Where to update "<path_rra>"

[macan]

thank you for your email.
yes i ran poller.php file manaully i donot see such statment in my logs. am attaching the log for your kind perusal
thanks alot in advacne..
am in very critical situation as you know existing version is vulnerable.

your poller has to run every 5 minutes, set it in cron.
There is nothing fundamentally wrong with the log.
You should increase ping and snmp timeouts for few devices:
SNMP WARNING: SNMP Error:'Timeout (500 ms)', Device:'212.107.....

Try to set Bulk walk maximum repetitions (management-> devices-> choose any-> Bulk Walk Maximum Repetitions to autodetect/set on first re-index and do reindex

[Mohammedejaz]

Thank you, I appreciate your response.
I did as instruct, moving all of the RRD files to a new location and giving the cacti 24 hours to display the graphs, I see still the graphs are blank,
Note: we have about 700 devices, it is impractical to configure each one device manual; instead, we mostly rely on auto migration.
Also, as you can see, some SNMP timeouts occur that’s because of still having SNMP disabled on all the routers. except 3.

refer to the attached logs, and snippets of my testing scenarios, thanks in advance for your kind assistance in regards.

[macan]

show result of these commands:
grep "SYSTEM STATS" /path/to/cacti/log/cacti.log

grep -i "not empty" /path/to/cacti/log/cacti.log

[Mohammedejaz]

root@scacti ~]# grep "SYSTEM STATS" cactilog1
2023-10-24 12:16:06 - SYSTEM STATS: Time:84.7754 Method:cmd.php Processes:5 Threads:1 Hosts:54 HostsPerProcess:11 DataSources:9666 RRDsProcessed:200
[root@scacti ~]# grep -i "not empty" cactilog1
2023-10-24 12:14:41 - POLLER: Poller[1] PID[19752] WARNING: Poller Output Table not Empty. Issues: 737, DS[5626, 5626, 5625, 5625, 5624, 5624, 5622, 5622, 11160, 11160, 10805, 10805, 10639, 10639, 10469, 10469, 10344, 10344, 10299, 10299], Additional Issues Remain. Only showing first 20
[root@scacti ~]#

[macan]

Poller output table not empty, please read here:

viewtopic.php?p=293176&hilit=Poller+Out ... le#p293176

[TheWitness]

The cli utility splice_rrd.php does just that. You just need to either have patience, or setup some parallel process.

[Mohammedejaz]

I waited almost 24 hours nothing happened. still the same issue graphs are blank.
therefore, now i am going with the fresh O/S and Cacti instllation.

thank you for all the help provided.


will updated...

[macan]

I'm preparing howto convert from 5 min poller to 1 min. It will be done in few days

[fafraname]

anyone has this issue earlier and it was solved. it looks to me new version of cacti has some bug. myindigocard
jjsploit download