:cdefa#00CF00:"Inbound" \
GPRINT:cdefa:LAST:" Current\:%8.2lf %s" \
GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s\n" \
LINE1:cdefe#002A97:"Outbound" \
GPRINT:cdefe:LAST:"Current\:%8.2lf %s" \
GPRINT:cdefe:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefe:MAX:"Maximum\:%8.2lf %s"

It just will not create in the rra folder.... any troubleshooting tips??

Thank you all,

Fabiano
User avatar
BSOD2600
Cacti Moderator
Posts: 12171
Joined: Sat May 08, 2004 12:44 pm
Location: USA

Post by BSOD2600 »

Turn the cacti polling level to debug for one cycle and post the output. If it contains WEBLOG outputs, don't bother posting since it just clutters up the log and makes it harder to read. Disable WEBEVENTS logging if that happens and try again.
FIacusso
Posts: 25
Joined: Fri Jun 17, 2005 11:33 am

my output...thank you

Post by FIacusso »

06/21/2005 08:19:42 AM - WEBLOG: Poller[0] CACTI2RRD: c:\rrdtool\rrdtool.exe graph - --imgformat=PNG --start=-86400 --end=-300 --title="Cisco Switch - Traffic - Fa0/23" --rigid --base=1000 --height=120 --width=500 --alt-autoscale-max --lower-limit=0 --vertical-label="bits per second" DEF:a="C\:\apache\Apache2\htdocs\cacti/rra/cisco_switch_traffic_in_21.rrd":traffic_in:AVERAGE DEF:b="C\:\apache\Apache2\htdocs\cacti/rra/cisco_switch_traffic_in_21.rrd":traffic_out:AVERAGE CDEF:cdefa=a,8,* CDEF:cdefe=b,8,* AREA:cdefa#00CF00:"Inbound" GPRINT:cdefa:LAST:" Current\:%8.2lf %s" GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s\n" LINE1:cdefe#002A97:"Outbound" GPRINT:cdefe:LAST:"Current\:%8.2lf %s" GPRINT:cdefe:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefe:MAX:"Maximum\:%8.2lf %s"
06/21/2005 08:19:40 AM - WEBLOG: Poller[0] CACTI2RRD: c:\rrdtool\rrdtool.exe graph - --imgformat=PNG --start=-86400 --end=-300 --title="Cisco Switch - Traffic - Fa0/23" --rigid --base=1000 --height=120 --width=500 --alt-autoscale-max --lower-limit=0 --vertical-label="bits per second" DEF:a="C\:\apache\Apache2\htdocs\cacti/rra/cisco_switch_traffic_in_21.rrd":traffic_in:AVERAGE DEF:b="C\:\apache\Apache2\htdocs\cacti/rra/cisco_switch_traffic_in_21.rrd":traffic_out:AVERAGE CDEF:cdefa=a,8,* CDEF:cdefe=b,8,* AREA:cdefa#00CF00:"Inbound" GPRINT:cdefa:LAST:" Current\:%8.2lf %s" GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s\n" LINE1:cdefe#002A97:"Outbound" GPRINT:cdefe:LAST:"Current\:%8.2lf %s" GPRINT:cdefe:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefe:MAX:"Maximum\:%8.2lf %s"
06/21/2005 08:18:54 AM - CMDPHP: Poller[0] Time: 1.5622 s, Theads: N/A, Hosts: 3
06/21/2005 08:18:54 AM - PHPSVR: Poller[0] DEBUG: PHP Script Server Shutdown request received, exiting
06/21/2005 08:18:54 AM - CMDPHP: Poller[0] Host[5] SNMP: v1: 172.16.221.39, dsname: traffic_in, oid: .1.3.6.1.2.1.2.2.1.10.25, output: 155412727
06/21/2005 08:18:54 AM - CMDPHP: Poller[0] Host[5] SNMP: v1: 172.16.221.39, dsname: traffic_out, oid: .1.3.6.1.2.1.2.2.1.16.25, output: 119415126
