Graph of one device not showing

Post general support questions here that do not specifically fall into the Linux or Windows categories.

Moderators: Developers, Moderators

Post Reply
sunny2468
Posts: 2
Joined: Thu Feb 22, 2024 6:17 am

Graph of one device not showing

Post by sunny2468 »

Hello, Recently we have added on 48 port Aruba 8100 switch but graphs are not showing. Other added all devices are working fine and also graph is visible.
Attachments
cacti.JPG
cacti.JPG (43.7 KiB) Viewed 453 times
User avatar
macan
Cacti Guru User
Posts: 1137
Joined: Tue Mar 18, 2008 2:30 am
Location: Czech

Re: Graph of one device not showing

Post by macan »

Try to enable device debug and show log. You can try change "Maximum OIDs Per Get Reques" for this device (try 5-20).

Which cacti version?
Let the Cacti grow!
sunny2468
Posts: 2
Joined: Thu Feb 22, 2024 6:17 am

Re: Graph of one device not showing

Post by sunny2468 »

@macan We are using Version 0.8.8h. We have increase Maximum OID's Per Get Request to 100 but still graphs are not showing.
User avatar
macan
Cacti Guru User
Posts: 1137
Joined: Tue Mar 18, 2008 2:30 am
Location: Czech

Re: Graph of one device not showing

Post by macan »

I think that 100 is too high. 0.88 is very old, hard to debug. Increase log verbosity and check cacti log.
Let the Cacti grow!
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests