OID to get the traffic rate of the swithes interfaces

salmanJ · Post by **salmanJ** » Mon May 06, 2019 1:41 am

Hi,

I am using Cacti as SNMP server to poll information from my network switches.
I want to get the graph of traffic passing through the switches interfaces (traffic rate of interfaces). Please confirm the OID to calculate the interfaces traffic rate. Currently I am using OID 1.3.6.1.2.1.31.1.1.1.10

The problem is, I am getting the graph of the physical interfaces through this OID but unable to get the complete graph of LAG interfaces. For LAG interfaces, I am getting breaks in the graph and it is not continuous.

Moreover, my LAG interfaces are bundle of 4x100G interfaces and the traffic rate at any time for these interfaces is not showing above 100G.

Please suggest solution

Regards,
Salman

netniV · Post by **netniV** » Fri May 17, 2019 3:51 pm

The OIDs for your lag interface will most likely be specific to your switch vendor. You can normally find these by googling for the MIBs of your model. If you are seeing gaps that may be because you are monitoring the physical ports individually rather than the cumulative one.

Base64 · Post by **Base64** » Sun Sep 22, 2019 8:31 pm

Hey, can you send me a template? Can you tell me how to do it?

camerabob · Post by **camerabob** » Mon Sep 23, 2019 9:54 am

Check to see that you don't have a maximum set on that template to 100G. Looks like you do.

Cacti

OID to get the traffic rate of the swithes interfaces

OID to get the traffic rate of the swithes interfaces

Re: OID to get the traffic rate of the swithes interfaces

Re: OID to get the traffic rate of the swithes interfaces

Re: OID to get the traffic rate of the swithes interfaces

Who is online