[SOLVED]Aggregate Graph Question - Help

[eholz1]

Hello All,
I have an aggregate graph with 8 devices, 2 ports each (in and out).
I am using a graph template that prints the output on the negative axis.

My graph template - has NO LINE values in it. If I create the aggregate with either the output check boxes deselected
or the input check boxes deseleted - I get a graph displayed with no lines - showing input as stacked areas on positive axis.
OR if input is deselected and output is selected - I get a good area display on the negative axis.

When I select both the input items and the output items - I see lines on both the positive and negative axis.
What is happening here?

Here is a graph from the aggregate with the output checkboxes unchecked providing aggregate for input sources only:

cacti_in_only.JPG (19.21 KiB) Viewed 1036 times

Here is a graph with input choices de-selected - hence - outbound traffic only

cacti_out_only.JPG (21.08 KiB) Viewed 1036 times

And here is what happens when both Inbound and Outbound are selected:

cacti_aggreate_in_and_out.JPG (24.74 KiB) Viewed 1036 times

Notice the Lines for both axes - In and out - I would like to not have those lines.

I am using two different color templates each with different colors, one for inbound and one for outbound traffic, etc.

I looked at the graph creation code, and near the bottom of the file - there are two LINE statements

It there any way to create an aggregate graph without those lines?

Thanks,

eholz1