I am monitoring trafic through two opnsense firewalls Once trafic is established I shut the iperf tool down
Code: Select all
[ 5] 77.00-78.00 sec 34.5 MBytes 289 Mbits/sec 0 213 KBytes
[ 5] 78.00-79.00 sec 40.6 MBytes 341 Mbits/sec 0 213 KBytes
[ 5] 79.00-80.00 sec 26.9 MBytes 226 Mbits/sec 0 213 KBytes
[ 5] 80.00-81.00 sec 29.2 MBytes 245 Mbits/sec 0 213 KBytes
[ 5] 81.00-82.00 sec 32.6 MBytes 274 Mbits/sec 0 213 KBytes
[ 5] 82.00-83.00 sec 40.5 MBytes 340 Mbits/sec 0 213 KBytes
[ 5] 83.00-84.00 sec 35.9 MBytes 301 Mbits/sec 0 213 KBytes
[ 5] 84.00-85.00 sec 43.9 MBytes 368 Mbits/sec 0 213 KBytes
[ 5] 85.00-86.00 sec 41.0 MBytes 344 Mbits/sec 0 213 KBytes
[ 5] 86.00-87.00 sec 44.4 MBytes 373 Mbits/sec 0 213 KBytes
[ 5] 87.00-88.00 sec 42.0 MBytes 352 Mbits/sec 0 213 KBytes
[ 5] 88.00-89.00 sec 45.4 MBytes 380 Mbits/sec 0 213 KBytes
[ 5] 89.00-90.00 sec 42.5 MBytes 357 Mbits/sec 0 213 KBytes
^C[ 5] 90.00-90.85 sec 37.9 MBytes 374 Mbits/sec 0 213 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
I don’t understand the behavior, since my .rrd updates successfully every minutes once I break the bandwidth iperf test the next update (the one at 22:20 184-185%) must show bandwidth as zero ?
Images above show the bandwidth comes up as intermediates values progressivly decreasing to show a full available link at 22:22 (which is really very laggy)
Does my poller/1-minute polling is not working or is it normal cacti weathermap behavior ?
(hope my query is understandable)
thx you