What ever you do but the graphs are not growing and stuck on either 140, 80 etc

[Saji1980]

Hi!

Nothing is working to have graphs growing above 80 M or 140 M on different devicces.

Running latest cacti-1.2.12-1.el7.
Snmp2
64bit templates.
Change the Data source to high values.
I tested with FortiGate, Dlink, Aruba models

Reported this many times and I can see many other users are having the same problem. Not sure how this will fix.

Thanks

[bmfmancini]

Interesting I have a mix like that on Cacti not experiencing the same issues

Can you paste the output of your poller cache for a device doing this ?
Lets make sure that the OID's being requested by the poller are indeed 64bit pollers

are you using spine or cmd.php ?

[Saji1980]

Hi!

Sorry I gave up on this one and remove Cacti as the graph were not growing after doing the tricks.
Now I installed it after 3 months of break to see if it makes any difference.
Lets try with the new one I have installed as its graphing the same device.


Can you paste the output of your poller cache for a device doing this ?

FW01 - Traffic - 10.1.1.10 - port2 FW01 SNMP Version: 2, Community: test01, OID: .1.3.6.1.2.1.31.1.1.1.6.13
RRD: /usr/share/cacti/rra/fw01_traffic_in_42.rrd

Its using 64bit


Its using cmd.php