Get Mounted Partitions

[mrscary]

I am working on a brand new installation.. i setup a remote host to poll, so i can pull stats like the NIC, CPU, memory, and hard drive space.
on every host i attempt, i see 0 on mounted partitions.. im dizzy from staring at config files and such.. anyone got any ideas?

[TheWitness]

Add the following to your snmpd.conf

disk /
disk /tmp
disk /blah

Restart snmpd and the re-index.

[mrscary]

forgot to mention, i think.. my cacti runs on windows.

[mrscary]

FYI my verbose running of the "get mounted partitions" gives me this as a result


Total: 0.000000, Delta: 0.000000, Found data query XML file at 'C:/inetpub/wwwroot/cacti/resource/script_server/host_disk.xml'
Total: 0.000000, Delta: 0.000000, Running Data Query [9].
Total: 0.000000, Delta: 0.000000, Found Type = '6' [Script Query - Script Server].
Total: 0.000000, Delta: 0.000000, XML file parsed ok.
Total: 0.260000, Delta: 0.260000, Executing script for num of indexes '"c:\php\php.exe" -q C:\inetpub\wwwroot\cacti\scripts\ss_host_disk.php "10.2.2.2" "35" "1:161:500:1:10:public::::::" "num_indexes"'
Total: 0.260000, Delta: 0.000000, Found number of indexes: 0
Total: 0.490000, Delta: 0.220000, ERROR: Data Query returned no indexes.

[TheWitness]

Run that script by hand, and get off windows.

[cigamit]

Wait, you said this
"so i can pull stats like the NIC, CPU, memory, and hard drive space" but then you showed that you can't pull hard drive space (mounted partitions). So which is it?

[mrscary]

i did an SNMP walk using the OIDs in the ss host disk php file, and i got results.
i dont know how to run that PHP script at the command line itself. ill keep digging.

[mrscary]

cig.. sorry i can pull those stats, EXCEPT hard drive partitions via this version of cacti.. on my previous installation, i had zero problems doing so.
only major difference between my old cacti system and this one.. the only system was win 7, this is win 10.

[mrscary]

I think I know where my issue MIGHT be....
I THINK its NET-SNMP being a bugger.. i can run SNMPWALK with OIDs, but not with the scripts in CACTI itself.

That said, i started looking at NET-SNMP to see if i could pinpoint a problem there.
I sometimes take a step back and read someone else's "getting started guide". that said, i was looking at this
http://shallwelearn.com/blog/set-up-net ... n-windows/
and in one of his first steps, he has you run

snmpconf –i
and then continue on with the setup.. etc etc.
this is where i stopped, as i see the error you see below:

Warning: Perl module Win32::Registry is not installed. This module is required to read the SNMPSHAREPATH and SNMPCONFPATH values from the registry. To use snmpconf without the module you need to
define SNMPSHAREPATH and SNMPCONFPATH as environment variables
or use the -c and -I command line options.

anyone here think this might be related to my issue? I tried to find a newer version of NET-SNMP but there isn't a 64 bit installer above 5.50 that i can find.

[netniV]

I would just install the perl module since net-snmp wants it.

[mrscary]

ive been trying to figure out how to do exactly that.

[mrscary]

ive been trying to figure out how to do exactly that.

[mrscary]

i went out to activestate.. i didnt see you can add packages like the net-snmp part to it. i didnt have to do that before. creatings that package now

[mrscary]

i got the perl module installed for net-snmp.
still no joy on trying to get info on the partitions. the verbose query shows:
Total: 0.000000, Delta: 0.000000, Found data query XML file at 'C:/inetpub/wwwroot/cacti/resource/script_server/host_disk.xml'
Total: 0.000000, Delta: 0.000000, Running Data Query [9].
Total: 0.000000, Delta: 0.000000, Found Type = '6' [Script Query - Script Server].
Total: 0.000000, Delta: 0.000000, XML file parsed ok.
Total: 0.220000, Delta: 0.220000, Executing script for num of indexes '"c:\php\php.exe" -q C:\inetpub\wwwroot\cacti\scripts\ss_host_disk.php "server" "8" "1:161:500:1:10:public::::::" "num_indexes"'
Total: 0.220000, Delta: 0.000000, Found number of indexes: 0
Total: 0.470000, Delta: 0.240000, ERROR: Data Query returned no indexes.

If i run SNMPWALK against that host, it returns this.. and that OID i took from the ss_host_disk.php file
smpwalk -v 1 -c public 10.1.2.2 .1.3.6.1.2.1.25.2.3.1 .5
HOST-RESOURCES-MIB::hrStorageSize.1 = INTEGER: 0
HOST-RESOURCES-MIB::hrStorageSize.2 = INTEGER: 363991039
HOST-RESOURCES-MIB::hrStorageSize.3 = INTEGER: 0
HOST-RESOURCES-MIB::hrStorageSize.4 = INTEGER: 196562
HOST-RESOURCES-MIB::hrStorageSize.5 = INTEGER: 98295

[cigamit]

Why does your output say this
"c:\php\php.exe" -q C:\inetpub\wwwroot\cacti\scripts\ss_host_disk.php "server" "8" "1:161:500:1:10:public::::::" "num_indexes"'

That should be an ip address or a resolvable name. Do you have the hostname set correctly in Cacti?