06/21/2005 08:18:54 AM - CMDPHP: Poller[0] Host[5] SNMP: v1: 172.16.221.39, dsname: traffic_in, oid: .1.3.6.1.2.1.2.2.1.10.24, output: 3631197361
06/21/2005 08:18:54 AM - CMDPHP: Poller[0] Host[5] SNMP: v1: 172.16.221.39, dsname: traffic_out, oid: .1.3.6.1.2.1.2.2.1.16.24, output: 1539618503
06/21/2005 08:18:54 AM - CMDPHP: Poller[0] Host[5] RECACHE: Processing 1 items in the auto reindex cache for '172.16.221.39'.
06/21/2005 08:18:54 AM - CMDPHP: Poller[0] Host[5] SNMP: Host responded to SNMP
06/21/2005 08:18:54 AM - CMDPHP: Poller[0] PHP Script Server Started Properly
06/21/2005 08:18:54 AM - PHPSVR: Poller[0] PHP Script Server has Started - Parent is cmd
06/21/2005 08:18:54 AM - PHPSVR: Poller[0] DEBUG: FILENM: c:\apache\apache2\htdocs\cacti\script_server.php
06/21/2005 08:18:54 AM - PHPSVR: Poller[0] DEBUG: DIRNAM: c:/apache/apache2/htdocs/cacti
06/21/2005 08:18:54 AM - PHPSVR: Poller[0] DEBUG: GETCWD: c:/apache/apache2/htdocs/cacti
06/21/2005 08:18:54 AM - PHPSVR: Poller[0] DEBUG: SERVER: cmd
06/21/2005 08:16:07 AM - WEBLOG: Poller[0] CACTI2RRD: c:\rrdtool\rrdtool.exe graph - --imgformat=PNG --start=-86400 --end=-300 --title="Cisco Switch - Traffic - Fa0/23" --rigid --base=1000 --height=120 --width=500 --alt-autoscale-max --lower-limit=0 --vertical-label="bits per second" DEF:a="C\:\apache\Apache2\htdocs\cacti/rra/cisco_switch_traffic_in_21.rrd":traffic_in:AVERAGE DEF:b="C\:\apache\Apache2\htdocs\cacti/rra/cisco_switch_traffic_in_21.rrd":traffic_out:AVERAGE CDEF:cdefa=a,8,* CDEF:cdefe=b,8,* AREA:cdefa#00CF00:"Inbound" GPRINT:cdefa:LAST:" Current\:%8.2lf %s" GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s\n" LINE1:cdefe#002A97:"Outbound" GPRINT:cdefe:LAST:"Current\:%8.2lf %s" GPRINT:cdefe:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefe:MAX:"Maximum\:%8.2lf %s"
06/21/2005 08:16:05 AM - WEBLOG: Poller[0] CACTI2RRD: c:\rrdtool\rrdtool.exe graph - --imgformat=PNG --start=-86400 --end=-300 --title="Cisco Switch - Traffic - Fa0/23" --rigid --base=1000 --height=120 --width=500 --alt-autoscale-max --lower-limit=0 --vertical-label="bits per second" DEF:a="C\:\apache\Apache2\htdocs\cacti/rra/cisco_switch_traffic_in_21.rrd":traffic_in:AVERAGE DEF:b="C\:\apache\Apache2\htdocs\cacti/rra/cisco_switch_traffic_in_21.rrd":traffic_out:AVERAGE CDEF:cdefa=a,8,* CDEF:cdefe=b,8,* AREA:cdefa#00CF00:"Inbound" GPRINT:cdefa:LAST:" Current\:%8.2lf %s" GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s\n" LINE1:cdefe#002A97:"Outbound" GPRINT:cdefe:LAST:"Current\:%8.2lf %s" GPRINT:cdefe:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefe:MAX:"Maximum\:%8.2lf %s"

C:\>php -m
[PHP Modules]
bcmath
calendar
com
ctype
ftp
mysql
odbc
overload
pcre
session
snmp
sockets
standard
tokenizer
wddx
xml
zlib

[Zend Modules]


Thank you for your continuous help.
User avatar
BSOD2600
Cacti Moderator
Posts: 12171
Joined: Sat May 08, 2004 12:44 pm
Location: USA

Post by BSOD2600 »

You apparently did not read what I wrote. The WEBLOG events are not needed in your log file. Disable them.

