DOCSIS 3.0 CMTS Templates

[sergiomc22]

Thank you very much.
I'm importing the xml you said (cacti_host_template_cmts_-_generic.xml), but i get these error.

+ Unmet Dependency: (Data Template) Interface - Errors/Discards
+ Unmet Dependency: (Data Template Item) errors_in
+ Unmet Dependency: (Data Template Item) discards_in
+ Unmet Dependency: (Data Template Item) discards_out
+ Unmet Dependency: (Data Template Item) errors_out

Is it normal?

Thanks

Sergio

[sergiomc22]

Im getting this RRDtool error:

RRDTool Command:

/bin/rrdtool graph - \
--imgformat=PNG \
--start='-86400' \
--end='-300' \
--title='CMTS CASA - Traffic - CATV-MAC 1 - MAC Domain 1' \
--rigid \
--base='1000' \
--height='120' \
--width='500' \
--upper-limit='40000000' \
--lower-limit='0' \
--vertical-label='bits per second' \
--slope-mode \
--font TITLE:10: \
--font AXIS:7: \
--font LEGEND:8: \
--font UNIT:7: \
DEF:a='/var/www/html/cacti/rra/casa_vitarte1_traffic_out_3665.rrd':'traffic_out':LAST \
CDEF:cdefa='a,8,*' \
CDEF:cdefe='a,8,*,31000000,GE,a,8,*,UNKN,IF' \
CDEF:cdeff='a,8,*,35000000,GE,a,8,*,UNKN,IF' \
AREA:cdefa#002A97FF:'Outbound' \
GPRINT:cdefa:LAST:'Current\:%8.2lf %s' \
GPRINT:cdefa:AVERAGE:'Average\:%8.2lf %s' \
GPRINT:cdefa:MAX:'Maximum\:%8.2lf %s\n' \
AREA:cdefe#FFF200FF:'BW > 80%' \
AREA:cdeff#FF0000FF:'BW > 90%'

RRDTool Says:

ERROR: the RRD does not contain an RRA matching the chosen CF

[sergiomc22]

Hi.
Im using Cacti 0.8.8h but I can't get to work the templates.
Any help? Thanks.

[cardori]

Do you have a template to monitoring a maximum of 8 upstream SNR at the same time using the OIDs?
I can not make it possible to use your templates.