[XML] Cisco NBAR Protocol Statistics Query 1.2a [UPDATED]

chloe · Post by **chloe** » Tue Jun 14, 2005 7:05 am

I have always a problem !!
on my environment PC if I make the following command-line under dos:
snmpwalk -v1 -c caat 125.65.100.2 1.3.6.1.4.1.9.9.244.1.2.1.1.2

I have a reponse

chloe · Post by **chloe** » Tue Jun 14, 2005 7:09 am

in the command-line snmpwalk If I no specifie not no the version snmp used.

snmpwalk -c xxx @IP 1.3.6.1.4.1.9.9.244.1.2.1.1.2
snmpwalk: No securityName specified

I have an error message

chloe · Post by **chloe** » Tue Jun 14, 2005 9:50 am

How to force the requet snmp and or force it

chloe · Post by **chloe** » Tue Jun 14, 2005 9:53 am

Nevertheless i Choose the SNMP version equal 1 for my router nbar in the SNMP Options of devices

chloe · Post by **chloe** » Tue Jun 14, 2005 9:56 am

chloe · Post by **chloe** » Tue Jun 14, 2005 9:58 am

The script SS puts a lot of time to discovery protocols and interfaces tag

chloe · Post by **chloe** » Wed Jun 15, 2005 3:32 pm

Hy roddie
please help me for resolve my problem.
teh script don't work.
i graph any protocol in this graph
please SOS

chloe · Post by **chloe** » Thu Jun 16, 2005 2:20 am

roddie
i have installed a script but in version 1.2.
i don't monitore this ressources

I hope that it is going to go to you to understand my problem

chloe · Post by **chloe** » Thu Jun 16, 2005 9:39 am

roddie
what do you need exactly to be able to help me
It is sufficient the images above

kingaru · Post by **kingaru** » Sun Jun 19, 2005 9:14 am

1. Not evry IOS supports SNMP NBAR MIBS. This means if you have enabled ip nbar in the configuration it does not mean that it will enable your SNMP based NBAR monitoring. For instance Cisco 3620 does not have this options at all the old 26xx do have but in IP PLUS/ENTERPRISE BASIC featuire set base IOSes and dont have in the IP SEC/3DES/FW based images. Refer to the Cisco web site in otder to make sure that your IOS does support NBAR over SNMP.
2. Just a general advice .. when you post screeens it is advisable to remove community strings and IP addresses of your routers. I hope that nobody still broke in to your router

I hope it explains
Igor

chloe wrote:roddie
i have installed a script but in version 1.2.
i don't monitore this ressources

I hope that it is going to go to you to understand my problem

chloe · Post by **chloe** » Mon Jun 20, 2005 4:34 am

Nevertheless since my console dos of the pc, the router re-lays me in a snmpwalk of the feature to nbar.
my version of IOS is 12.3(14)T2 ip base on the router C3745

chloe · Post by **chloe** » Mon Jun 20, 2005 7:52 am

kingaru i have one question for you :

my IOS it is compatible with fonctionnality NBAR over snmp

my IOS is c3745-ipbase-mz[1].123-14.T2.bin

What do you think about it ?

LeonT · Post by **LeonT** » Mon Jun 20, 2005 7:55 am

Thanks for posting this script. After adding the "." before the OID's in the PHP file it works like a charm

chloe · Post by **chloe** » Mon Jun 20, 2005 8:11 am

I try now

chloe · Post by **chloe** » Mon Jun 20, 2005 8:15 am

It's very cool it's work
thanks Leon T

[XML] Cisco NBAR Protocol Statistics Query 1.2a [UPDATED]

Who is online