172.16.221.39 is the host with the graph problem?

Goto Settings->General and set Logging Level to DEBUG. Then open a command line and run the following one at a time.

"php <path_cacti>/cmd.php" -> post output
"php poller.php" -> post output
FIacusso
Posts: 25
Joined: Fri Jun 17, 2005 11:33 am

sorry bout that... here you go.

Post by FIacusso »

06/21/2005 12:21:20 PM - CMDPHP: Poller[0] Host[5] SNMP: v1: 172.16.221.39, dsna
me: traffic_out, oid: .1.3.6.1.2.1.2.2.1.16.24, output: 1111128
06/21/2005 12:21:20 PM - CMDPHP: Poller[0] Host[5] SNMP: v1: 172.16.221.39, dsna
me: traffic_in, oid: .1.3.6.1.2.1.2.2.1.10.24, output: 1046580215
06/21/2005 12:21:20 PM - CMDPHP: Poller[0] Host[5] SNMP: v1: 172.16.221.39, dsna
me: traffic_out, oid: .1.3.6.1.2.1.2.2.1.16.25, output: 72515
06/21/2005 12:21:20 PM - CMDPHP: Poller[0] Host[5] SNMP: v1: 172.16.221.39, dsna
me: traffic_in, oid: .1.3.6.1.2.1.2.2.1.10.25, output: 116125
06/21/2005 12:21:20 PM - CMDPHP: Poller[0] Host[5] SNMP: v1: 172.16.221.39, dsna
me: traffic_out, oid: .1.3.6.1.2.1.2.2.1.16.1, output: 994236
06/21/2005 12:21:20 PM - CMDPHP: Poller[0] Host[5] SNMP: v1: 172.16.221.39, dsna
me: traffic_in, oid: .1.3.6.1.2.1.2.2.1.10.1, output: 949100
06/21/2005 12:21:21 PM - CMDPHP: Poller[0] Host[5] SNMP: v1: 172.16.221.39, dsna
me: traffic_out, oid: .1.3.6.1.2.1.2.2.1.16.2, output: 64
06/21/2005 12:21:21 PM - CMDPHP: Poller[0] Host[5] SNMP: v1: 172.16.221.39, dsna
me: traffic_in, oid: .1.3.6.1.2.1.2.2.1.10.2, output: 64
06/21/2005 12:21:21 PM - CMDPHP: Poller[0] Time: 2.6324 s, Theads: N/A, Hosts: 3


C:\net-snmp\bin>php poller.php
Status: 404
Content-type: text/html
X-Powered-By: PHP/4.3.11

No input file specified.

C:\net-snmp\bin>

Thank you.
User avatar
TheWitness
Developer
Posts: 17061
Joined: Tue May 14, 2002 5:08 pm
Location: MI, USA
Contact:

Post by TheWitness »

You need to run "php poller.php" from your Cacti Webroot folder. The same applies for your scheduled task.

TheWitness
True understanding begins only when we realize how little we truly understand...

Life is an adventure, let yours begin with Cacti!

Author of dozens of Cacti plugins and customization's. Advocate of LAMP, MariaDB, IBM Spectrum LSF and the world of batch. Creator of IBM Spectrum RTM, author of quite a bit of unpublished work and most of Cacti's bugs.
_________________
Official Cacti Documentation
GitHub Repository with Supported Plugins
Percona Device Packages (no support)
Interesting Device Packages


For those wondering, I'm still here, but lost in the shadows. Yearning for less bugs. Who want's a Cacti 1.3/2.0? Streams anyone?
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests