1G graphs are not increasing more than 40M and 10G graphs are not increasing more than 130 M

[Saji1980]

Hello Guys!

This is my second post with similar issue. I have done so many testing but nothing is working. Even I installed totally fresh Cacti with deleting all old mariadb and sql stuff.
I am using In/Out Bits (64-bit) with snmp v2.
OS Version: CentOs 7
Cacti version: 1.2.11
Max speed is set to |query_ifSpeed|
My php.ini date.timezone = Europe/Stockholm but Main poller is showing Europe/Moscow.

Nothing I can think of anything else to check as I cannot find much more then this. Whatever it was on google I already tried.

timedatectl status
Local time: Fri 2020-05-01 04:33:53 CEST
Universal time: Fri 2020-05-01 02:33:53 UTC
RTC time: Fri 2020-05-01 02:33:53
Time zone: Europe/Stockholm (CEST, +0200)
NTP enabled: yes
NTP synchronized: yes
RTC in local TZ: no
DST active: yes
Last DST change: DST began at
Sun 2020-03-29 01:59:59 CET
Sun 2020-03-29 03:00:00 CEST
Next DST change: DST ends (the clock jumps one hour backwards) at
Sun 2020-10-25 02:59:59 CEST
Sun 2020-10-25 02:00:00 CET

I appriciate if someone can help in this case.

Thanks

[TheWitness]

Many types of interfaces report inaccurate ifHighSpped and ifSpeed values. It thats the case, you will have to set the max value manually.

[TheWitness]

Also, make sure you are using the 64bit counter graphs. If your device does not support them, then you will have to use a more frequent poller interval.