Devices not up or triggered in cacti's monitor

If you figure out how to do something interesting/cool in Cacti and want to share it with the community, please post your experience here.

Moderators: Developers, Moderators

Post Reply
mrusydi2020
Posts: 3
Joined: Fri May 22, 2020 5:01 am

Devices not up or triggered in cacti's monitor

Post by mrusydi2020 »

Guys, need help urgent

We just implemented cacti for our network monitoring tool, but some of our network (devices) still not up (Red in cacti's monitor)

We already restart mikrotik, but still no results

Ping dan Tracert success to all this mikrotik

Please help...
cigamit
Developer
Posts: 3367
Joined: Thu Apr 07, 2005 3:29 pm
Location: B/CS Texas
Contact:

Re: Devices not up or triggered in cacti's monitor

Post by cigamit »

You aren't giving us much to go by at all.

Did you enable SNMP on the Mikrotik? What does the device settings look like in Cacti? What version of Cacti?
mrusydi2020
Posts: 3
Joined: Fri May 22, 2020 5:01 am

Re: Devices not up or triggered in cacti's monitor

Post by mrusydi2020 »

@cigamit tq for the response

We use 1.2.5 version

Yes we have done set SNMP enabled, from 200 network only 10 network/mikrotik did not up in cacti's monitor

i attach our cacti device setting

Thank you
Attachments
Device_Setting4.png
Device_Setting4.png (43.6 KiB) Viewed 6478 times
Device_Setting3.png
Device_Setting3.png (34.91 KiB) Viewed 6478 times
Device_Setting2.png
Device_Setting2.png (32.13 KiB) Viewed 6478 times
Device_Setting1.png
Device_Setting1.png (36.57 KiB) Viewed 6478 times
cigamit
Developer
Posts: 3367
Joined: Thu Apr 07, 2005 3:29 pm
Location: B/CS Texas
Contact:

Re: Devices not up or triggered in cacti's monitor

Post by cigamit »

Cacti clearly shows that it is not responding to SNMP. Did you try swapping to Version 2? All my Mikrotiks tend to like it better than Version 1 for some reason.

Can you do a SNMP Walk of the device from the Cacti server? Can you show us the SNMP Config in the Mikrotik itself?
mrusydi2020
Posts: 3
Joined: Fri May 22, 2020 5:01 am

Re: Devices not up or triggered in cacti's monitor

Post by mrusydi2020 »

Thank you @cigamit for your response

We already use version 2

SNMP Walk like this:

----------------------- New Test -----------------------
Paessler SNMP Tester - 20.1.58 Computername: CACTI Interface: (10.0.9.99)
5/28/2020 2:27:12 PM (7 ms) : Device: 10.6.15.1
5/28/2020 2:27:12 PM (13 ms) : SNMP v1
5/28/2020 2:27:12 PM (19 ms) : Uptime
5/28/2020 2:27:14 PM (2039 ms) : SNMP Datatype: ASN_UNIVERSAL
5/28/2020 2:27:14 PM (2045 ms) : -------
5/28/2020 2:27:14 PM (2051 ms) : DISMAN-EVENT-MIB::sysUpTimeInstance = No response (check: firewalls, routing, snmp settings of device, IPs, SNMP version, community, passwords etc) (SNMP error # -2003) ( 0 seconds )
5/28/2020 2:27:16 PM (4070 ms) : SNMP Datatype: ASN_UNIVERSAL
5/28/2020 2:27:16 PM (4076 ms) : HOST-RESOURCES-MIB::hrSystemUptime.0 = No response (check: firewalls, routing, snmp settings of device, IPs, SNMP version, community, passwords etc) (SNMP error # -2003) ( 0 seconds )
5/28/2020 2:27:16 PM (4082 ms) : Done


----------------------- New Test -----------------------
Paessler SNMP Tester - 20.1.58 Computername: CACTI Interface: (10.0.9.99)
5/28/2020 2:27:27 PM (11 ms) : Device: 10.5.59.1
5/28/2020 2:27:27 PM (18 ms) : SNMP v1
5/28/2020 2:27:27 PM (25 ms) : Uptime
5/28/2020 2:27:29 PM (2041 ms) : SNMP Datatype: ASN_UNIVERSAL
5/28/2020 2:27:29 PM (2048 ms) : -------
5/28/2020 2:27:29 PM (2056 ms) : DISMAN-EVENT-MIB::sysUpTimeInstance = No response (check: firewalls, routing, snmp settings of device, IPs, SNMP version, community, passwords etc) (SNMP error # -2003) ( 0 seconds )
5/28/2020 2:27:31 PM (4072 ms) : SNMP Datatype: ASN_UNIVERSAL
5/28/2020 2:27:31 PM (4080 ms) : HOST-RESOURCES-MIB::hrSystemUptime.0 = No response (check: firewalls, routing, snmp settings of device, IPs, SNMP version, community, passwords etc) (SNMP error # -2003) ( 0 seconds )
5/28/2020 2:27:31 PM (4087 ms) : Done


Thank you
Rusydi
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests