THOLD 1.4

[Lalbee99]

I take it there is no desire to investigate why this condition occurs only on the newer version THOLD 1.4.

[Lalbee99]

This code does more than display very small numbers. It changes the whole interpretation of the tholds tab from an easy to read percentage to a numerical value with a data type designation (K,M,G). This does not make it easier for an operator to interpret.

[Lalbee99]

Yet another issue with THOLD 1.4 . The "Warning - High/Low Settings" Should be optional but for some reason "Min Trigger Duration" is set to 5 mins by default with no option for "never".

[cigamit]

You can try this patch.

https://github.com/Cacti/plugin_thold/c ... 8704672bcf

This adds an option per threshold (or template) to allow the displaying of Units or not (defaults to false).

[cigamit]

Yet another issue with THOLD 1.4 . The "Warning - High/Low Settings" Should be optional but for some reason "Min Trigger Duration" is set to 5 mins by default with no option for "never".

Just leaving the High or Low values blank should cause it to ignore it.

[Lalbee99]

Is anyone planning on correcting the problem with the THOLD plugin. The changes that were made to it have totally made an Operators ability to quickly determine what percentage a filesystem is at a nightmare. If I go back to THOLD 1.21 the problem goes away. Obviously I do not want to run on old versions of the plugin . I reported this issue back in Oct of 2020.

[cigamit]

I believe an option was introduced in the latest Thold to fix the display for people that don't want units. If that doesn't work for you, then there may be something completely different going on.

[Lalbee99]

You keep saying that but the only change was the upgrade of the THOLD plugin from 1.21 to 1.5 (now). All I want is my percentages back so the thold view is self explanatory.

[cigamit]

I can not reproduce your issue with my installs on the latest versions. My percentages work just fine.

thold1.png (53.62 KiB) Viewed 10135 times

thold2.png (12.19 KiB) Viewed 10135 times