iDirect(VSAT) network using cacti as NMS

[thuo]

You do not need to import that,its put there incase you want to plot anything else by using oid.

[sohel2020]

You do not need to import that,its put there incase you want to plot anything else by using oid.

Hi Thuo,
I have successfully graphs my template from your .zip fle. Everything was ok but i am not getting RX Traffic and Tx traffic Graph value.

Please see the attached file.
I am using cacti 0.8.8b with spine poler.

Anyway, do you have another template where i can see Rx and Tx value in a single graph?

[sohel2020]

I am giving you some debug log result:

01/22/2015 01:52:04 PM - CMDPHP: Poller[0] Host[17] DS[2436] SNMP: v1: 10.110.110.100, dsname: rxtcp, oid: .1.3.6.1.4.1.13732.1.4.1.1.2.33679584, output: U
01/22/2015 01:52:04 PM - CMDPHP: Poller[0] Host[17] DS[2436] WARNING: Result from SNMP not valid. Partial Result: U
01/22/2015 01:52:04 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'10.110.110.100', and OID:'.1.3.6.1.4.1.13732.1.4.1.1.2.33679584'
01/22/2015 01:52:04 PM - POLLER: Poller[0] CACTI2RRD: /usr/bin/rrdtool update /usr/share/cacti/rra/idirect_nms_rxtcp_2435.rrd --template rxhttp:rxicmp:rxigmp:rxother:rxudp:rxtcp 1421913122:U:U:U:U:U:U
01/22/2015 01:52:04 PM - CMDPHP: Poller[0] Host[17] DS[2435] SNMP: v1: 10.110.110.100, dsname: rxhttp, oid: .1.3.6.1.4.1.13732.1.4.1.1.6.33679170, output: U
01/22/2015 01:52:04 PM - CMDPHP: Poller[0] Host[17] DS[2435] WARNING: Result from SNMP not valid. Partial Result: U
01/22/2015 01:52:04 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'10.110.110.100', and OID:'.1.3.6.1.4.1.13732.1.4.1.1.6.33679170'
01/22/2015 01:52:04 PM - CMDPHP: Poller[0] Host[17] DS[2435] SNMP: v1: 10.110.110.100, dsname: rxicmp, oid: .1.3.6.1.4.1.13732.1.4.1.1.4.33679170, output: U
01/22/2015 01:52:04 PM - CMDPHP: Poller[0] Host[17] DS[2435] WARNING: Result from SNMP not valid. Partial Result: U
01/22/2015 01:52:04 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'10.110.110.100', and OID:'.1.3.6.1.4.1.13732.1.4.1.1.4.33679170'
01/22/2015 01:52:04 PM - CMDPHP: Poller[0] Host[17] DS[2435] SNMP: v1: 10.110.110.100, dsname: rxigmp, oid: .1.3.6.1.4.1.13732.1.4.1.1.5.33679170, output: U
01/22/2015 01:52:04 PM - CMDPHP: Poller[0] Host[17] DS[2435] WARNING: Result from SNMP not valid. Partial Result: U
01/22/2015 01:52:04 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'10.110.110.100', and OID:'.1.3.6.1.4.1.13732.1.4.1.1.5.33679170'
01/22/2015 01:52:04 PM - CMDPHP: Poller[0] Host[17] DS[2435] SNMP: v1: 10.110.110.100, dsname: rxother, oid: .1.3.6.1.4.1.13732.1.4.1.1.7.33679170, output: U
01/22/2015 01:52:04 PM - CMDPHP: Poller[0] Host[17] DS[2435] WARNING: Result from SNMP not valid. Partial Result: U
01/22/2015 01:52:04 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'10.110.110.100', and OID:'.1.3.6.1.4.1.13732.1.4.1.1.7.33679170'
01/22/2015 01:52:04 PM - CMDPHP: Poller[0] Host[17] DS[2435] SNMP: v1: 10.110.110.100, dsname: rxudp, oid: .1.3.6.1.4.1.13732.1.4.1.1.3.33679170, output: U
01/22/2015 01:52:04 PM - CMDPHP: Poller[0] Host[17] DS[2435] WARNING: Result from SNMP not valid. Partial Result: U
01/22/2015 01:52:04 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'10.110.110.100', and OID:'.1.3.6.1.4.1.13732.1.4.1.1.3.33679170'
01/22/2015 01:52:04 PM - CMDPHP: Poller[0] Host[17] DS[2435] SNMP: v1: 10.110.110.100, dsname: rxtcp, oid: .1.3.6.1.4.1.13732.1.4.1.1.2.33679170, output: U
01/22/2015 01:52:04 PM - CMDPHP: Poller[0] Host[17] DS[2435] WARNING: Result from SNMP not valid. Partial Result: U
01/22/2015 01:52:04 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'10.110.110.100', and OID:'.1.3.6.1.4.1.13732.1.4.1.1.2.33679170'

[thuo]

>what nms version?
>try change to snmp v2 you check or try use cmd poller.
> you can combine the graphs (read on that from cacti forums)

[sohel2020]

>what nms version?
>try change to snmp v2 you check or try use cmd poller.
> you can combine the graphs (read on that from cacti forums)

After Changing snmp v2 it work

Thanks you guys

[sohel2020]

>what nms version?
>try change to snmp v2 you check or try use cmd poller.
> you can combine the graphs (read on that from cacti forums)

thuo i think you send me a private message but still i am not allow to read private because i am new in this forum.

please send it to the below email:
sohel2020@gmail.com

[dhrisht]

Hi All,

Anyone succeeded plotting iDirect Sat Traffic graph?

I am using Version iDX 3.3.3.1.

Thanks in advance.

[jpdeboer]

Hi,

I am working on creating a custom dashboard to monitor idirect remotes, now i am having some trouble with the stats like rxtcp etc. I get a wierd vaulue back, which i believe needs a calculation to get the correct kbps value. Does someone happen to know what this calculation should be ?

Thanks in advance!

[dhrisht]

Hello,

We are in need of a freelancer who can build cacti for our iDirect hub and need your proposal. We are using latest cacti version

[yugranabhat]

Hello,

We are in need of a freelancer who can build cacti for our iDirect hub and need your proposal. We are using latest cacti version

Hi,
I have already created Cacti for my iDirect system. If you have iDirect system with NMS system as Primay & Backup mode( not distributed NMS system) and require cacti for it, Kindly contact me on below email
gukripal@yahoo.com

Thanks in advance.

[kaamho9]

snmp error is typically not a cacti problem and instead something with the device you're trying to poll. Are you sure snmp is properly configured on it? Verified data retrieval?

get-mobdro.com

[closen]

Hello everyone,
First thank you very much for this forum page, it helped me a lot.
I've done everything. Cacti and iDirect are successfully connect with snmp.
I followed the guide that Thuo posted here.
RX-Snr graph is working well.
But for TX and RX trafic I've a problem.
For some reasons I've a lot of nan values :

Capture.PNG (144.91 KiB) Viewed 1540 times

When I go to console - Troubleshooting - Data source and I run a check for RX Trafic for example :

Capture1.PNG (6.11 KiB) Viewed 1540 times

The data source can find the data so why I can't see them on the graph ?
Even if I think the data are too high, I first want to see them on the graph.
Then I'll deal with high values problem ...
Do you guys have any idea about this problem ?
Best regards,