hi everyone
What does the " m " next to discards result represent ?
"m" errors/sec
--ShadowPhax
Errors/Discards Template
Moderators: Developers, Moderators
As far as I can figure out, it stands for milli. You will need to multiply your number by the step time to find out the number of errors/discards you got within that timeframe.
For example, my step time is set for 300 seconds (5min), the default. On my graph, I have a 6.58m errors/s. So .00658 * 300 = 1.974 or around 2 errors within the 5 min step time.
As a rule of thumb if you're using a 300s step time, seeing 3.33millierrors/sec is roughly 1 error in 5min. 6.66millierrors/sec ~ 2 errors in 5min, etc. This applies to the Current and Maximum readings. With Average, you need to factor the length of time of your graph.
Hope this helps.
For example, my step time is set for 300 seconds (5min), the default. On my graph, I have a 6.58m errors/s. So .00658 * 300 = 1.974 or around 2 errors within the 5 min step time.
As a rule of thumb if you're using a 300s step time, seeing 3.33millierrors/sec is roughly 1 error in 5min. 6.66millierrors/sec ~ 2 errors in 5min, etc. This applies to the Current and Maximum readings. With Average, you need to factor the length of time of your graph.
Hope this helps.
-
ShadowPhax
- Posts: 10
- Joined: Wed Mar 30, 2005 3:57 am
Who is online
Users browsing this forum: No registered users and 0 guests