After upgrade to 1.2.27 rrd files only getting nan

Post support questions that directly relate to Linux/Unix operating systems.

Moderators: Developers, Moderators

Post Reply
Jestt
Posts: 14
Joined: Mon Nov 20, 2023 10:19 am

After upgrade to 1.2.27 rrd files only getting nan

Post by Jestt »

Just what the subject says.

Updated to 1.2.27 from 1.2.25 and the values written to the rrd files were all nan, and therefore wouldn't display on the graph or anything.

I have done data source debug, the rrd files are being updated, I checked the snmpwalk command it does to see if it works and it does, checked the credentials etc.

No idea why the data is nan, but its hard to test as boost seems to limit writing to rrd files.

Would really appreciate any suggestions.

Thanks.
Last edited by Jestt on Thu Sep 19, 2024 4:40 am, edited 1 time in total.
Jestt
Posts: 14
Joined: Mon Nov 20, 2023 10:19 am

Re: After upgrade to 1.2.27 rrd files only getting nan

Post by Jestt »

Debug not completed after 5 pollings.

Failed fields: last_result, valid_data, rra_timestamp2

RRDfile not updated after polling

Data Source was not polled
Jestt
Posts: 14
Joined: Mon Nov 20, 2023 10:19 am

Re: After upgrade to 1.2.27 rrd files only getting nan

Post by Jestt »

It appears to be stuck processing the data for a long time.

2024/09/19 11:00:37 - POLLER: Poller[1] PID[1228] Processing Poller Output with 40000 maximum items to be processed

This over and over
Rno
Cacti Pro User
Posts: 704
Joined: Wed Dec 07, 2011 9:19 am

Re: After upgrade to 1.2.27 rrd files only getting nan

Post by Rno »

Did you use spine or cmd.php ?
Any error in the log ?
And on cacti_stderr.log ?
Test
Almalinux
php 8.2.14
mariadb 10.6.16
Cacti 1.2.27
Spine 1.2.27
RRD 1.7.2
thold 1.8
monitor 2.5
syslog 3.2
flowview: 3.3
weathermap 1.0 Beta
Jestt
Posts: 14
Joined: Mon Nov 20, 2023 10:19 am

Re: After upgrade to 1.2.27 rrd files only getting nan

Post by Jestt »

I managed to fix it, it was related to spine.conf having wrong credentials.

However I reverted to 1.2.25, so I need to go to 1.2.27
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests