(Resolved )Custom Data query graph works in realtime view but not regular poller

[bmfmancini]

Hey Guys

I made a simple data source to graph optical levels
here is my query

It's been a while since I've run into this issue I usually have good luck creating my custom graphs and queries this one is being a bit difficult

Here is the setup

just 2 queries on for the sfp to find out if its internally or externally calibrated
and the OID for the light levels

<interface>
<oid_index>.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.40</oid_index>
<index_order>calb:OptiPort</index_order>
<fields>



<calb>
<name>Calibration type</name>
<method>walk</method>
<output_format>value</output_format>
<source>value</source>
<direction>input</direction>
<oid>.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.40</oid>
</calb>
<OptiPort>
<name>Optical Port Selection</name>
<method>walk</method>
<output_format>value</output_format>
<source>value</source>
<direction>input-output</direction>
<oid>.enterprises.6527.3.1.2.2.4.31.1.21.1</oid>
</OptiPort>
</fields>
</interface>


The graphs create wihtout issues but all NAN unless in realtime view where it works fine

doing a debug on the data source shows Last U and Value NaN
Permission are fine

I have the data query set to get SNMP indexed pointing to the graph template as a data source
so what is realtime doing differnt than the poller that it can get the graph working but the poller cant ?

Thanks guys !

[bmfmancini]

Any ideas on this anyone ???

[netniV]

More than likely a permission issue with the RRD directory.

[bmfmancini]

Permissions are fine

It's just this query and template that I'm having a problem with

I wish it was always something easy like permissions lol

[netniV]

It still sounds like permissions to me. The only real difference between the two is that Realtime doesn't go via the RRD's. And the poller often uses a different user to the http daemon.

[bmfmancini]

In my setup the killer is using the apache user
But let me triple Check

[bmfmancini]

wow for the typo lol killer = poller

I checked graph permissions they are good the DS comes back with NaN so not getting any values

nan.JPG (58.77 KiB) Viewed 3479 times

the graph template works fine as well since realtime generated the graph
head-scratcher on this one

[bmfmancini]

Here is the output of the query





Data Query Debug Information
Total: 0.000000, Delta: 0.000000, Found data query XML file at '/var/www/html/cacti/resource/snmp_queries/nokia-optical.xml'
Total: 0.000000, Delta: 0.000000, Running Data Query [25].
Total: 0.010000, Delta: 0.000000, Found Type = '3' [SNMP Query].
Total: 0.010000, Delta: 0.000000, XML file parsed ok.
Total: 0.010000, Delta: 0.000000, <oid_num_indexes> missing in XML file, 'Index Count Changed' emulated by counting oid_index entries
Total: 0.770000, Delta: 0.760000, Executing SNMP walk for list of indexes @ '.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.40' Index Count: 1
Total: 0.770000, Delta: 0.000000, Index found at OID: '.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.40.1.35684352' value: '2'
Click to show Data Query output for field 'OptiInt'
Total: 0.770000, Delta: 0.000000, Located input field 'OptiInt' [walk]
Total: 0.930000, Delta: 0.160000, Executing SNMP walk for data @ '.enterprises.6527.3.1.2.2.4.2.1.6.1.35684352'
Found item [OptiInt='1/1/1'] index: 35684352 [from value]
Click to show Data Query output for field 'calb'
Total: 0.930000, Delta: 0.000000, Located input field 'calb' [walk]
Total: 1.580000, Delta: 0.650000, Executing SNMP walk for data @ '.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.40'
Found item [calb='2'] index: 35684352 [from value]
Click to show Data Query output for field 'OptiPort'
Total: 1.580000, Delta: 0.000000, Located input field 'OptiPort' [walk]
Total: 2.410000, Delta: 0.840000, Executing SNMP walk for data @ '.enterprises.6527.3.1.2.2.4.31.1.21.1'
Found item [OptiPort='366'] index: 35684352 [from value]
Total: 2.430000, Delta: 0.020000, Checking for Sort Field change. No changes detected.
Total: 2.430000, Delta: 0.000000, Update Data Query Sort Cache complete
Total: 2.840000, Delta: 0.410000, Index Association with Local Data complete
Total: 2.960000, Delta: 0.120000, No Index Changes Detected, Skipping Re-Index and Poller Cache Re-population
Total: 3.010000, Delta: 0.050000, Automation Execution for Data Query complete
Total: 3.020000, Delta: 0.000000, Plugin Hooks complete

[bmfmancini]

Ok so I adjusted my query it now looks like this

<interface>
<oid_index>.1.3.6.1.2.1.2.2.1.1</oid_index>
<index_order>OptiPort:calb:OptiInt</index_order>
<oid_num_indexes>.1.3.6.1.2.1.2.1.0</oid_num_indexes>

<fields>

<ifIndex>
<name>Index</name>
<method>walk</method>
<source>value</source>
<direction>input</direction>
<oid>.1.3.6.1.2.1.2.2.1.1</oid>
</ifIndex>
<OptiInt>
<name>Optical Interface</name>
<method>walk</method>
<output_format>value</output_format>
<source>value</source>
<direction>input</direction>
<oid>.enterprises.6527.3.1.2.2.4.2.1.6.1</oid>
</OptiInt>
<calb>
<name>Calibration type</name>
<method>walk</method>
<output_format>value</output_format>
<source>value</source>
<direction>input</direction>
<oid>.1.3.6.1.4.1.6527.3.1.2.2.4.31.1.40</oid>
</calb>
<OptiPort>
<name>Optical levels</name>
<method>walk</method>
<output_format>value</output_format>
<source>value</source>
<direction>input-output</direction>
<oid>.enterprises.6527.3.1.2.2.4.31.1.21.1</oid>
</OptiPort>

</fields>
</interface>


this is to include the interface index as well
now the DS is reporting last value of 0 as of the last poll which is a good sign
lets see what happens

[bmfmancini]

well that was short lived
the data source now reports NaN again

[bmfmancini]

Oh here is the graph debug output as well


RRDtool Command:

/bin/rrdtool graph - \
--imgformat=PNG \
--start='-86400' \
--end='-60' \
--pango-markup \
--title='******* -- Optical Levels' \
--slope-mode \
--base=1000 \
--height=150 \
--width=500 \
--rigid \
--alt-autoscale-max \
--lower-limit='-40' \
COMMENT:"From 2019/12/09 14\:03\:10 To 2019/12/10 14\:02\:10\c" \
COMMENT:" \n" \
--color BACK#F3F3F3 \
--color CANVAS#FDFDFD \
--color SHADEA#CBCBCB \
--color SHADEB#999999 \
--color FONT#000000 \
--color AXIS#2C4D43 \
--color ARROW#2C4D43 \
--color FRAME#2C4D43 \
--border 1 --font TITLE:11:'Arial' \
--font AXIS:8:'Arial' \
--font LEGEND:8:'Courier' \
--font UNIT:8:'Arial' \
--font WATERMARK:6:'Arial' \
--slope-mode \
DEF:a='/var/www/html/cacti/rra/*****':MAX \
DEF:b='/var/www/html/cacti/rra/****':LAST \
CDEF:cdefa='a,10000,/,LOG,10,*,2.303,/' \
CDEF:cdefb='b,10000,/,LOG,10,*,2.303,/' \
LINE1:cdefa#E42217FF: \
GPRINT:cdefb:LAST:'DB%8.2lf%s\n'

RRDtool Says:

OK

[netniV]

When editing the data source, does your RRD match the expected list of sources?

[bmfmancini]

sorry not following

the query is exporting the OptiPort field to the grah template

nokiad.JPG (26.67 KiB) Viewed 3470 times

Here is the graph template import items

nokiad1.JPG (91.1 KiB) Viewed 3470 times

Here is the data source template

nokiad2.JPG (83.81 KiB) Viewed 3470 times

This is what the data source looks like when attached to a device

nokiad4.JPG (75.51 KiB) Viewed 3470 times

[bmfmancini]

oh and just for refernce here is the RRA file permissions

-rw-r--r-- 1 apache apache 321K Dec 11 14:55 xxxxxxxx_nokia_optical_93453.rrd

[netniV]

What user does your poller run as from cron?