communicatin of RDC and main poller after changing firewall.

pahlevanzadeh · Post by **pahlevanzadeh** » Wed Apr 26, 2023 8:21 am

I have 3 RDC and a main poller. They works fine, my co-worker had a change to fortigate and all of my access dead.
I added all rdc:3306 to main poller and main_poller:3306 to main poller.
But I get the following error per device.

macan · Post by **macan** » Wed Apr 26, 2023 8:52 am

enabled NAT in firewall rule on fortigate? I mean on portforward rule from outside

pahlevanzadeh · Post by **pahlevanzadeh** » Thu Apr 27, 2023 3:15 pm

I disabled NAT‌for each rules of RDC‌.

macan · Post by **macan** » Fri Apr 28, 2023 12:46 am

check cacti logs

phalek · Post by **phalek** » Fri Apr 28, 2023 5:02 am

The main poller needs to be able to connect to the RDC using http as well.

pahlevanzadeh · Post by **pahlevanzadeh** » Sat Apr 29, 2023 12:13 am

I can telnet to RDCes from main poller on port 80.

phalek · Post by **phalek** » Sat Apr 29, 2023 2:26 am

SELinux could also prevent this

pahlevanzadeh · Post by **pahlevanzadeh** » Sat Apr 29, 2023 4:13 am

I don't have SELinux.

Cacti

communicatin of RDC and main poller after changing firewall.

communicatin of RDC and main poller after changing firewall.

Re: communicatin of RDC and main poller after changing firewall.

Re: communicatin of RDC and main poller after changing firewall.

Re: communicatin of RDC and main poller after changing firewall.

Re: communicatin of RDC and main poller after changing firewall.

Re: communicatin of RDC and main poller after changing firewall.

Re: communicatin of RDC and main poller after changing firewall.

Re: communicatin of RDC and main poller after changing firewall.

Who is online