Total Bandwidth is zero; i.e., it will not calculate...

Post general support questions here that do not specifically fall into the Linux or Windows categories.

Moderators: Developers, Moderators

Post Reply
John Rather
Posts: 9
Joined: Tue May 03, 2005 9:10 am

Total Bandwidth is zero; i.e., it will not calculate...

Post by John Rather »

OK, please tell me if I am missing something obvious. I have created several graphs for our Cisco routers. An example is attached. I am using the 'Interface - Traffic (bits/sec, Total Bandwidth)' graph template. The 'TOTAL IN/TOTAL OUT' is always '0'. What do I need to do to get it to calculate? I have looked at the graph template (didn't do anything to it) and it looks fine. Let me know if you need any more info. Everything else appears to be working great. Please help...

Thanks!

John Rather
Attachments
Region Capture.gif
Region Capture.gif (45.93 KiB) Viewed 1711 times
gunny
Posts: 5
Joined: Mon May 09, 2005 12:40 pm

Post by gunny »

Hi John,

could you please give us a hint of what you put inside the graph template?

Thanks,


Günther
John Rather
Posts: 9
Joined: Tue May 03, 2005 9:10 am

Post by John Rather »

I am using the standard graph template that comes with Cacti - Interface - Traffic (bits/sec, Total Bandwidth) - does this help:
Attachments
Region Capture2.gif
Region Capture2.gif (48.33 KiB) Viewed 1681 times
Region Capture3.gif
Region Capture3.gif (54.79 KiB) Viewed 1681 times
gunny
Posts: 5
Joined: Mon May 09, 2005 12:40 pm

Post by gunny »

At the first glance this seems to be correct. Sorry if I'm not much of help, I'm stuck with a summation problem on Cisco NBAR statistics, where calculations go completely wrong (see a post a few hours older than yours).

I did not experience anything like this on a default interface however.

The last hints I could give you:
- check your cacti version, there have been different errors with older releases
- check if this could be a 64-bit-counter problem
- don't create your entries by hand and use the build-in wizards instead (I know this one sounds quite stupid, but as you see I'm still not so deep inside this stuff)
John Rather
Posts: 9
Joined: Tue May 03, 2005 9:10 am

Post by John Rather »

This still isn't working; any suggestions? I really need to get this working - please let me know if anyone needs more information to help me solve this...

Thanks!

John R.
User avatar
TheWitness
Developer
Posts: 17007
Joined: Tue May 14, 2002 5:08 pm
Location: MI, USA
Contact:

Post by TheWitness »

Version of Cacti please? Version of RRD please?

TheWitness
True understanding begins only when we realize how little we truly understand...

Life is an adventure, let yours begin with Cacti!

Author of dozens of Cacti plugins and customization's. Advocate of LAMP, MariaDB, IBM Spectrum LSF and the world of batch. Creator of IBM Spectrum RTM, author of quite a bit of unpublished work and most of Cacti's bugs.
_________________
Official Cacti Documentation
GitHub Repository with Supported Plugins
Percona Device Packages (no support)
Interesting Device Packages


For those wondering, I'm still here, but lost in the shadows. Yearning for less bugs. Who want's a Cacti 1.3/2.0? Streams anyone?
John Rather
Posts: 9
Joined: Tue May 03, 2005 9:10 am

Post by John Rather »

Sorry:

Cacti - 0.8.6.d
RRD - 1.0.49
w2k Advanced Server SP4
MySQL - 4.1.11

This was a fresh install about two weeks ago...

Please let me know if you need anything else...

Thanks!

John R.
John Rather
Posts: 9
Joined: Tue May 03, 2005 9:10 am

Post by John Rather »

OK, this still isn't working - can anyone please give me some recommendations...

Thank you!

John R.
User avatar
TheWitness
Developer
Posts: 17007
Joined: Tue May 14, 2002 5:08 pm
Location: MI, USA
Contact:

Post by TheWitness »

Please provide IM account in Personal Message, and we can work this out online.

TheWitness
True understanding begins only when we realize how little we truly understand...

Life is an adventure, let yours begin with Cacti!

Author of dozens of Cacti plugins and customization's. Advocate of LAMP, MariaDB, IBM Spectrum LSF and the world of batch. Creator of IBM Spectrum RTM, author of quite a bit of unpublished work and most of Cacti's bugs.
_________________
Official Cacti Documentation
GitHub Repository with Supported Plugins
Percona Device Packages (no support)
Interesting Device Packages


For those wondering, I'm still here, but lost in the shadows. Yearning for less bugs. Who want's a Cacti 1.3/2.0? Streams anyone?
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest