No data in graph ... HELP !!!

a2line59 · Post by **a2line59** » Sat May 28, 2005 1:38 pm

What can I do to resolve this problem ?
I have tried cactid but when i enable cacti, poller.php make nothing

Post by **TheWitness** » Sat May 28, 2005 2:11 pm

Please IM me. We can talk.

TheWitness

a2line59 · Post by **a2line59** » Mon May 30, 2005 2:56 am

sorry my english is not very good
what do you mean by IM ? (it's AIM, PM ... ?)

Post by **TheWitness** » Mon May 30, 2005 6:54 am

That is correct AIM, MSNM, and now ICQ as well.

Larry

a2line59 · Post by **a2line59** » Mon May 30, 2005 10:12 am

good news : now i return on cacti 0.8.6c and now it's OK I obtain all graphs
but if you are OK TheWitness, i will contact you. We can talk on this problem and I have some questions on cacti

a2line59 · Post by **a2line59** » Tue May 31, 2005 3:00 am

else if now i have data in graph i have always this warning for each device (cisco router) when i execute poller.php :
05/31/2005 09:44:24 AM - POLLER: Poller[0] Host[9] WARNING: Recache Event Detected for Host

so i would try cactid to resolve this problem and too because i have a bad time : 309.0750 s

i have configure cactid.conf with good parameters because when i try to connect on MySQL server with MySQL administrator user, password and host are OK.
despite of that I have this error when i try to execute cactid.exe :
CACTID: MYSQL: Connection failed after 10 attempts : Access denied for user 'cacti'@'hostname' (using password: YES)

Post by **TheWitness** » Tue May 31, 2005 4:21 am

You must be running MySQL 4.1. You have a password issue, please search the forum. Then, also, make one of the release candidates (rc10) from the Announcements forum. This will resolve your issue.

Larry

a2line59 · Post by **a2line59** » Tue May 31, 2005 4:48 am

i use already this version of mysql and i have already check "old password"
because if i don't check this option, cacti does not work

Post by **TheWitness** » Tue May 31, 2005 4:54 am

Again, I suggest you "make" the cactid version. I do not think that the pre-built RPM's were designed for MySQL 4.1. If you choose the binaries, one will work and the other will not. Between Cactid 0.8.6c and 0.8.6d on of them will work.

Larry

a2line59 · Post by **a2line59** » Tue May 31, 2005 6:54 am

sorry i didn't understand that in the precedent post
I tried to "make" cactid 0.8.6c
I use Cygwin and when i execute "./configure" i have some errors messages :

$ $ ./configure
checking build system type... i686-pc-cygwin
checking host system type... i686-pc-cygwin
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... no
checking for gawk... (cached) gawk
checking for gcc... no
checking for cc... no
checking for cc... no
checking for cl... no
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details.

i add in attachment config.log

why have i this problem ? because i used the same thing to use rrdtool and i have no problem

BSOD2600 · Post by **BSOD2600** » Tue May 31, 2005 11:19 am

Just like the error message says, you don't have a compiler installed. In the Cygwin setup tool, install the entire Devel catagory.

a2line59 · Post by **a2line59** » Wed Jun 01, 2005 7:23 am

some news :
finally i didn't need to "make" cacti with cygwin
i have found why cactid (package for windows) doesn't work. It's why I don't use the same user in the config.php of cacti and in config file of cactid.
now cactid is OK
but when i execute poller.php, i have always the same warning for cisco router :
06/01/2005 12:20:49 PM - CACTID: Poller[0] ASSERT: 'No Such Object available on this agent at this OID
06/01/2005 12:20:51 PM - SYSTEM STATS: Time: 23.1700 s, Method: cactid, Processes: 1, Threads: 1, Hosts: 45, Hosts/Process: 45
06/01/2005 12:20:51 PM - POLLER: Poller[0] Host[10] WARNING: Recache Event Detected for Host
06/01/2005 12:25:47 PM - RECACHE: Poller[0] STATS: Time: 296.2403 s, Hosts Recached: 39

i have always data in graph but i want resolve this warning because it grows up time of execution
if i have only 1 or 2 devices it's not a problem but here i have 40 cisco router and i have a lot devices to add.

a2line59 · Post by **a2line59** » Wed Jun 01, 2005 8:31 am

i don't know if the problem come from that but when i work on database and i make a "select * from poller" and a "select * from poller_command", i have nothing in these tables
is it normal ? when i see the description of these tables, i have the impression that these tables must contain data
when i execute poller the table "poller_command" contains data but in table "poller" nothing change it's always empty
so i suppose poller_command is a sort of temporary table
but i don't understand utilities of poller if it's empty when we execute poller and when we don't executer poller

a2line59 · Post by **a2line59** » Wed Jun 01, 2005 9:13 am

during my investigation i found that :

i study poller.php and i see we can have the warning message when $first_host" is at true and i see $first_host is at true when $last_host_id != $host_id
if i have understand, first value for $last_host_id is 0 and the value of host_id is the value you find in table "poller_reindex" and in "host"
but the first host have for host_id = 2
so i can never have first_host at false and so in this case i have always the warning message

if i have understand to have no warning message i need that my first_host has for host_id=0 and so i need to change all host_id of my host

if the problem comes from that, how i can change host_id for all my host easily ?

a2line59 · Post by **a2line59** » Wed Jun 01, 2005 10:47 am

i tried to change host_id of host but nothing change
i have always the same warning message

No data in graph ... HELP !!!

Who is online