Another 'no graphs' thread

[koncha]

I would like to apologize if this has been fixed. I did the search and spent several hours reading and was unable to come up with a solution. Hopefully you all can help.

This is a small trial for us which we will port to a *nix machine, depending on the outcome.

Here is the info:

Windows XP SP1
IIS 5.1
MySQL 4.1
net-snmp-5.2.1
PHP 5.0.4
Cacti-0.8.6d

So my problem is that I can't get any graphs to display. Just red 'X'es. I have gone through all of the permissions (I think) and set them to everyone has full control. I have some .rrd files in the \rra folder but the time stamp on them doesn't seem to be advancing.

I have an image of what I get.

nograph.JPG

Any ideas?

[BSOD2600]

In Cacti | Settings | general | Poller Logging Level. Change to debug for one cycle and post the output.

[Jerry^]

My log file (only one graph):


06/02/2005 11:47:49 AM - WEBLOG: Poller[0] CACTI2RRD: c:\rrdtool\rrdtool.exe graph - --imgformat=PNG --start=1117703868 --end=1117705668 --title="FVS338 - Traffic - 127.0.0.1 (lo)" --rigid --base=1000 --height=120 --width=500 --alt-autoscale-max --lower-limit=0 COMMENT:"From 2005/06/02 11\:17\:48 To 2005/06/02 11\:47\:48\c" COMMENT:" \n" --vertical-label="bytes per second" DEF:a="c\:\program files\easyphp1-8\www/rra/fvs338_traffic_in_11.rrd":traffic_in:AVERAGE DEF:b="c\:\program files\easyphp1-8\www/rra/fvs338_traffic_in_11.rrd":traffic_out:AVERAGE AREA:a#00CF00:"Inbound" GPRINTLAST:" Current\:%8.2lf %s" GPRINTAVERAGE:"Average\:%8.2lf %s" GPRINTMAX:"Maximum\:%8.2lf %s\n" LINE1:b#002A97:"Outbound" GPRINTLAST:"Current\:%8.2lf %s" GPRINTAVERAGE:"Average\:%8.2lf %s" GPRINTMAX:"Maximum\:%8.2lf %s"

[BSOD2600]

Jerry^: dont highjack others threads. Start your own since your problem is most likely a different one.

[Jerry^]

Jerry^: dont highjack others threads. Start your own since your problem is most likely a different one.

I reapeat : I have exactly the same problem
(see the subject of my first post)

[BSOD2600]

Then the same goes for you. Post the debug log of cacti.

[Jerry^]

Then the same goes for you. Post the debug log of cacti.

See my my first post lol. I have already posted the debug log (for one graph only).

Thanks for your help

[rony]

If you run

Code: Select all

c:\rrdtool\rrdtool.exe graph - --imgformat=PNG --start=1117703868 --end=1117705668 --title="FVS338 - Traffic - 127.0.0.1 (lo)" --rigid --base=1000 --height=120 --width=500 --alt-autoscale-max --lower-limit=0 COMMENT:"From 2005/06/02 11\:17\:48 To 2005/06/02 11\:47\:48\c" COMMENT:" \n" --vertical-label="bytes per second" DEF:a="c\:\program files\easyphp1-8\www/rra/fvs338_traffic_in_11.rrd":traffic_in:AVERAGE DEF:b="c\:\program files\easyphp1-8\www/rra/fvs338_traffic_in_11.rrd":traffic_out:AVERAGE AREA:a#00CF00:"Inbound" GPRINT:a:LAST:" Current\:%8.2lf %s" GPRINT:a:AVERAGE:"Average\:%8.2lf %s" GPRINT:a:MAX:"Maximum\:%8.2lf %s\n" LINE1:b#002A97:"Outbound" GPRINT:b:LAST:"Current\:%8.2lf %s" GPRINT:b:AVERAGE:"Average\:%8.2lf %s" GPRINT:b:MAX:"Maximum\:%8.2lf %s"

from the command line, what happens?

[Jerry^]

Result :

ERROR: opening 'c:\program files\easyphp1-8\www/rra/fvs338_traffic_in_11.rrd': No such file or directory


There is only one file in the rra folder : .placeholder

[BSOD2600]

You have no rrd file because rrdtool has not collected any valid data.

1) Turn logging to DEBUG
2) Open a command window
3) Change Directories into your Cacti root
4) run "php <path_cacti>/cmd.php
5) post output

[Jerry^]

Thanks for your help, BSOD2600

1) Done
2) Done
3) Not cacti root... but php root I think .. Done
4) Done
5)

C:\PROGRA~1\EasyPHP1-8\php>php c:\progra~1\easyphp1-8\www\cmd.php
#!/usr/bin/php -q

06/03/2005 11:43:58 PM - CMDPHP: Poller[0] Host[1] SNMP: Device does not require SNMP

06/03/2005 11:43:58 PM - CMDPHP: Poller[0] Host[1] No host availability check possible for '127.0.0.1'.
'perl' n'est pas reconnu en tant que commande interne
ou externe, un programme excutable ou un fichier de commandes.

06/03/2005 11:43:58 PM - CMDPHP: Poller[0] Host[1] WARNING: Result from CMD not valid. Partial Result:

06/03/2005 11:43:58 PM - CMDPHP: Poller[0] Host[1] CMD: perl c:\program files\easyphp1-8\www/scripts/linux_memory.pl SwapFree:, output: U
'perl' n'est pas reconnu en tant que commande interne
ou externe, un programme excutable ou un fichier de commandes.

06/03/2005 11:43:59 PM - CMDPHP: Poller[0] Host[1] WARNING: Result from CMD not valid. Partial Result:

06/03/2005 11:43:59 PM - CMDPHP: Poller[0] Host[1] CMD: perl c:\program files\easyphp1-8\www/scripts/linux_memory.pl MemFree:, output: U 'perl' n'est pas reconnu en tant que commande interne
ou externe, un programme excutable ou un fichier de commandes.

06/03/2005 11:43:59 PM - CMDPHP: Poller[0] Host[1] WARNING: Result from CMD not valid. Partial Result:

06/03/2005 11:43:59 PM - CMDPHP: Poller[0] Host[1] CMD: perl c:\program files\easyphp1-8\www/scripts/loadavg_multi.pl, output: U
'-O' n'est pas reconnu en tant que commande interne
ou externe, un programme excutable ou un fichier de commandes.

06/03/2005 11:43:59 PM - CMDPHP: Poller[0] Host[2] SNMP: Host did not respond to SNMP

06/03/2005 11:43:59 PM - CMDPHP: Poller[0] Time: 0.4579 s, Theads: N/A, Hosts: 2


C:\PROGRA~1\EasyPHP1-8\php>



Does I need perl ? :/

[BSOD2600]

you must start it in your cacti root. If you dont have your php.exe in your system path, then you'll need to include that too when running. ex:
c:\webroot\cacti\> c:\php\php c:\webroot\cacti\cmd.php

[Jerry^]

Aaah ::


Then... 5)

C:\PROGRA~1\EasyPHP1-8\www> c:\progra~1\easyphp1-8\php\php.exe c:\progra~1\easyphp1-8\www\cmd.php


Same result than before.

[BSOD2600]

Cacti does not work with spaces in the path (not sure though about using the 8.3 method). Thats possibly the cause of your problem.

Yes, you need perl installed for pl scripts.

[TheWitness]

The perl scripts are the default for a Linux/Unix host. Try the interface graphs see if Cacti will graph them.

TheWitness