Template needed for APC AP7811B single phase metered rack PDUs.

[jburysom]

Hello there,

I'm looking for a template that will work with the APC AP7811B single phase metered rack PDUs. Does anyone have any templates they got working with this PDU by chance?

I have pulled down the following templates from the forum post https://forums.cacti.net/about7612.html and have been unsuccessful in getting this to graph any data. Its from 2005 using cacti version 0.8.6.d (pretty old stuff)

Any help or suggestions would be appreciated

Thanks,

[macan]

Since 1.2.25 we have templates APC_InfraStruXure_PDU.xml.gz and APC_InfraStruXure_InRow_CRAC.xml.gz directly in cacti installation.

You can try them. I can't tell if they'll work for your device

[jburysom]

Thanks for your response. I was able to use the following xml files I found searching the forums. They seem to work with the exception of the overload threshold value. I need to compare the OID value in the template with what I believe the OID value is in the MIB. I may just need to update the value - not sure. From browsing the forums it seems other had have trouble with the overload threshold value displaying.

This is the Link to the forum post in 2021 that I used to download the templates. APC Power Distribution Units (PDU 780x, 790x, etc.)

viewtopic.php?t=61847

Thanks!

[macan]

Not all UPS have all information. Maybe your UPS doesn't have overload threshold in snmp.
The best way is download APC SNMP MIB and try to find it.