How to configure new graphs for 95%

[kriton]

Hi, running Cacti 1.2.14 on FreeBSD. There is currently 1 graph of a router that has 95% (In/Out bits 95th). For some reason, when wanting to create another new graph for a new device (has device template set to Cisco Router) we do not see the template for Interface - Traffic. Consequently we are unable to make any new graphs for interface traffic. This is due to clicking the device, add graph template, the Interface templates are not in the dropdown list.

When clicking 'create graphs for this device' and changing Graph Types from 'Graph Template Based' to SNMP - Interface Statistics', Data Query below it states:

This Data Query returned 0 rows, perhaps there was a problem executing this Data Query.You can run this Data Query in debug mode From there you can get more information.

Clicking the Data Query debug link produces:

Data Query Debug Information
Total: 0.000000, Delta: 0.000000, Found data query XML file at '/usr/local/share/cacti/resource/snmp_queries/interface.xml'
Total: 0.000000, Delta: 0.000000, Running Data Query [1].
Total: 0.000000, Delta: 0.000000, Found Type = '3' [SNMP Query].
Total: 0.000000, Delta: 0.000000, XML file parsed ok.
Total: 0.000000, Delta: 0.000000, Executing SNMP get for num of indexes @ '.1.3.6.1.2.1.2.1.0' Index Count:
Total: 0.010000, Delta: 0.000000, Executing SNMP walk for list of indexes @ '.1.3.6.1.2.1.2.2.1.1' Index Count: 0
Total: 0.010000, Delta: 0.000000, No SNMP data returned
Total: 0.000000, Delta: 0.000000, Found data query XML file at '/usr/local/share/cacti/resource/snmp_queries/interface.xml'
Total: 0.000000, Delta: 0.000000, Running Data Query [1].
Total: 0.000000, Delta: 0.000000, Found Type = '3' [SNMP Query].
Total: 0.000000, Delta: 0.000000, XML file parsed ok.
Total: 0.000000, Delta: 0.000000, Executing SNMP get for num of indexes @ '.1.3.6.1.2.1.2.1.0' Index Count:
Total: 0.010000, Delta: 0.000000, Executing SNMP walk for list of indexes @ '.1.3.6.1.2.1.2.2.1.1' Index Count: 0
Total: 0.010000, Delta: 0.000000, No SNMP data returned

The graph templates for traffic are definitely present:

Code: Select all

Interface - Traffic (bits/sec, 95th) 	31 	No 	2 	200x700 	PNG 	bits per second 	
Interface - Traffic (bits/sec, BW) 	32 	Yes 	0 	200x700 	PNG 	bits per second 	
Interface - Traffic (bits/sec) 	2 	Yes 	0 	200x700 	PNG 	bits per second 	
Interface - Traffic (bytes/sec, BW) 	33 	No 	5 	200x700 	PNG 	bytes per second 	
Interface - Traffic (bytes/sec) 	25 	Yes 	0 	200x700 	PNG 	bytes per second

Perhaps someone can let us know how to go about having the above templates available when creating new graphs for device.

Thanks.

[TheWitness]

You may have a restrictive snmpd.conf. I use simple ones. For example my snmpd.conf is exactly this:

rocommunity public

One line, that's it.