cannot see any graphics

[castilloj]

I have created many graphs but when i try to see it a cannto see anything. When I click the icon tool the message i see is the following:

c:\rrdtool\rrdtool.exe graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="caliope - Traffic - 172.26.0.1 (en1; Product: n)" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="bits per second" \
DEF:a="C\:\Archivos de programa\Apache Group\Apache2\htdocs\cacti/rra/caliope_traffic_in_13.rrd":traffic_in:AVERAGE \
DEF:b="C\:\Archivos de programa\Apache Group\Apache2\htdocs\cacti/rra/caliope_traffic_in_13.rrd":traffic_out:AVERAGE \
CDEF:cdefa=a,8,* \
CDEF:cdefe=b,8,* \
AREA:cdefa#00CF00:"Inbound" \
GPRINT:cdefa:LAST:" Current\:%8.2lf %s" \
GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s\n" \
LINE1:cdefe#002A97:"Outbound" \
GPRINT:cdefe:LAST:"Current\:%8.2lf %s" \
GPRINT:cdefe:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefe:MAX:"Maximum\:%8.2lf %s"

[TheWitness]

Cacti does not support filenames with spaces. Please move your web root to somewhere else. I suggest something like "C:/wwwroot/cacti"

TheWitneww

[castilloj]

I have done what you have suggested to my and I have move the apache server to c:\apache\apache2 but it doesn´t work. The message now when I try to see the graph is somethin similar to what I posted. I can see somethin like a bug in the line DEF. If you see
DEF:a="C\:\Apache\Apache2\htdocs\cacti/rra/caliope_traffic_in_14.rrd":traffic_in:AVERAGE \
What about C\:\ ?
Can you help me with this ?

:\rrdtool\rrdtool.exe graph - \
--imgformat=PNG \
--start=1115278934 \
--end=1115365334 \
--title="caliope - Traffic - 128.0.3.1 (en0; Product: n)" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
COMMENT:"From 2005/05/05 09:42:14 To 2005/05/06 09:42:14\c" \
COMMENT:"\n" \
--vertical-label="bits per second" \
DEF:a="C\:\Apache\Apache2\htdocs\cacti/rra/caliope_traffic_in_14.rrd":traffic_in:AVERAGE \
DEF:b="C\:\Apache\Apache2\htdocs\cacti/rra/caliope_traffic_in_14.rrd":traffic_out:AVERAGE \
CDEF:cdefa=a,8,* \
CDEF:cdefe=b,8,* \
AREA:cdefa#00CF00:"Inbound" \
GPRINT:cdefa:LAST:" Current\:%8.2lf %s" \
GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s\n" \
LINE1:cdefe#002A97:"Outbound" \
GPRINT:cdefe:LAST:"Current\:%8.2lf %s" \
GPRINT:cdefe:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefe:MAX:"Maximum\:%8.2lf %s"

If you see the lines DEF I can see something like a bug:
DEF

[TheWitness]

Pre-Checks:
1) Under Settings->Paths, please insure you are running c:\php\php-win.exe, if you are running PHP 5.x.
2) Make sure your poller is scheduled "c:\php\php.exe <path_cacti>\poller.php"

Debugging:
1) Set Logging level to DEBUG
2) Run "php.exe <path_cacti>/cmd.php" and review output
3) Run "php.exe <path_cacti>/poller.php" and review output

Post as you see fit.

TheWitness

[castilloj]

i have done what you told me but the log is empty. When I turn the graph in debug mode the response is
RRDTool Says:

ERROR: opening 'C:\Apache\Apache2\htdocs\cacti/rra/caliope_traffic_in_14.rrd': No such file or directory

It seems like the file has not generated

[BSOD2600]

View the poller cache and look for what OID caliope_traffic_in_14.rrd is trying to poll. Manually verify it is valid with snmpget or getif. You might need to reindex the interfaces for that host. Go to the device and click on the little green circle next to snmp interface query.

[rrossi07]

I have the same problems as above. I have found that puting the new cmd.php and the orig poller.php in the cacti dir will give some results if you run them by hand cmd first and then poller.

I also had caps in the schedule run command (C:\ not c:\)

Now if I run cmd.php and then poller.php I get updates to my rdd files. The poller.php still comes up with "Waiting on 2/2 pollers." after many "OK"s and I have to cancel it, but it puts new data into the files?????????????????

[qzplx]

hellow....

what about if ive got this error

C:\>D:\webserver\php\php.exe D:\webserver\www\cacti\cmd.php
Cannot find module (IP-MIB): At line 0 in (none)
Cannot find module (IF-MIB): At line 0 in (none)
Cannot find module (TCP-MIB): At line 0 in (none)
Cannot find module (UDP-MIB): At line 0 in (none)
Cannot find module (SNMPv2-MIB): At line 0 in (none)
Cannot find module (SNMPv2-SMI): At line 0 in (none)
Cannot find module (UCD-SNMP-MIB): At line 0 in (none)
Cannot find module (UCD-DEMO-MIB): At line 0 in (none)
Cannot find module (SNMP-TARGET-MIB): At line 0 in (none)
Cannot find module (SNMP-VIEW-BASED-ACM-MIB): At line 0 in (none)
Cannot find module (SNMP-COMMUNITY-MIB): At line 0 in (none)
Cannot find module (UCD-DLMOD-MIB): At line 0 in (none)
Cannot find module (SNMP-FRAMEWORK-MIB): At line 0 in (none)
Cannot find module (SNMP-MPD-MIB): At line 0 in (none)
Cannot find module (SNMP-USER-BASED-SM-MIB): At line 0 in (none)
Cannot find module (SNMP-NOTIFICATION-MIB): At line 0 in (none)
Cannot find module (SNMPv2-TM): At line 0 in (none)
Content-type: text/html
X-Powered-By: PHP/4.3.10

[TheWitness]

The error with the SNMP error messages can be solved two different ways:

1) Create the MIBDIRS environment variable and point it to the MIBS directory
2) Install Net SNMP (minus its agent) and poing the MIBDIRS variable at it's MIBS directory.

TheWitness