Special Token Error [WMWARN05]

Support questions about the Network Weather Map plugin

Moderators: Developers, Moderators

Post Reply
aboorijin
Posts: 3
Joined: Wed Mar 04, 2020 9:52 am

Special Token Error [WMWARN05]

Post by aboorijin »

Hello Everyone,

Althought i dont use special token, i got below error. Any ideas?

configs/CMS_CGL.conf: ProcessString: {link:this:bandwidth_out:%2k} refers to unknown item (context is lInk:3850_K1-CGL_Palo) [WMWARN05]

Thx
User avatar
Howie
Cacti Guru User
Posts: 5508
Joined: Thu Sep 16, 2004 5:53 am
Location: United Kingdom
Contact:

Re: Special Token Error [WMWARN05]

Post by Howie »

That's weird. The bwlabels also use tokens so that is where it will be coming from. But bandwidth_in should always be defined!

Which weather map version?
Weathermap 0.98a is out! & QuickTree 1.0. Superlinks is over there now (and built-in to Cacti 1.x).
Some Other Cacti tweaks, including strip-graphs, icons and snmp/netflow stuff.
(Let me know if you have UK DevOps or Network Ops opportunities, too!)
aboorijin
Posts: 3
Joined: Wed Mar 04, 2020 9:52 am

Re: Special Token Error [WMWARN05]

Post by aboorijin »

Thx Howie. I have been using Cacti 0.88a with Weathermap 0.97a for about 3 years on Centos 6. Finally i decided to upgrade to Cacti 1.2.8 with Centos 7, Cacti is OK, upgraded successfully. However i could not find a way to use weathermap (even with 0.88h Cacti on Centos 7) as a last chance i tried to install weathermap (0.98) standalone but no joy, and still getting above "Special Token Error" . Map is being generated and colours on links are ok but BWlabel is always zero, there is no special label config, all is default, your help is highly appreciated.
Note: Using PHP 5.5 (since getting another error on version php7.x)
User avatar
Howie
Cacti Guru User
Posts: 5508
Joined: Thu Sep 16, 2004 5:53 am
Location: United Kingdom
Contact:

Re: Special Token Error [WMWARN05]

Post by Howie »

OK, well 0.98a has been out for a while now. It has a bunch of bugfixes, and works with PHP 7 (but not Cacti 1.x)

BWlabel is always 0? Not "[UNKNOWN]"? That's also weird!

Could you try with 0.98a standalone, please? After that, maybe PM me the map config to see if I can recreate the issue? (along with the output with the --debug flag)
Weathermap 0.98a is out! & QuickTree 1.0. Superlinks is over there now (and built-in to Cacti 1.x).
Some Other Cacti tweaks, including strip-graphs, icons and snmp/netflow stuff.
(Let me know if you have UK DevOps or Network Ops opportunities, too!)
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests