Cisco router - BGP Updates graphs don't work

[bmfmancini]

Glad to hear its working!!

On the cosmetic thing both width and height are the same in the template for me for both state and updates


You can modify that in the graph template if you want it different

[haflinger]

I took a look at RRDtool commands for both graphs. I can see the differences:

BGP peer updates:

Code: Select all

/usr/bin/rrdtool graph - \
--imgformat=PNG \
[cut]
--height=120 \
--width=500 \
[cut]

BGP state:

Code: Select all

/usr/bin/rrdtool graph - \
--imgformat=SVG \
[cut]
--height=200 \
--width=700 \
[cut]

I changed in the template for "BGP peer updates" to what "BGP state" has and everything looks great!

Thanks again for your time and help! Have a nice weeekend!

[TheWitness]

Just go to Console > Templates > Graph and switch the sizes. Note to Sean: 700x200 is the standard right now.

[haflinger]

I did it in the following way:

update.JPG (32.5 KiB) Viewed 1217 times

I hope this is a good way

Thank you for your support and answer.

[Osiris]

If you have to do it to 20 templates, doing from the table view is easier, but you are fine doing one at a time too.