Help with data query

[snuz]

Hi guys,

I have a problem because I have an OID that if I execute snmpwalk works like this:

Code: Select all

nicolas@nicolas-HP-ProBook-450-G7:~$ snmpwalk -v2c -c public x.x.x.x 1.3.6.1.4.1.2011.6.128.1.1.2.43.1.9
iso.3.6.1.4.1.2011.6.128.1.1.2.43.1.9.4194304000.0 = STRING: "blabla"
iso.3.6.1.4.1.2011.6.128.1.1.2.43.1.9.4194304000.1 = STRING: "blabla"
iso.3.6.1.4.1.2011.6.128.1.1.2.43.1.9.4194304000.2 = STRING: "dwhw"
iso.3.6.1.4.1.2011.6.128.1.1.2.43.1.9.4194304000.3 = STRING: "efrwgher"
iso.3.6.1.4.1.2011.6.128.1.1.2.43.1.9.4194304256.0 = STRING: "htrdhdr"
iso.3.6.1.4.1.2011.6.128.1.1.2.43.1.9.4194304768.0 = STRING: "hehehb"
iso.3.6.1.4.1.2011.6.128.1.1.2.43.1.9.4194305536.0 = STRING: "hehhw"
iso.3.6.1.4.1.2011.6.128.1.1.2.43.1.9.4194305536.1 = STRING: "fgdgr"
iso.3.6.1.4.1.2011.6.128.1.1.2.43.1.9.4194305536.2 = STRING: "erfgdfh"
iso.3.6.1.4.1.2011.6.128.1.1.2.43.1.9.4194305536.3 = STRING: "gerutrbgf"
iso.3.6.1.4.1.2011.6.128.1.1.2.43.1.9.4194305536.4 = STRING: "gfdh"
iso.3.6.1.4.1.2011.6.128.1.1.2.43.1.9.4194306304.0 = STRING: "hdrte"

If I do the Data query, it returns only the values with index 0....Someone could help me? I have just done lots of tests but I don't know how to do this.

I attach the xml

huawei.xml

[TheWitness]

Here is what I can say:

1) You did not attach the XML file
2) You did not properly articulate your problem
3) So, you won't get much more help until you get 1) & 2) right.

[snuz]

I'm so sorry I modified the post and the xml and I haven't attached the xml yet, I try to explain better the problem.

If i run the snmpwalk of the oid, it returns the values that I write above. If I run the data query, it doesn't returns all values and it doesn't graph anything despite the values are returned.

XML:

huawei.xml

(1.05 KiB) Downloaded 34 times

[snuz]

i found an old topic and I solved, thanks a lot anyway

[TheWitness]

Okay, perfect. You should link to it here.