Problem with an OID

[snuz]

Hi guys,
I have this OID: 1.3.6.1.4.1.9.9.91.1.1.1.1.4 (from CISCO-ENTITY-SENSOR-MIB), the result of the snmpwalk is a series of values ​​that do not interest me, only some I need.
How could I do?? I need a regex or is there another way?
And then I would need to align those values ​​with other indexes, is it possible?
Thank you in advance!

Snuz

[snuz]

Someone could help me?

[TheWitness]

Read up on how to write a data query. This is the best thing to do. The Cacti doco is pretty good.

[snuz]

The problem is another, because I would like to take the example of monitorable interfaces and next to each interface put the output value of the optical rx with OID 1.3.6.1.4.1.9.9.91.1.1.1.1.4 (from CISCO-ENTITY-SENSOR-MIB). But the indexes are different, so I don't know how to do

[TheWitness]

You would NOT extend the interfaces Data Query, but rather write a new Data Query for measurements under that OID tree. So, to do this you have to become familiar with the OID Tree structure, and how to express that as a Data Query. The Cacti documentation has some examples. You will simply have to work through them and then through trial and error, become an expert.

[snuz]

Ok I did it but now the title of the graph is not complete (maybe the name is too long ??) I attach some images for allow you to understand.




In this image you could see that the title is not complete:


How could I do for display the full name of the graph?? I absolutely need it to recognize the graphed port

[TheWitness]

Console > Configuration > Settings > Visual > Max Title Length.

You may have to "Re-apply Suggested Names" from the Graph Dropdown. Maybe not.

[snuz]

I don't know why but it still doesn't work... I also tried to reapply suggested names